CONTROL SYSTEM
• PC-based numerical control
• BiesseWorks software
TECHNICAL CHARACTERISTICS
• Useful working range in “X” (min – max): 90 – 3,...
Machining centers, Second hand
BIESSE RBO LIFTER 2T unloader
Stacking device, Second hand
Squaring-edgebanding machine Biesse Omnia sb Second hand 2008
Squaring-edgebanding machines, Second hand
MACHINE DESCRIPTION
The machine consists of a monolithic steel structure inside which the transmission and guide organs of the moving parts are...
Clamping machines, New
Used BIESSE ROVER 30 machining center
Machining centers, Second hand
CONTROL SYSTEM
• Adjustable hanging command board to control the machine
• Incorporated electrical cabinet
TECHNICAL FEATURES
• Panel...
Edgebanders, Second hand
BIESSE ROVER K 1532 bar table machining centre
Machining centers, Second hand
BIESSE SELCO WNT 650 PUSHER 2.1 single line panel saw
Beam saws, Second hand
• On-board PC-based numerical control
• Length of longitudinal cut: approx. 4,400 mm
• Length of transverse cut: approx. 2,200 mm
• Blade...
Beam saws, Second hand
Pneumatic clamp BIESSE COMIL CF 2000
Clamping machines, Second hand
FORMETAL Drawer Clamp
Clamping machines, Second hand
Numerical control PC-based – UPS – Wired remote console Software bSolid bNest software module bNest – Graphical editor for...
Machining centers, New
BIESSE RBO squaring and edgebanding line
Squaring-edgebanding machines, Second hand
Control system SMART TOUCH 7” Panel working height with straight edge (min – max): 8 – 50 mm Edge thickness in coils (min – max): 0,4 – 5 mm...
Edgebanders, Second hand
Edgebanders Biesse ergho 9 Second hand 2001
Edgebanders, Second hand
Loading and unloading system CASADEI SV + BIESSE SELECTA CP
Stacking device, Second hand
BIESSE STREAM SB2 10.5 squaring edge banding machine
Squaring-edgebanding machines, Second hand
• Height (min – max): 1150 – 1700 mm
• Length (min – max): 600 – 3000 mm
• Width (min – max): 240 – 750/800 mm
Stacking device, Second hand
BIESSE TECHNO S dowel drilling and inserting machine
Boring and inserting machines, Second hand
Automatic drilling machine BIESSE TECHNO FDT
Boring machines, Second hand
CONTROL SYSTEM
• Numerical control based on PC
• BiesseWorks Software
• Separated electrical cabinet
TECHNICAL FEATURES
•...
Machining centers, Second hand
CONTROL SYSTEM
• Numerical control PC based
• Software BIESSEWORKS
TECHNICAL FEATURES
• Useful working sizes “X” (min - max): 300 x 3.000...
Boring and inserting machines, Second hand
TERMOPAK Clamping machine Second hand
Clamping machines, Second hand
CONTROL SYSTEM
• PLC electronic control for work cycle management
TECHNICAL FEATURES
• Useful working height (min – max): 300 - 1.220 mm
•...
Clamping machines, Second hand
Through-overturner with crossed belts
• Useful panel length (min – max): 270 – 3.000 mm
• Useful panel width (min – max): 220 – 670 mm
• Useful...
Stacking device, Second hand
• Useful working width: ca. 1.300 mm
• Nr. 1 Double belt conveyor for inserting angular parts with central lifting belt
- Length: 4.200 mm...
Machining centers, Second hand
CONTROL SYSTEM
• Numerical control PC-based
• Adjustable hanging control panel for machine control
• Incorporated electrical c
• Length of...
Beam saws, Second hand
CONTROL SYSTEM
• Numerical control PC based
• Incorporated electrical cabinet
TECHNICAL CHARACTERISTICS
• Useful working dimensions in “X” (min...
Boring machines, Second hand
Machining center SCM MORBIDELLI AUTHOR 430
Machining centers, Second hand
Cutting Plant complete of:
Angular panel saw BIESSE SELCO WNAR 512
CONTROL SYSTEM
• Numerical control on PC on machine ...
Beam saws, Second hand
CONTROL SYSTEM
• NC 1000 numerical control on PC basis
TECHNICAL FEATURES
• Useful working field (x – y - z): approx. 3,432 x 1,300
• Piece...
Machining centers, Second hand
BLOWER
• Useful working width: approx. 2.500 mm
Polishing machines, Second hand
Packing line loader and unloader C.M.A. 2 PARTNER B
Stacking device, Second hand
CONTROL SYSTEM
• Numerical control on PLC basis
• Separated command board
TECHNICAL FEATURES
• Unloading longitudinal transfer approx. 4.200 mm...
Stacking device, Second hand
Drilling cell complete of nr. 2 BRE.MA. VEKTOR 25-13 R + Lateral Rototranslator
CONTROL SYSTEM
• Numerical control ALBATROS
TECHNICAL...
Boring machines, Second hand
CONTROL SYSTEM
• Electronic Control RT 483
TECHNICAL CHARACTERISTICS
• Useful working length min - max 235 - 3.200 mm
• Useful working...
Boring machines, Second hand
CONTROL SYSTEM
• Electronic control PLC for the management of the working cycle
TECHNICAL FEATURES
• Useful working length (max): 2.500 mm
•...
Roller conveyors, Second hand
CONTROL SYSTEM
• Electronic regulation
TECHNICAL FEATURES
• Useful working length (min – max): 320 mm - 3.000 mm
•...
Stacking device, Second hand
CONTROL SYSTEM
• Numerical control
• Separated electrical cabinet
TECHNICAL FEATURES
• Useful working dimensions “X” min - max 300-2.700...
Boring machines, Second hand
CONTROL SYSTEM
• Numerical control RT 480
TECHNICAL FEATURES
• Useful working length (min – max): 300 - 2.500 mm
• Useful working width (...
Boring and inserting machines, Second hand
CONTROL SYSTEM
• Electronic Control RT 483 - for automatic positioning of conveyors along “X” and of the backstops
TECHNICAL CHARACTERISTICS...
Boring machines, Second hand
CONTROL SYSTEM
• Multi-axis numerical control with PC interface
• Built-in electrical cabinet
TECHNICAL FEATURES
• Panel working width (...
Edgebanders, Second hand
GENERAL DETAILS
• Electronic control Fanuc 0M
• Useful working sizes: 2.600 x 1.500 mm
• Axis stroke: 2.700 X, 1.600 Y, 250 Z
• Nr. 6...
Machining centers, Second hand
CONTROL SYSTEM
• PC based electronic control
• Editor module
TECHNICAL FEATURES
• Useful working length (min - max): 250 mm - 2,500 mm...
Boring and inserting machines, Second hand
CONTROL SYSTEM
• Numerical control PC-based
• Separated command board
TECHNICAL FEATURES
• Useful working lenght in double or single row...
Stacking device, Second hand
CONTROL SYSTEM
• Programming and control system with the following features: color video - visualization display - "touch screen" system
• 10...
Edgebanders, Second hand
CONTROL SYSTEM
• Numerical control based on PLC
• Separate control panel
TECHNICAL FEATURES
• Useful working length in single or double...
Stacking device, Second hand
CONTROL SYSTEM
• Numerical control NC 1000 PC-based
• Separated electrical cabinet
TECHNICAL FEATURES
• Useful working dimensions “X” min...
Boring machines, Second hand
CONTROL SYSTEM
• Numerical control XNC
• Separated electrical cabinet
TECHNICAL FEATURES
• Useful working area (x-y-z): 2.700 x 1.144 x 114...
Machining centers, Second hand
Electronic control: NC 410 Deluxe
Nr. 1 Boring unit with nr. 8 vertical spindles (3 X, 5 Y)
Nr. 2 Hinges insertion unit with vibrating...
Boring and inserting machines, Second hand
Boring and inserting machine Biesse Techno s Second hand 2005
BIESSE TECHNO S
Boring and inserting machines, Second hand
SISTEMA DI CONTROLLO
• Controllo numerico
CARATTERISTICHE TECNICHE
• Area utile di lavoro “X” (min - max): 300 – 2.500 mm
• Area utile di lavoro...
Boring and inserting machines, Second hand
CONTROL SYSTEM
• Numerical control OSAI
TECHNICAL FEATURES
• Useful working area: 2.200 x 2.600 mm
• Nr. 4 Vacuum pumps of 250 m3/h
• Nr. 1...
Machining centers, Second hand
CONTROL SYSTEM
• OSAI Electronic Control
TECHNICAL FEATURES
• Nr. 2 work tables 1,600 x 1,600 mm
• Working range with joined tables: 3,200 x 1,...
Machining centers, Second hand
