Woodworking machinery - by user - pag 59

  • Briquette machine Prodeco S50 Second hand
    Prodeco S50
    PRODECO S50 Briquette Press Briquette diameter 50 mm Main engine power 5.5 kW Efficiency up to 80-90 kg/h Very good technical and visual...
    Briquette machines, Second hand
    FHU Mateusz Guzik's picture
  • Multi rip saw Cml J250 Second hand
    CML J250
    CML J250 Multisaw Track width 250mm Maximum cutting height 80mm Anti-kickback pawls upper and lower Two feed speeds 12-24 m/min Saw size min/...
    Multi rip saws, Second hand
    FHU Mateusz Guzik's picture
  • Woodturning lathe Cosma U9 Second hand
    Cosma U9
    Profiling machine for COSMA U9 Styles Profiling from square timber Minimum length of square timber 45 cm Maximum length of square timber 400 cm...
    Woodturning lathes, Second hand
    FHU Mateusz Guzik's picture
  • Multi rip saw Gabbiani Sa300 Second hand
    Gabbiani SA300
    Gabbiani SA 300 Multisaw Track width 300mm Cutting height 100mm Spindle diameter 50mm Sleeve diameter 70mm Adjustable feed speed 5-50m/min...
    Multi rip saws, Second hand
    FHU Mateusz Guzik's picture
  • Multi rip saw Adolf john Abm ii Second hand
    Adolf John ABM II
    Adolf John ABM II multisaw Track width 160mm Cutting height 80mm Maximum saw size 250mm Two-speed feed regulated on the variator 5.5-45m/min...
    Multi rip saws, Second hand
    FHU Mateusz Guzik's picture
  • Boring machine Wiertarka Wiertarka Second hand
    Wiertarka Wiertarka
    Horizontal multi-spindle drill Number of spindles 4 Drill assembly clamping basket Drilling unit spacing adjustable min/max 165/1940mm Drilling...
    Boring machines, Second hand
    FHU Mateusz Guzik's picture
  • Sliding table saw Scm minimax S250 Second hand
    SCM MInimax S250
    SCM MiniMax S250 Table Saw Worktop 780x750mm Trolley for tabletop Maximum saw size 250mm Cutting unit adjustable at an angle of 45 Motor power...
    Sliding table saws, Second hand
    FHU Mateusz Guzik's picture
  • Boring machine Camam Fot 2m Second hand
    CAMAM FOT 2M
    CAMAM FOT 2M drilling machine Magazine feeding parts Efficiency up to 1000pcs/h The possibility of adjusting the inclination of the drilling...
    Boring machines, Second hand
    FHU Mateusz Guzik's picture
  • Surface planer Scm F410n Second hand
    SCM F410N
    SCM F410N Planer Shaft width 410mm 4-knife shaft Traditional knives Shaft with a silencing comb at the shaft Shaft cover Original guide...
    Surface planer, Second hand
    FHU Mateusz Guzik's picture
  • Multi rip saw Malaguti lodi 500 Second hand
    Malaguti Lodi 500
    Malaguti Lodi 500 Multisaw Track width 500mm Working height 100mm Anti-kickback pawls upper and lower Supported saw spindle Main engine with a...
    Multi rip saws, Second hand
    FHU Mateusz Guzik's picture
  • Multi rip saw Scm M3 Second hand
    SCM M3
    SCM M3 multi-saw Track width 300mm Cutting height max 120mm Main engine power 37kw Feed speed adjustable on the variator 6-45m/min Disc...
    Multi rip saws, Second hand
    FHU Mateusz Guzik's picture
  • Moulder Scm Compact 23 Second hand
    SCM Compact 23
    SCM Compact 23 four-sided planer Maximum planing width 230mm Maximum planing height 130mm Spindle arrangement: Bottom Right Left Top...
    Moulders, Second hand
    FHU Mateusz Guzik's picture
  • Rip saw machine Acma Dm Second hand
    ACMA DM
    ACMA DM longitudinal cutting saw Cutting length 3000mm Cutting height 90mm with a 400mm saw Maximum cutting width 550mm Maximum saw diameter...
    Rip saw machines, Second hand
    FHU Mateusz Guzik's picture
  • Spindle moulding machine Scm T130 Second hand
    SCM T130
    SCM T130 Spindle Moulder-Tenner Motor power 5.5kw Machine control from the desktop Electric spindle adjustment Side trolley for tenoning Total...
    Spindle moulding machines, Second hand
    FHU Mateusz Guzik's picture
  • Moulder Weinig Profimat 23e Second hand
    Weinig Profimat 23E
    Weinig Profimat 23E Four-sided Planer Working width 230mm Working height 120mm Number of spindles 6 Bottom 5.5kw Right 7.5kw Left Top 7.5kw...
    Moulders, Second hand
    FHU Mateusz Guzik's picture
  • Dovetailing machine Mecanobois T34 Second hand
    Mecanobois T34
    Mecanobois T34 Four-spindle tenoning machine Number of spindles 4 Spindle arrangement Saw Horizontal spindle Horizontal spindle Vertical...
    Dovetailing machines, Second hand
    FHU Mateusz Guzik's picture
  • Wide belt sander C.b 1n krt 630 Second hand
    C.B 1N KRT 630
    Wide belt sander C.B 1N KRT 630 Working width 630mm Working height max/min 3/160mm Electric height reading Electric lifting and lowering of the...
    Wide belt sanders, Second hand
    FHU Mateusz Guzik's picture
  • Four sided planer Scm P64 Second hand
    SCM P64
    Four-sided planer SCM P64 Working width 180mm Working height 100mm 4 spindles Spindle system: Bottom 4kw Right/Left 5.5kw Top 4kw Spindle...
    Four sided planers, Second hand
    FHU Mateusz Guzik's picture
  • Copy shaper machine Omec 750 Second hand
    OMEC 750
    OMEC 750 drawer joint milling machine A machine designed for making connections, including drawers and boxes The operator simultaneously sets two...
    Copy shaper machines, Second hand
    FHU Mateusz Guzik's picture
  • Sliding table saw Holzmann Tema 1500is Second hand
    Holzmann Tema 1500IS
    Holzman Tema 1500is Sliding Table Saw Carriage length 1500mm Cutting width on the right side 1110mm Cutting height max 95mm Scorer Cutting...
    Sliding table saws, Second hand
    FHU Mateusz Guzik's picture
  • Edge sanding machine Comec L/2 Second hand
    Comec l/2
    Brush polisher Comec L/2 Number of spindles: 2 Spindle length 300mm Motor power 1.5kw Variable speed of brushes on the belt Year of production...
    Edge sanding machines, Second hand
    FHU Mateusz Guzik's picture
  • Moulder Weinig Profimat 22n ats Second hand
    Weinig Profimat 22N ATS
    Weinig Profimat 22N ATS system four-sided planer Working width 220 mm Working height 120 mm Number of spindles: 6 Spindle arrangement: Bottom/...
    Moulders, Second hand
    FHU Mateusz Guzik's picture
  • Grinding machine Comec Lon ls Second hand
    Comec Lon LS
    Grinder for curved and straight elements Comec Lon LS The machine is ideal for the production of chairs, armchairs when grinding curved elements...
    Grinding machines, Second hand
    FHU Mateusz Guzik's picture
  • Moulder Weinig Unimat 23e Second hand
    Weinig Unimat 23E
    Weinig Unimat 23E Four-sided Planer Working width 230mm Working height 160mm Number of spindles 7 Spindle speed 8000r.p.m Spindle arrangement...
    Moulders, Second hand
    FHU Mateusz Guzik's picture
  • Woodturning lathe Locatelli Ariete 3 Second hand
    Locatelli Ariete 3
    Automatic lathe Locatelli Ariete 3 Length of the cant max/min 1000/200mm Dimensions of the cant max/min 85×85/20x20mm Maximum length of the...
    Woodturning lathes, Second hand
    FHU Mateusz Guzik's picture
  • Milling machine Festo Up 35 zf Second hand
    Festo UP 35 ZF
    FESTO UP35 ZF Cutter Spindle length 180mm Spindle diameter 40mm 7.5kw motor Two pneumatic material clamps Adjustable tenoning depth...
    Milling machines, Second hand
    FHU Mateusz Guzik's picture
  • Wide belt sander Scm Sandya win New
    SCM Sandya Win
    Szlifierka szerokotaśmowa SCM Sandya Win Szerokość robocza 600mm Agregat kombi z trzewikiem Oscylacja pneumatyczna Dwie prędkości posuwu...
    Wide belt sanders, New
    FHU Mateusz Guzik's picture
  • Combination machine lurem C260n Second hand
    LUREM C260N
    LUREM C260N multifunctional machine 1. Saw Cutting height 75mm Saw size 250mm Manual saw lifting cutting unit set at an angle of 45 2....
    Combination machines, Second hand
    FHU Mateusz Guzik's picture
  • Thicknessing planer Schneider 520 Second hand
    Schneider 520
    Schneider 520mm Thicknesser Working width 520mm Working height 250mm Manual lifting and lowering of the worktop 2 rollers in the worktop Shaft...
    Thicknessing planers, Second hand
    FHU Mateusz Guzik's picture
  • Moulder Weinig Profimat 22n Second hand
    Weinig Profimat 22N
    Weinig Profimat 22N four-sided planer Working width 220 mm Working height 120 mm Number of spindles: 6 Spindle arrangement: Bottom/right/left/...
    Moulders, Second hand
    FHU Mateusz Guzik's picture
  • Combination machine Sicar Brava 300 Second hand
    Sicar Brava 300
    SICAR Brava 300 multifunctional machine 1. Saw Cutting height 90mm Saw size 250mm Manual saw lifting cutting unit set at an angle of 45 2....
    Combination machines, Second hand
    FHU Mateusz Guzik's picture
  • Multi rip saw Scm M2 Second hand
    SCM M2
    SCM M2 multi-saw cutting width 220 mm cutting height 120 mm engine power: 18.5 kW saw hole diameter 70 mm maximum saw size 350 mm Adjustable...
    Multi rip saws, Second hand
    FHU Mateusz Guzik's picture
  • Combination machine Vamac 5w1 Second hand
    Vamac 5w1
    Vamac 5in1 Multifunctional Machine 1. Saw Cutting height 60mm Saw size 250mm Manual saw lifting cutting unit set at an angle of 45 2.2kw...
    Combination machines, Second hand
    FHU Mateusz Guzik's picture
  • Crosscut saw Brevetti C15 Second hand
    Brevetti C15
    Brevetti C15 double miter saw A machine designed for cutting at an angle of 45° Application for cutting: decorative frames, furniture door frames...
    Crosscut saws, Second hand
    FHU Mateusz Guzik's picture
  • Moulder Scm Compact Second hand
    SCM Compact
    Four-sided planer SCM Compact 23K Planing width 230mm Planing height 120mm Number of spindles 4 Spindle system Bottom 4kw Right Left 5.5kw...
    Moulders, Second hand
    FHU Mateusz Guzik's picture
  • Briquette machine Por A6 plus Second hand
    POR A6 PLus
    Briquette press POR A6 Plus 7.5kw Briquette diameter 60mm Round briquette Efficiency up to 100kg/h Main engine with a power of 7.5kw Hopper...
    Briquette machines, Second hand
    FHU Mateusz Guzik's picture
  • Briquette machine Prodeco E60 Second hand
    Prodeco E60
    Prodeco E60 Briquette Press Briquette diameter: 60 mm Tank diameter: 1000 mm Efficiency: 35-75 kg/h Engine power: 7.5 kW Only 681h worked...
    Briquette machines, Second hand
    FHU Mateusz Guzik's picture
  • Rip saw machine Omec Ta185 Second hand
    OMEC TA185
    OMEC TA185 crosscut saw Maximum cutting height 180mm Maximum cutting width 900mm Saw diameter 550mm Pneumatic material pressure Pneumatic saw...
    Rip saw machines, Second hand
    FHU Mateusz Guzik's picture
  • Sanding machine Bosi vittorio Lc300 Second hand
    Bosi Vittorio LC300
    Two-station grinder Oponka Number of stations 2 Spindle speed regulated by means of a variator Working width about 300mm Motor power 3kw
    Sanding machines, Second hand
    FHU Mateusz Guzik's picture
  • Wood shredder Gross Gaz 62 Second hand
    Gross GAZ 62
    Gross GAZ 62 chipper-shredder Rotor length 600mm Rotor diameter 180mm Hydraulic drawer Auto reverse Main engine with a power of 22kw Feed...
    Wood shredders, Second hand
    FHU Mateusz Guzik's picture
  • Boring machine Blum Minipress Second hand
    Blum Minipress
    BLUM Minipress furniture drill Number of drills 5 Drill attachment using quick connectors Motor power 0.75kw Pneumatic pressure Pneumatic...
    Boring machines, Second hand
    FHU Mateusz Guzik's picture
  • Moulder Weinig Profimat 22n Second hand
    Weinig Profimat 22N
    Weinig Profimat 22N Four-sided Planer Working width 220mm Working height 120 mm Number of spindles 6 Spindle arrangement Bottom 4kw Right 5....
    Moulders, Second hand
    FHU Mateusz Guzik's picture
  • Boring machine Triade Triade Second hand
    Triade Triade
    Triade drill for turned elements Number of spindles 3 Spindle arrangement: Right 3kw Left 3kw Side 0.75kw Pneumatic control Pneumatic...
    Boring machines, Second hand
    FHU Mateusz Guzik's picture
  • Sanding machine Comec Comec Second hand
    COMEC Comec
    Comec Feed Cross Sander for Chair Furniture Elements More information coming soon
    Sanding machines, Second hand
    FHU Mateusz Guzik's picture
  • Sanding machine Minimax Unilev 150 Second hand
    Minimax Unilev 150
    Minimax Unilev 150 Edge Sander Sanding belt width 150mm Sanding belt length 2170mm Work table length 1440mm Mechanical oscillation Two sanding...
    Sanding machines, Second hand
    FHU Mateusz Guzik's picture
  • Band saw Centauro R800 Second hand
    Centauro R800
    Centauro R800 Resaw Wheel diameter 800mm Maximum cutting height 400mm Maximum saw width 80mm Cutting band length approx. 5550mm Main engine...
    Band saws, Second hand
    FHU Mateusz Guzik's picture
  • Moulder Weinig Profimat 45 Second hand
    Weinig Profimat 45
    Weinig Profimat 45 four-sided planer Working width 45-450mm Working height 10-250mm Number of spindles 4 Spindle arrangement: Bottom 11kw...
    Moulders, Second hand
    FHU Mateusz Guzik's picture
  • Wide belt sander Vertongen S320 Second hand
    Vertongen S320
    Vertongen S-320 Pass-Through Sander Working width 320mm Working height 180mm Sanding unit with shoe Mechanical oscillation Two feed speeds...
    Wide belt sanders, Second hand
    FHU Mateusz Guzik's picture
  • Mortising machine Balestrini Sm Second hand
    Balestrini SM
    Balestrini SM Single-Sided Oscillating Drill One drilling unit Oscillation range up to 120mm Max tool diameter 12mm Manual top/bottom table...
    Mortising machines, Second hand
    FHU Mateusz Guzik's picture
  • Crosscut saw Brevetti Junior 250 Second hand
    Brevetti Junior 250
    Brevetti Junior 250 double frame saw Cutting width max 80mm Cutting height max 80mm Cutting at an angle of 45° Max saw size 250mm Cutting...
    Crosscut saws, Second hand
    FHU Mateusz Guzik's picture
  • Multi rip saw Scm M2 Second hand
    SCM M2
    SCM M2 multi-track saw Cutting width 220 mm Cutting height 120 mm Engine power: 18.5 kW Saw bore diameter 70 mm Maximum saw size 350 mm...
    Multi rip saws, Second hand
    FHU Mateusz Guzik's picture
  • Sanding machine Samco Univel 15 Second hand
    Samco Univel 15
    Samco Unilev 15 Edge Sander Belt dimensions 150 x 2170 mm Two belt speeds Adjustable shoe Tabletop adjustable at an angle of 0-30 degrees...
    Sanding machines, Second hand
    FHU Mateusz Guzik's picture
  • Glue spreader Osama S2r-1300 Second hand
    OSAMA S2R-1300
    OSAMA S2R-1300 Glue Rollers Working width: 1300 mm Min./max. pass height: 0-100 mm Feed speed: 18 m/min Motor: 0.37 kW CE certificate
    Glue spreaders, Second hand
    FHU Mateusz Guzik's picture
  • Wide belt sander Sac 4r-300 Second hand
    SAC 4R-300
    Top-bottom sander SAC 4R-300 Working width 300mm Working height 2.5-150mm 4 sanding units 2x bottom unit 2×5.5kw 2x top unit 2×5.5kw Top and...
    Wide belt sanders, Second hand
    FHU Mateusz Guzik's picture

Pages