CURSAL TRSI8000 OL700 series cutting line composed of:
- automatic loader with 1 column and 3 vacuum suction cups
- 6-chain horizontal feeder...
Crosscut saws, Second hand
Multirip saw with mobile blade CML model SCA320R-T350 with:
- 1 fixed blade + 1 mobile blade with motorized positioning
- 1 fixed laser + 1...
Multi rip saws, Second hand
MEBER steel band saw model 800:
- with 800mm solid flywheels
- motor kw 4 / hp 5.5, volt 380
Machine to CE standards
Band saws, Second hand
DMO motorized roller conveyor to help extract panels from single-sided edge banding machine (or other tracked machine).
CE compliant machine
Edgebanders, Second hand
PRIMULTINI cast iron spindle moulder with:
- lateral carriage for tenoning, on pole and with flag support, with tilting guide and useful stroke of...
Spindle moulding machines, Second hand
PRIMULTINI sharpener model 4.60 with 3 motors:
– for blades with widths from 60 to 260mm
– sharpening for straight, inclined, spaced teeth
– blade...
Grinding machines, Second hand
PRIMULTINI bandsaw blades bombatrice, complete with bench
Not CE compliant, for export
Grinding machines, Second hand
PADE 1000/N end milling-milling-drilling machine:
- automatic sliding work table
- D.400mm end milling blade, 3 hp motor
- milling machine...
Milling machines, Second hand
ALBERTI 5-axis machining center model POLAR EVOLUTION 3.5 CN:
– maximum working range 3500 x 1637 mm
– Z-axis stroke 600 mm, workable thickness...
Machining centers, Second hand
SCM RECORD 220 model work center:
- useful axis stroke 3250 x 1300 x 300 mm
- useful piece passage 320 mm
- multifunctional work table 3180...
Machining centers, Second hand
ORMA CE compliant disc gluing machine and conveyor:
4-roller gluing machine model I/413 with:
- useful working width 1300mm
- useful working...
Glue spreaders, Second hand
Chain and bit mortiser MUTI model OMS 4MM for locks:
Vertical group with chain, 3 hp motor
Vertical group with 2 bits, 0.75 hp motor
Horizontal...
Chain mortiser, Second hand
SBF model 3W-586 1100mm calibrator with 3 belts:
- 1st roller belt D=150mm in 90 shore rubber
- 2nd roller belt D=200mm in 65 shore rubber...
Wide belt sanders, Second hand
ORMAL (DIEFFE) square cutter model TT500 with:
fast moving blade D=500mm
7.5 hp blade motor, 380 volts
cutting section from 40x40mm to 130x140mm...
Crosscut saws, Second hand
TRADE surface planer model CM-500:
500x2840mm shelves
4-knife shaft, with CPS protection
adjustable entry and exit floors
tilting guide
rear...
Surface planer, Second hand
3 axis milling machine for wooden beams:
- ELTE motor, power KW 3.3 – 18.000rpm
- movement control on the 3 axes with PLC
- frame on wheels...
Milling machines, Second hand
Radial saw OMGA RADIAL 800, 3 hp motor, 800mm outreach
Not according to CE standards, for export
Radial arm saws, Second hand
MAGH-OMGA RADIAL 700 radial saw, 3 hp motor, 700mm outreach
Not according to CE standards, for export
Radial arm saws, Second hand
SCM edgebander model BASIC 1 :
- panel useful thickness from 8 to 40 mm
- forward speed 8 m/min
- dimensions approx. 1.7 x 0.7 x h=1.3 m...
Edgebanders, Second hand
Electric lifter OMG RANIERO model LOGOS , at CE norms
https://www.macchine-legno.com
Forklifts, Second hand
Sander with oscillating roller BOSI model SD600, BRAND NEW, with:
- tiltable motor HP 2
- rotation speed 1400/2800rpm
- fix plane...
Sanding machines, New
Drilling-inserting machine for GRASS hinges model BBM-R:
upper group with spindle heads of various distances
complete with aluminum side...
Boring machines, Second hand
PRIMULTINI pair of heavy stands for sawmill blade sharpener
Grinding machines, Second hand
Log bandsaw PRIMULTINI SE110DX + CEA + AUTOMATIONS
Already disassembled and ready for delivery.
Loading automation:
– 3-...
Log band saws, Second hand
Chain mortiser Omp Catena Second hand
Chain mortiser, Second hand
Moulder WEINIG model UNIMAT 17A with 8 spindles:
-useful working sizes 170x120mm
-cardan drive and pneumatic pressure
-variable feeding...
Moulders, Second hand
SCM horizontal panel saw model SIGMA 90
General characteristics:
- useful cutting length 4500mm
- useful cutting depth 4300mm
- blade...
Beam saws, Second hand
Moulder WEINIG model UNIMAT 17N with 8 spindles:
-useful working sizes 170x120mm
-cardan drive and pneumatic pressure
-variable feeding...
Moulders, Second hand
Manual edgebander FRAVOL model A16/AC for pre-glued edges
Machine not compliant with CE standards
Edgebanders, Second hand
Foratrice multipla SCM modello TOP35E PLUS:
- foratura dall’ alto, con posizionamento elettro-pneumatico della testa a forare, inclinabile a tutti...
Boring machines, Second hand
Centro di lavoro MORBIDELLI modello AUTHOR 600KXL:
- area di lavoro utile in X = 4400mm
- area di lavoro utile in Y = 1385mm fresatura
-...
Machining centers, Second hand
Centro di lavoro BUSELLATO modello JET MASTER 5WF XL a 5 assi:
- corsa utile assi 5500 x 1900 mm
- campo utile di lavoro 4650 x 1555 mm
-...
Machining centers, Second hand
Sega a nastro CENTAURO SP700
Macchina a norme CE
Band saws, Second hand
Bordatrice SCM modello BASIC 1 :
– spessore utile del pannello da 8 a 40 mm
– velocità di avanzamento 8 mt/min
– ingombro circa 1,7 x 0,7 x...
Edgebanders, Second hand
Troncatrice doppia OMGA modello TR2B N NC:
- 1 testa fissa + 1 testa con apertura motorizzata
- controllo elettronico ESA TRIA 250
-...
Crosscut saws, Second hand
Pressa a caldo ORMA modello 25/13 AS-NPA:
- piani assemblati da 2500x1300mm
- 1 vano con apertura maggiorata 650mm
- 6 pistoni idraulici D=...
Presses, Second hand
Pialla a spessore BOLLA 600mm
Macchina non a norme CE, per export
Disponibile da gennaio 2026
Thicknessing planers, Second hand
Sega a pendolo STROMAB modello PS45/F con:
- diametro lama 450mm
- altezza utile di taglio 130mm
- larghezza utile di taglio 530mm
-...
Crosscut saws, Second hand
Multilame a 2 lame mobili CML modello SCA320 2R T350 ,
con linea di separazione e ritorno pezzi all’ operatore:
– gestione macchina da quadro...
Multi rip saws, Second hand
Sega a nastro CENTAURO SP600
Anno 1994 , non a normative CE, per export
DISPONIBILE DA GENNAIO 2026
Band saws, Second hand
Troncatrice a fermo mobile CURSAL TRV500 a norme CE,
direzione di lavoro da destra a sinistra, composta da:
– rulliera RALM 4000 x 450
–...
Crosscut saws, Second hand
Troncatrice inferiore rapida con lama diametro 500mm
Macchina non a norme CE, per export
Crosscut saws, Second hand
Bordatrice manuale per sagomati IDM modello KOMPACT a norme CE
Edgebanders, Second hand
Calibratrice VIET modello CHALLENGE 211B da 1100mm con 2 nastri:
– 1° nastro a rullo calibratore
– 2° nastro a rullo levigatore
– on/off...
Wide belt sanders, Second hand
Levigatrice a nastro SAMCO modello LS3000:
- piano di lavoro da mt 3 x 0,8
- motore nastro a 2 velocità
- motore sollevamento piano
-...
Stroke Sanders, Second hand
Toupie SCM modello T110A:
- albero D=35mm, con sollevamento manuale
- motore kw 4 / hp 5,5 , volt 380
- con inversione di rotazione albero...
Spindle moulding machines, Second hand
Troncatrice elettronica a doppia testa AUDATECH (GEMMA GROUP) modello DH550:
- per taglio profili in PVC, alluminio, legno-alluminio
- tutta a...
Crosscut saws, Second hand
Segatrice a catena LANDONI modello AGE-2:
- per intestatura di pacchi tavolame o di tronchi
- azionamento manuale a leva
- lunghezza catena...
Log band saws, Second hand
Levigatrice satinatrice COSTA LEVIGATRICI modello S A2 TS 1350 :
– con controllo elettronico PCM e video touch-screen
– larghezza utile di...
Wide belt sanders, Second hand
Strettoio idraulico a barra unica TIGER modello AU:
- misure di lavoro 3000x1700mm
- con manometro regolatore di pressione
- ciclo manuale,...
Clamping machines, Second hand
Toupie RM GROUP modello SM120:
– albero D=35mm, con sollevamento manuale
– motore kw 4 / hp 5,5 , volt 380
– 4 velocità di rotazione albero...
Spindle moulding machines, Second hand
Bordatrice IDM modello ACTIVA GP-R2:
– controllo elettronico MAGELIS con video
– spessore utile del pannello da 10 a 60 mm
– spessore bordi...
Edgebanders, Second hand
Affilatrice PRIMULTINI per lame di sega a nastro, completa di cavalletti.
Macchina non a norme CE, per export
Grinding machines, Second hand
Affilatrice RB per lame di sega a nastro, completa di cavalletti e di quadro elettrico supplementare.
Macchina non a norme CE, per export
Grinding machines, Second hand
