Immediately available - SCM NOVA F 520
Tops in ribbed cast iron with movement on connecting rods
Useful planer width 520mm
Total length of...
Surface planer, New, Italy
Generators used but just overhauled by the manufacturer
Hot air generators, Second hand, Italy
Biesse Akron 850 Monolateral Edgebander
Edging panels from 10 to 60 mm thick
- Anti-noise cabin with internal lighting
- Track with feed...
Edgebanders, Second hand, Italy
Immediately available - SCM NOVA SI X
Double inclination squaring machine ± 46 °
3200 wagon
Motorized and programmable movement of the blade...
Sliding table saws, New, Italy
Immediately available - SCM NOVA SI 40 with electronic control
Electronic control of blade inclination and protrusion and of the aluminum guide...
Sliding table saws, New, Italy
SCM - Minimax Formula T2
Spindle moulder with shaft tiltable up to 45 °
5-speed motor from 3,500 to 10,000 rpm
Shaft D.35 mm
Inlet /...
Spindle moulding machines, Second hand, Italy
Cold press for bends Baioni Presse BP 100
2600x1000 mm
Top opening from 1100 to 400 mm
6 pistons D.80 - excursion 700 mm
Machine working...
Presses, Second hand, Italy
Hot press SIMI 2500 x 1300
6-piston hydraulics
Machine with protections in accordance with Italy, no CE
Presses, Second hand, Italy
Professional multifunction machine - Available in stock
Useful for cutting with 90 ° blade up to 80 mm - Tilting blade up to 45 °
"Blade edge"...
Combination machines, New, Italy
SCM K201 HF edgebander
- Glue tank
- Cutter
- Header
- Trimming unit
Single-phase machine, according to CE standards, in good condition
Edgebanders, Second hand, Italy
SCM K203 F edgebander
- Glue tank
- 3mm cutter
- Double End Trimmer
- Trimming unit (roughing)
- Trimming unit (finishing or rounded...
Edgebanders, Second hand, Italy
Fabbri Nuovi hot air generators
Machines available subject to prior sale
Hot air generators, New, Italy
ISVE - Imp-VP - Impregnation plant for timber
For the vacuum and pressure treatment of wood packed in bundles.
Autoclave diameter 1.600mm...
Impregnation machines, Second hand, Italy
Working machine in excellent condition
CE compliant
Cutting section 4500x2200 mm
Blade protrusion 120
Motor power 20 + 20 Hp
Beam saws, Second hand, Italy
Agazzani 800 band saw.
Machine functioning according to CE standards, in excellent condition.
Self-braking motors.
Band saws, Second hand, Italy
4.500 x 3.200 mm horizontal panel saw
N ° 6 grippers, 2 movable plates, 1 fixed surface
CE compliant machine, working in good condition
Beam saws, Second hand, Italy
Thicknessing planer Scm S520 Second hand
Maximum planing dimensions: width 520 mm - height 250 mm
Electric lift with height viewer...
Thicknessing planers, Second hand, Italy
Chisel mortiser Framar Mbo-t1
CE-machine, running in Excellent condition
Chisel mortiser, Second hand, Italy
New SCM ECO 300 vacuum cleaners
Available in stock in the following models:
ECO 300 S - single single-phase bag
ECO 300 SK - single three-...
Dust collectors, New, Italy
1 vise
with drawer and shelf
size: 214x68 + 12morsax85h
Joiners workbench, Second hand, Italy
planer width mm 220, n. 4 shafts, 2300 mm entry plane
machine not in "CE" regulations
Four sided planers, Second hand, Italy
Ce machine
In excellent condition
Boring machines, Second hand, Italy
2500 mm wagon
3 electric vices
There is not
Working
Log band saws, Second hand, Italy
double oscillating mortising machine second hand
not CE
Mortising machines, Second hand, Italy
N.1 tenoning spindle mm 620
N.2 profiling spindles 620 mm
hardware grooving unitbars recovery
strip recovery unit
Window and door machinery, Second hand, Italy
4-knife shaft
With hole puncher
working machine
Not CE
Surface planer, Second hand, Italy
veneer cutter, hydraulic, manual pusher and photocells
working machine
not to "CE" regulations
Veneer guillotines, Second hand, Italy
press with 2 separate shelves each of 1500 x 1000 mm
machine not "CE"
Presses, Second hand, Italy
machine CE regulation
cutting size 4500x4300
3 1500s air curtain plans
nr. 7 pliers
change of blades and pneumatic engraver
Beam saws, Second hand, Italy
with double vice
floor with closure
in the state in which it is located
size: 224x73 + 15morsax85h
Joiners workbench, Second hand, Italy
machine in excellent condition, according to CE regulations
Brushing machines, Second hand, Italy
Edgebander for bends Polymac Single 89n Second hand
machine to CE standards
Edgebanders, Second hand, Italy
- pneumatic pressure on the feed rollers
- 4 trees
- max width 180, height 120
- entry length 2500 mm
- not to "CE" regulations...
Moulders, Second hand, Italy
Useful length max 1200
2 roughing tools
3 finishing groups
Not CE
used
working
Woodturning lathes, Second hand, Italy
Veneer splicing machine KUPER FW 900 second hand
Veneer splicing machines, Second hand, Italy
Subito disponibile - MINIMAX FS 41 E - pialla filo/spessore
Supporti e piano in ghisa
Lunghezza totale piano in ghisa 2000 mm
Larghezza...
Thicknessing planers, New, Italy
Basi aspiranti revisionate in ottime condizioni.
Dust collectors, Second hand, Italy
