6-shaft moulder, with 22 cm. bench and ruled bench for short pieces. Automatic left shaft: it adjusts automatically according to the width of the...
Moulders, Second hand
SCM Foratrice per falegname, orizzontale e verticale, a 39 mandrini
924109
Boring machines, Second hand
Comec Drilling Milling Machine Comec for bed sides or similar n. 2 vertical drilling groups with 4 bits each n. 2 horizontal drilling groups with 2...
Boring machines, Milling machines, Second hand
Valex G1000 Hobby Lathe Volt. 220
924097
Woodturning lathes, Second hand
Camam ZS Single knurling machine for straight and round elements
924154
Chamfering machines, Second hand
Vertical drilling machine with 2 adjustable spindles
106116
Boring machines, Second hand
Camam US/1C Chair Equalizer
924134
Crosscut saws, Second hand
Comec FRV / 1 Moulder milling machine
924159
Milling machines, Spindle moulding machines, Second hand
Wigo Double squaring machine with 3 groups per side, complete with Inverters. - right and left circular saw - right and left cutter - right and left...
Sliding table saws, Second hand
Bacci Double Mortiser with 1 Bit per Side
924031
Mortising machines, Second hand
Camam SI/PM Hydraulic pre-assembly clamp for assembling wooden chairs, consisting of 2 clamps and 1 hydraulic power unit
924121
Clamping machines, Second hand
Camam ZS Single knurling machine for flat and round pieces of chairs or similar
924124
Chamfering machines, Second hand
Camam ZD/I Double knurling machine for round chair spindles or similar, with loader
924123
Chamfering machines, Second hand
Hydraulic cutter for Rifile and similar Roller cm. 49 Maximum height of the piece cm. 25 complete with loading roller conveyor
924126
Wood shredders, Second hand
Bag suction system with 72 filter sleeves and 6 collection bags
924115
Aspiration systems, Second hand
Chip aspiration filter, with automatic filter cleaning (backwash with blowers and Macair panel) with 1 bag.
924114
Aspiration systems, Second hand
Weinig Profimat 22 4-shaft. Left movable shaft with measurement sensor, for automatic movement based on the width of the workpieces inserted in the...
Moulders, Second hand
Compressor Atlas copco Ga 410 Second hand
924065
Compressors, Second hand
Hot air generator (water/air heat exchanger) brand Elsinea S.r.l., flow rate mc/hour 1,000, potential calories/hour 10,500 with a 0.5 hp engine of...
Hot air generators, Second hand
2-spindle vertical drilling machine that can be used alongside the machine for foundation bolts code 106194
Boring machines, Second hand
Strapex brand strapping machine model VTS44, year of construction 2001, CE marked, with infeed and outfeed rollers, complete with manual and wiring...
Packing machines, Second hand
Comec double drilling and mortising machine Horizontal spindles: n.4 spindles (right + left) with 2 oscillations Vertical spindles n. 3 right heads...
Mortising machines, Second hand
Orma press model PFS/5, CE marked. 3000x1500 mm table, used. Tables heated with high frequency (HF generator not included).
106032
Presses, Second hand
PRIMULTINI band saw with 100 cm flywheel
Saws - Multi-blade - Miter saws
Primultini cast iron band saw with 100 cm flywheel. with tilting bench...
Band saws, Second hand
SCM L'Invincibile spindle moulder saw with carriage
cod. 925003
Spindle moulding machines, Second hand
Horizontal belt sander
cod. 924150
Stroke Sanders, Second hand
Bacci TSD Double Rounding Tenoning Machine with Loader
Bacci
TSD
Cod. 923010
Tenoning machines, Second hand
Automatic lathe loader cutter
Cod. 900097
Crosscut saws, Second hand
Sander for electronic elements, Promac brand, complete with soundproof cabin, used.
Ideal machine for sanding elements on 4 sides (see technical...
Sanding machines, Second hand
2-spindle log bolt inserter for table legs
106194
Boring and inserting machines, Second hand
Robot manipulator brand Comau model SMART H5 XL,
year of production 2003,
complete with vacuum table for handling flat pieces and accessories...
Stacking device, Second hand
Comec FM/OV2000 CAF Horizontal and vertical drilling machine with vertical saw units.
3 vertical saw units
2 vertical drilling heads
2...
Boring machines, Second hand
Battery-powered electric lift, BT Opal brand, model OM - year of construction 2002, marked (CE), used.
003058
Forklifts, Second hand
Hydraulic clamp with power unit and 2 pistons
924128
Clamping machines, Second hand
Camam SI/PM Pair of hydraulic clamps pre-assembly for chairs
924152
Clamping machines, Second hand
Comec 3 Spindle Vertical Drilling Machine
924108
Boring machines, Second hand
Motorized conveyor belt, net length cm. 270 width 80, with pedal-controlled two-piston tipper.
used
Sharpener for moulder knives
Code: 400347
Stacking device, Second hand
Landonio TMU 1200 Lathe
Landonio
TMU 1200
922058
Woodturning lathes, Second hand
Sicma Double horizontal and vertical mortiser. 2 right and left horizontal spindles 2 right side vertical spindles 2 left side vertical spindles 3...
Mortising machines, Second hand
Machining center Scm Tech 99l Second hand
924113
Machining centers, Second hand
Camam ZS Single Knurling Machine
924057
Chamfering machines, Second hand
Robot manipulator brand Comau model SMART H5 XL, year of production 2003, complete with vacuum table for handling flat pieces and accessories...
Stacking device, Second hand
Camam 4 Spindle Vertical Mortising Machine
924143
Mortising machines, Second hand
Moulder brand Weinig, mod. 22A Unimatic Workbench width: 220 mm, with ribbed bench for short pieces. Cardan drive. Motor composition and power: Lower...
Moulders, Second hand
Bacci Double Mortiser with 1 bit per side
924142
Mortising machines, Second hand
Comec Camam
Double horizontal and vertical mortising machine
2 double horizontal spindles 3 vertical spindles right side 3 vertical spindles...
Mortising machines, Second hand
Spindle moulder saw with 250 cm carriage
924071
Spindle moulding machines, Second hand
2 pin inserters to be fixed (70% functional)
Note:
In the white car 2 out of 4 guns work.
The green machine works but has the gun to fix...
Boring and inserting machines, Second hand
Friulmac FN7 1300 Cutting-off Milling Machine for Parquet Heads or Similar Products
924125
Crosscut saws, Milling machines, Second hand
Slat belts for drying painted products
Dimensions:
mt. 17.50 x 4
mt. 17.50 x 4
mt. 20 x 2.50
mt. 20 x 2.50
Specifications
Producer ...
Wood finishing equipment, Second hand
Camam US/1C Chair Leg Leveling Machine. Bench cm. 70x70
924137
Crosscut saws, Second hand
Hydraulic press with 1 piston
Bench dimensions cm. 250 x 127
Current working dimensions cm. 80 x 127
(max 180 x 127)
924153
Clamping machines, Second hand
Camam AF12 Horizontal and vertical double mortiser
High frequency motors
4 right vertical spindles
4 left vertical spindles
2 double...
Mortising machines, Second hand
Camam brand mortiser 4 horizontal oscillating spindles
2 types of oscillation (1 group with 3 spindles + tilting group 1 spindle) 2 belt motors 1...
Mortising machines, Second hand
