Woodworking machinery - by user KAZITANI - pag 2

  • Edgebander HOMAG OPTIMAT KDN 210
    HOMAG OPTIMAT KDN 210
    Edgebander OPTIMAT KDN 210 Ref: C2734 Technical characteristics End cut unit Minimum panel thickness: 8 mm Maximum panel thickness:...
    Edgebanders, Second hand
    KAZITANI's picture
  • Double moulding edgebanding BIESSE STREAM SB2 10.5
    BIESSE STREAM SB2 10.5
    Double moulding edgebanding BIESSE STREAM SB2 10.5 BIESSE Ref: C3086 Technical characteristics Panel width : 240 mm to 1200 mm Panel length...
    Edgebanders, Second hand
    KAZITANI's picture
  • Vacuum and filtration system NESTRO - C2984 VMK63
    NESTRO VMK63
    Vacuum and filtration system NESTRO - C2984 VMK63 Fan 11 kW Flow rate 8000 m3/h 4000 PA 6 waterproof dust trays Complete module Low height...
    Aspiration systems, Second hand
    KAZITANI's picture
  • central vacuum used CATTINAIR - floor filter unclogging Ø to 2m
    CATTINAIR 23000 m3/h
    central vacuum used CATTINAIR - floor filter unclogging Ø to 2m - fan 45 kilowatts (23,000 m3 / h) Ref: B1164
    10000.00 €
    Aspiration systems, Second hand
    KAZITANI's picture
  • Vacuum 1 bag EUROPEEN HARRY Ref: B1695
    HARRY EUROPEEN
    Vacuum 1 bag EUROPEEN HARRY Ref: B1695 Sweeping mouth Debit / Rate of air flow: 2800 m3/h Motor: 3 CV
    Aspiration systems, Second hand
    KAZITANI's picture
  • Decompression cyclone Ref: C2193
    - -
    Decompression cyclone Ref: C2193 Galvanised Mounted on chair support Inlet diameter 480mm 4 support feet Silo diameter: 2000 mm Height: 4500...
    Aspiration systems, Second hand
    KAZITANI's picture
  • Ensemble filtration aspiration Hocker Ref: C2740
    Hocker -
    Ensemble filtration aspiration Hocker Ref: C2740 Power: 30 Kw Length: 2000 mm Width: 2000 mm Height: 6000 mm Weight: 900 Kg
    Aspiration systems, Second hand
    KAZITANI's picture
  • Ensemble aspiration filtration Cattinair Ref: C2798
    Cattinair -
    Ensemble aspiration filtration Cattinair Ref: C2798 cyclofilter 3 x 2 37 bags flow rate about 10000 m3/h 50m² filtering surface 2 vents...
    Aspiration systems, Second hand
    KAZITANI's picture
  • Bagger 6 bags Brand new ML3006
    Samsoud ML3006
    Bagger 6 bags Brand Samsoud new ML3006 Ref: C2849 New bagger, still in its original state. Protection covering Motor SPC32 Ø 325 mm Diagram...
    Aspiration systems, New
    KAZITANI's picture
  • Vacuum filtration Samsoud Ref: C2906
    Samsoud -
    Vacuum filtration Samsoud Ref: C2906 Recovery in watertight tank (x2) Ø 500 128 cotton filter bags, 76m² of filtering surface Max flow rate...
    Aspiration systems, Second hand
    KAZITANI's picture
  • Hot air generator Fabbri F85 Ref: C2923
    Fabbri F85
    Hot air generator Fabbri F85 Ref: C2923 For workshop with : usable area 350 - 300 sqm useful volume 1500 m3 Horizontal furnace in reinforced...
    Vacuum timber drying, Second hand
    KAZITANI's picture
  • Fan SACME TPR20 Ref: C2927
    SACME TPR20
    Fan SACME TPR20 Ref: C2927 Power 15 kW (20 hp) 3000 rpm Input Ø 400 mm Output 500 x 320 mm Transmission by belt Dimensions : 1550 x 900 x...
    Aspiration systems, Second hand
    KAZITANI's picture
  • Vacuum and filtration system Ref: C2972
    Samsoud Applications -
    Vacuum and filtration system Ref: C2972 - Second Hand Fan 20 kW 15000 m3/h Ø 450 mm Filter AF 84 : Filtration capacity 15000 m3/h Filtering...
    Aspiration systems, Second hand
    KAZITANI's picture
  • Double filtration vacuum R160 TE
    Holz Profl R160 TE
    Double filtration vacuum R160 TE Ref: C2981 Mobile chip vacuum with double filtration Remote start with remote control 230 L tank Nominal...
    Aspiration systems, Second hand
    KAZITANI's picture
  • Double grader tenoner Parveau 1540 Ref: C2201
    Parveau 1540
    Double grader tenoner Parveau 1540 Ref: C2201 Second Hand Type of tenoning: Double Digitized command left moving head opening 3000 mm maxi -...
    Tenoning machines, Second hand
    KAZITANI's picture
  • Tenoner for carpentry Parveau 900 Ref: C2352
    Parveau 900
    Tenoner for carpentry Parveau 900 Ref: C2352 capacity 200 mm 150 mm diameter top / bottom unwinders with independent and simultaneous adjustment...
    Tenoning machines, Second hand
    KAZITANI's picture
  • Tenoner Parveau 900 Ref: C2669
    Parveau 900
    Tenoner Parveau 900 Second Hand Ref: C2669 Type of tenoning: Simple special finger joint / end-grain assembly router saw brake motor 4 kW,...
    Tenoning machines, Second hand
    KAZITANI's picture
  • Tenoner Parveau SERIE 900 Second Hand
    Parveau SERIE 900
    Tenoner Parveau SERIE 900 Second Hand - Ref: C2792 motorized trolley advance blade group Ø 380 mm maxi motorized adjustment - digital...
    Tenoning machines, Second hand
    KAZITANI's picture
  • Tenonneuse double Celaschi TSA 3606
    Celaschi TSA 3606
    Tenonneuse double Celaschi TSA 3606 - Second Hand Ref: C2800 Power: 63 Kw
    Tenoning machines, Second hand
    KAZITANI's picture
  • HOMAG double tenoner and sorting line (quality control)
    HOMAG -
    HOMAG double tenoner and sorting line (quality control) Second Hand Ref: C2893.4 FL20/16/30/II/S 400V 3Ph+n 200A Width 300mm 2x1 straightening...
    Tenoning machines, Second hand
    KAZITANI's picture
  • Tenoner Chambon TDN04 Second hand
    Chambon TDN04
    Tenoner Chambon TDN04 Second hand Ref: C2897 Saw Ø 400 mm Stroke 150 mm Cutting height 150 mm 3 kW 2 unwinders Ø 140 mm Voltage: 400 V...
    Tenoning machines, Second hand
    KAZITANI's picture
  • Tenoner SERIE D SONVER SIMPLE Parveau
    Parveau SERIE D SONVER SIMPLE
    Tenoner SERIE D SONVER SIMPLE Parveau - Second hand Ref: C2919 Saw blade Ø 350 mm Recoil 230 mm Spindle moulder 50 mm length 170 mm Max Ø 320...
    Tenoning machines, Second hand
    KAZITANI's picture
  • Tenoner with unwinder Mecanobois COMPACT 90
    Mecanobois COMPACT 90
    Tenoner with unwinder Mecanobois COMPACT 90 Second Hand - Ref: C2946 Saw blade Ø 400 mm Lg 150 mm 3 HP motors Independent or simultaneous...
    Tenoning machines, Second hand
    KAZITANI's picture
  • Double tenoning calibration line Celaschi TSA 400 C
    Celaschi TSA 400 C
    Double tenoning calibration line Celaschi TSA 400 C Ref: C2999 Covered machine Passage height : 150 mm Width of passage: 250 mm to 3200 mm ⌀...
    Tenoning machines, Second hand
    KAZITANI's picture
  • Planer SCM S50 - C2937 - Second hand
    SCM S50
    Planer SCM S50 - C2937 - Second hand Cast iron frame Useful width 520 mm Useful height 230 mm Mechanical raising/lowering Manual focus 2 feed...
    Thicknessing planers, Second hand
    KAZITANI's picture
  • Raboteuse lourde GUILLIET LKS - C2969
    GUILLIET LKS
    Raboteuse lourde GUILLIET LKS - C2969 Second hand
    Thicknessing planers, Second hand
    KAZITANI's picture
  • Router Guilliet QFB Second Hand
    Guilliet QFB
    Router Guilliet QFB Second Hand Ref: C2711 aluminum guide manual rise / fall Shaft diameter: 50 mm Number of speeds: 4
    Spindle moulding machines, Second hand
    KAZITANI's picture
  • Spinning top Chambon T319 Second Hand
    Chambon T319
    Spinning top Chambon T319 Second Hand Ref: C2806 Ø shaft 50 mm Aluminium guide Table 1200 mm Manual raising/lowering Second hand drive Motor: 5....
    Surface planer, Second hand
    KAZITANI's picture
  • Router Utis TS50 Second Hand - Ref: C2898
    Utis TS50
    Router TS50 Second Hand - Ref: C2898 Shaft bore 50 mm, length 170 mm Manual height and fence adjustment Motor 2 speeds and 2 belt positions 3000...
    Spindle moulding machines, Second hand
    KAZITANI's picture
  • Router Guilliet Second hand Ref: C2942
    Guilliet -
    Router Guilliet Second hand Ref: C2942 With HAFFNER 3-roller drive with variator Shaft 50 mm, length 170 mm Manual raising/lowering Max Ø 250...
    Surface planer, Second hand
    KAZITANI's picture
  • Toupie Lurem T50N Second Hand
    Lurem T50N
    Toupie Lurem T50N Second Hand Ref: C2957
    Surface planer, Second hand
    KAZITANI's picture
  • Long table router Second Hand
    - -
    Long table router Second Hand Ref: C2966 Table 2500 mm with front extension Shaft 50 mm long 170 mm Ø max 200 mm Height control panel...
    Surface planer, Second hand
    KAZITANI's picture
  • Router Guilliet QFD Second Hand
    Guilliet QFD
    Router Guilliet QFD Second Hand Ref: C2967 Shaft 50 mm Long 180 mm 4 speeds 3000/4500/6000/9000 rpm Manual raising/lowering Adjustable guide...
    Profiling machines, Second hand
    KAZITANI's picture
  • Router Guilliet Ref: C2968 Second Hand
    Guilliet Guilliet
    Router Guilliet Ref: C2968 Second Hand Shaft 50 mm Long 170 mm 4 speeds 3000/4500/6000/9000 rpm Aluminium lip Adjustable guide Engine 5.5 hp...
    Profiling machines, Second hand
    KAZITANI's picture
  • Router QFB GUILLIET SPANEX variable speed trainer
    GUILLIET QFB
    Router QFB GUILLIET Ref: B1790 SPANEX variable speed trainer Shaft diameter: 50 mm Number of speeds: 4 Table width: 700 mm Table length...
    Spindle moulding machines, Second hand
    KAZITANI's picture
  • Heavy router UTIS T505 - C2941
    UTIS T505
    Heavy router UTIS T505 - C2941 UTIS Ref: C2941 With new 3-roller 4-speed drive Electric control for spindle and guide adjustment and speed...
    Spindle moulding machines, Second hand
    KAZITANI's picture
  • UTIS Heavy long table router with reading roller system
    UTIS C2992
    Heavy long table router with reading roller system Ref: C2992
    Spindle moulding machines, Second hand
    KAZITANI's picture
  • Long table router UTIS TS50 - C2899
    UTIS TS50
    Long table router UTIS TS50 - C2899 UTIS Ref: C2899 (*) Control panel Digital adjustment of spindle, fence and speed Spindle height and...
    Spindle moulding machines, Second hand
    KAZITANI's picture
  • Spin-piece cast iron UTIS TS 50 E Second hand
    UTIS TS 50 E
    A477 Spin-piece cast iron UTIS TS 50 E Second hand - Table 1200 x 800 mm - swing micrometer Guide - Engine 5.5 HP two-speed from 3000 to 4500...
    Spindle moulding machines, Second hand
    KAZITANI's picture
  • Heavy router MARTIN T20 - C2908
    MARTIN T20
    Heavy router MARTIN T20 - C2908 MARTIN Ref: C2908 Long table with front extension Interchangeable shaft Ø 50 mm 2 speed motor 7.5 HP Rotation...
    Spindle moulding machines, Second hand
    KAZITANI's picture
  • Spindle moulding machines  MARTIN T20 - C2996
    MARTIN T20
    Spindle moulding machines  MARTIN T20 - C2996 MARTIN Ref: C2996
    Spindle moulding machines, Second hand
    KAZITANI's picture
  • Automatic double chainsaw Essepigi T3000 RAPID B
    Essepigi T3000 RAPID B
    Automatic double chainsaw T3000 RAPID B Ref: C2670 Type of sawing: Cutting Air cussion table radial cut blocking of the part by...
    Crosscut saws, Second hand
    KAZITANI's picture
  • Double saw  OMGA TR2-A second hand
    OMGA TR2-A
    Double saw  OMGA TR2-A OMGA Ref: C2671   Type of sawing: Cutting pneumatic fixing system simultaneous descent of the blades...
    Crosscut saws, Second hand
    KAZITANI's picture
  • Multi rip saw Mitek Vkp4 Second hand
    MITEK VKP4
    Multi rip saw Mitek Vkp4 Second hand MITEK Ref: C2725
    Multi rip saws, Second hand
    KAZITANI's picture
  • Massive wood edger  ACMA DM - C2794
    ACMA DM DM
    Massive wood edger  ACMA DM - C2794 ACMA Ref: C2794 hydraulic advance of the cutting unit pedal control parallel guide 550 mm SIKO...
    Rip saw machines, Second hand
    KAZITANI's picture
  • Length saw JRION HLS170 HLS 170
    JRION HLS170 HLS 170
    Length saw JRION HLS170 HLS 170 Edger JRION HLS170 - C2819 JRION Parallel guide 500 mm Mobile blade carriage 80 m/min max Upper presser...
    Rip saw machines, Second hand
    KAZITANI's picture
  • Panel saw STRIEBIG COMPACT 07 - C3007
    STRIEBIG COMPACT 07
    Panel saw STRIEBIG COMPACT 07 - C3007 STRIEBIG Ref: C3007 Useful dimensions: 4060 mm long, horizontal (top) 1970 mm , vertical (top) 2070 mm...
    Vertical panel saws, Second hand
    KAZITANI's picture
  • Multiblade edger MEM COBRA - C2982
    COBRA MEM MEM
    Multiblade edger MEM COBRA - C2982 Ref: C2982 2 motors of 132kw Entry width 750mm Maximum dimension between two blades: 600mm Useful...
    Multi rip saws, Second hand
    KAZITANI's picture
  • Automatic saw Cursal TRV 1700
    Cursal TRV 1700
    Automatic saw Cursal TRV 1700 Ref: C2890 42000 € HT. Numerical control pusher with defect reader and cutting optimization The defect is...
    Crosscut saws, Second hand
    KAZITANI's picture
  • Automatic saw STROMAB TR450 MATRIX PLUS -  C2896
    STROMAB TR450 MATRIX PLUS
    Automatic saw STROMAB TR450 MATRIX PLUS -  C2896 STROMAB Ref: C2896 blade Ø 450 mm, 4 kW Capacity 25 x 330 mm, 50 x 300 mm, 100 x 250 mm...
    Crosscut saws, Second hand
    KAZITANI's picture
  • Automatic crosscut saw Mitek EASY CUT 828
    Mitek EASY CUT 828
    Automatic crosscut saw EASY CUT 828 Ref: C2904 Blade Ø 800 mm Motor 10 HP Motorized feed of the cutting plane 400 mm Rotation vertical...
    Crosscut saws, Second hand
    KAZITANI's picture
  • Band saw CENTAURO CO 700 second hand
    CENTAURO CO 700
    Band saw CENTAURO CO 700 Ref: C2782 handwheel Ø 700 mm cast iron table cutting height 300 mm max blade width 30 mm faired machine
    Band saws, Second hand
    KAZITANI's picture
  • Band saw GUILLIET 700 MND - C2922
    GUILLIET 700 MND
    Band saw GUILLIET 700 MND - C2922 Ref: C2922 Cast iron table 1100 x 1000 mm fixed Motor 3 kW Pedal brake Solid flywheel Blade width 30 mm...
    Band saws, Second hand
    KAZITANI's picture
  • Band saw GUILLIET Wheel 700 mm
    GUILLIET 700 mm
    Band saw GUILLIET Ref: C2939 Wheel 700 mm Cast iron table 900 x 800 fixed Blade width max 40 mm Cast iron rip fence Fairing Roller...
    Band saws, Second hand
    KAZITANI's picture

Pages