Woodworking machinery - by user Danjtec service srl

  • Friulmac Floormat
    Squaring machine Friulmac Floormat to Parquet production - Lenght              ...
    Sliding table saws, Second hand, Italy
    DANJTEC service srl's picture
  • Colombo AM 33
    Window machine center Colombo AM 33 - Electronic Guide  - Blade Unit - 620 mm Tenoning Shaft  - 320 mm Profiling Shaft...
    Window and door machinery, Second hand, Italy
    DANJTEC service srl's picture
  • Biesse Techno 2000
    Boring machine Used Biesse Techno 2000 electronic machine with numerical control NC 400 plus color. heads with electronic device for quick...
    Boring machines, Second hand, Italy
    DANJTEC service srl's picture
  • Weeke BST 100
    Boring machine Weeke BST 100   - Bargstedt loader   - Drilling machine with independent spindles with 4 lower vertical groups...
    Boring machines, Second hand, Italy
    DANJTEC service srl's picture
  • Comil Insider KB2
    Drilling machine Biesse Comil Insider KB2 hinge cabinet insert Drilling station /Hinges insertion for doors and fronts with work from below....
    Boring and inserting machines, Second hand, Italy
    DANJTEC service srl's picture
  • Italmeccanica Macpower
    Brushing Machine for Frame Italmeccanica - Widht working dimention mm 1400 - Vertical units for both panel side - Horizontal Roller Brush -...
    Brushing machines, Second hand, Italy
    DANJTEC service srl's picture
  • Sorbini VS 31 AC
    Brushing-Cleaning machine Sorbini VS 31 AC - Workable Widht  1350 mm - Upper Brushing unit - Upper Blowing unit - Bottom Brushing unit
    Brushing machines, Second hand, Italy
    DANJTEC service srl's picture
  • Viet Challenge 331
    Calibrating sanding line VIET Challenge 331 -Workable width 1100 mm -Belts Dimension   2620 mm -Bottom Unit Calibrating roller...
    Wide belt sanders, Second hand, Italy
    DANJTEC service srl's picture
  • Costa KHV CCCC 1350
    Calibrating Sander machine Used Costa KHV CCCC 1350 - Group 1: Cylinder diameter 250 mm in steel, pneumatic grit-set with 4-position revolver,...
    Wide belt sanders, Second hand, Italy
    DANJTEC service srl's picture
  • Costa HKV CC 1350
    Calibrating Sander Machine Costa HKV CC 1350 - UNIT 1: Cylinder diam 250 mm in rubber sh 60, pneumatic grit-set with 4-position revolver, stand-by...
    Wide belt sanders, Second hand, Italy
    DANJTEC service srl's picture
  • Biesse Skipper 100 L
    Drilling center Used Biesse Skipper 100 Workpieces dimensions: Length: mm 90 - 3000 / Width: mm 70 - 1000 Thickness: mm 8-60 2 Grippers to keep...
    Machining centers, Second hand, Italy
    DANJTEC service srl's picture
  • Biesse Rover 24 ATS
    CNC Router Biesse Rover 24 ATS 4 Axis - Working area 3000 x 1350 mm. - Working thickness H 160 mm. - 12 hp electro-spindle HSK F 63 with C Axe...
    Machining centers, Second hand, Italy
    DANJTEC service srl's picture
  • Biesse Rover 30 L 2
    CNC Router Biesse Rover 30 L2 4 axis - Working area         4500 mm x 1600 mm - Workable thickness  200 mm...
    Machining centers, Second hand, Italy
    DANJTEC service srl's picture
  • SCM Pratix 2231
    Nesting CNC Router SCM Pratix 2231 - Working Area 3086 x 2150 - Workable thichness Z 150 - Remote Control touch Screen a 7 " “Tec-Pad” -...
    Machining centers, Second hand, Italy
    DANJTEC service srl's picture
  • Giben SPT Y 3000
    - Working dimentions 4.500 x 4500 mm  - Overhauled Blade 100 mm - Panel loading direct on lift table  - Panel rotating system...
    Beam saws, Second hand, Italy
    DANJTEC service srl's picture
  • Biesse Rover 30 S2
    CNC Router BIESSE ROVER 30 S2 4 Axis - Working dimentions 3432 x 1600 mm - Workable panel thickness H 200 mm - N ° 1 Electrospindle 10 hp...
    Machining centers, Second hand, Italy
    DANJTEC service srl's picture
  • Biesse Arrow Ats 4
    CNC Router Biesse Arrow 4 AXIS -Working Dimentions 3200 x 1600 mm - Axis stroke X 4300  Y1600  W 1600  z 300 mm - 2 Working...
    Machining centers, Second hand, Italy
    DANJTEC service srl's picture
  • IMA KLESSMANN HKA
    Edgebander IMA KLESSMANN HKA 2001 Second hand
    Edgebanders, Second hand, Italy
    DANJTEC service srl's picture
  • Brandt Optimat Kdn 330
    Edgebander Brandt Optimat KDN 330 - Workable panel thickness  40 mm  -Edge thickness in coils (min/max) mm 0,4 - 3 m - Top pressure...
    Edgebanders, Second hand, Italy
    DANJTEC service srl's picture
  • Fravol Smart S 1
    Edgebander Fravol Smart S1 -Workable panel thickness :10 to 55 mm -Edge thickness in coils (min/max) mm 0,4 - 3 mm -Edge thickness in strips (...
    Edgebanders, Second hand, Italy
    DANJTEC service srl's picture
  • Brandt KD 79B F
    Edgebander Brandt KD 79B F - Workable panel thickness 10 to 55 mm - Edge thickness in coils max 3 mm - Edge thickness in strips max 15 mm -...
    Edgebanders, Second hand, Italy
    DANJTEC service srl's picture
  • Idm Level KS
    Edgebander Idm Level KS - Belt to return panels to the operator - Max. working panel height  with straight edge 10 - 60 mm  -...
    Edgebanders, Second hand, Italy
    DANJTEC service srl's picture
  • Stefani Monomatic
    Squaring Edgebander Stefani Monomatic SOFT-FORMING Line composed by - Automatic longitudinal loader with 2 loading stations - Panel turner...
    Squaring-edgebanding machines, Second hand, Italy
    DANJTEC service srl's picture
  • Idm Activa R-74
    Idm Activa R-74 Edge banding machine - Workable panel thickness 10 - 60 mm - Edge thickness in rolls max 3 mm - Edge stipes thickness  20...
    Edgebanders, Second hand, Italy
    DANJTEC service srl's picture
  • Homag KAL
    Edgebander Homag KAL - Workable panel thickness 10-60 mm - Edge thickness in coils  max 3 mm - Feedrate max 24 mt/min - P re-milling unit...
    Edgebanders, Second hand, Italy
    DANJTEC service srl's picture
  • Biesse Akron 850
    Edgebander Biesse Akron 850 - Workable panel thickness 10 to 60 mm - Edge thickness in coils max 3 mm - Edge thickness in strips max 15 mm -...
    Edgebanders, Second hand, Italy
    DANJTEC service srl's picture
  • Idm Activa 1-68 
    Edgebander IDM Activa 1-68 Max. working panel thickness 10 - 60 mm  Applicable banding material in coils: 3 mm  Applicable banding...
    Edgebanders, Second hand, Italy
    DANJTEC service srl's picture
  • Holzer Triathlon 1488
    Edgebander Holzer Triathlon 1488 -Workable panel thickness: 10 to 60 mm -Edge thickness in coils (min/max) mm 0,4 - 3 mm -Edge thickness in...
    Edgebanders, Second hand, Italy
    DANJTEC service srl's picture
  • Brandt Optimat Kd 87 C
    -Workable panel thickness 10 to 50 mm -Edge thickness in coils max 3 mm -Edge thickness in strips max 15 mm -Running driving chain speed  14...
    Edgebanders, Second hand, Italy
    DANJTEC service srl's picture
  • Scm Startech
    Vertical and horizontal drilling machine Scm Startech cn
    Boring machines, Second hand, Italy
    DANJTEC service srl's picture
  • Brandt Optimat KD 67
    - Workable panel thickness 10 to 50 mm - Edge thickness in coils max 3 mm - Edge thickness in strips max 15 mm - Running driving chain speed...
    Edgebanders, Second hand, Italy
    DANJTEC service srl's picture
  • Stefani Major
    Used squaring and edgebanding machine Stefani Major Marhos loader double year 2003 Double loading station Useful dimensions max. 3000x1200 mm...
    Squaring-edgebanding machines, Second hand, Italy
    DANJTEC service srl's picture
  • Homag KL QA S2
    Edge banding machine used Homag KL QA S2 - EZ 10/70 support and introduction system - Partial automation for EZ 10/70 - Automatic chain...
    Edgebanders, Second hand, Italy
    DANJTEC service srl's picture
  • Selco wnt 600
    - Useful working cutting 4400 x 2200 mm - Maximum blade projection 122 mm - Lifting table  4400 x 2200 mm - 10 grippers to clamp the...
    Beam saws, Second hand, Italy
    DANJTEC service srl's picture
  • Morbidelli Author 430S
    - Working range 3050 mm x 1360 mm - 180 mm panel passage - trimming unit - Tool storage - Group boring head - N. 8 worktops with 3...
    Machining centers, Second hand, Italy
    DANJTEC service srl's picture
  • Cefla Easy2000 D
    Patented CFB continuous belt conveyor system, motorized with inverter. Paint recovery unit with 1 counter-rotating roller with doctor blade, and...
    Wood finishing equipment, Second hand, Italy
    DANJTEC service srl's picture
  • Biesse Rover B FT 2231
    Working center Used with numerical control Biesse Rover B FT 2231 Table Dimensions FT: X = 3100mm; Y = 2205mm - Centralized manual lubrication...
    Machining centers, Second hand, Italy
    DANJTEC service srl's picture
  • Amu -
    Line extrusion edges to abs and polypropylene Amu.
    Edgebanders, Second hand, Italy
    DANJTEC service srl's picture
  • Biesse Rover 20
    - Working area    mm   2980 x 950 - Workable thickness  mm 65 - 7.5 hp electro-spindle ISO 30 - Tool changer...
    Machining centers, Second hand, Italy
    DANJTEC service srl's picture
  • Brema -
    Drilling Line used flexible horizontal Brema Write us for more info!  
    Boring machines, Second hand, Italy
    DANJTEC service srl's picture
  • Viet S3T233TM
    - n.1 Electronic Transversal belt development 7080 mm to 60 sectors with inverter 25 HP - n.1 belt 2620 X 1380 mm with 20 hp inverter - n.1...
    Wide belt sanders, Second hand, Italy
    DANJTEC service srl's picture
  • Biesse Rover 27
    - Work area 3400 mm x 1300 mm x 155 mm - No. 8 floors - N. 3 flat carts - Lifters - Display positioning plans - Electro-spindle 7.5 KW - 30 M...
    Machining centers, Second hand, Italy
    DANJTEC service srl's picture
  • Monguzzi - Fisher Rukle - Kuper -
    Factory second hand woodworking complete for veneer
    Window and door machinery, Second hand, Italy
    DANJTEC service srl's picture
  • Homag Baz 30 30 12 K
    Working range x mm: 5000 Working range y mm: 1250 Working range z mm: 150 N. 4 axis Tool change positions: 30 Glue aggregate: 360 ° Number...
    Machining centers, Second hand, Italy
    DANJTEC service srl's picture
  • Brema -
    Vertical drilling machine Used Brema - Anthropomorphic Robots for loading and unloading FANUC - Bremen Vector vertical work center year 2003 N...
    Boring and inserting machines, Second hand, Italy
    DANJTEC service srl's picture
  • Morbidelli Planet
    Working center Used to edge Morbidelli Planet - N. 2 independent worktops 1900x1830 mm mobile on "Y" axis; - N. 1 edging unit on the front side...
    Machining centers, Second hand, Italy
    DANJTEC service srl's picture
  • Homag Baz 41 30 K
    Working range x mm: 3000 Working range y mm: 1300 Working range z mm: 200 N.1 electrospindle N. 12 Tool change positions 4th axis: C axis N. 17...
    Machining centers, Second hand, Italy
    DANJTEC service srl's picture
  • Biesse Stream SB 2 10.5
    - Panel lenght 3200 mm - Antisplit milling hogging unit - Top and bottom hogging unit - Multiple  magazine for edge coil 2 positions -...
    Squaring-edgebanding machines, Second hand, Italy
    DANJTEC service srl's picture
  • Scm Aries Wa
    - Working area 4400 x 1100 h 30-120 mm - Anuba Inserting Hea - Kit nr. 4 terminals - Additional pneumatic clamp Ld - Milling unit Ld 2,2 Kw...
    Window and door machinery, Second hand, Italy
    DANJTEC service srl's picture
  • Stemas -
    Drilling machine used Stemas - N. 1 electro-spindle - N. 13 spindles to drill below and above  
    Boring machines, Second hand, Italy
    DANJTEC service srl's picture
  • Stemas S 940-10
    --Technical Details -Workable lenght  min-max           mm   250-3500 -Workable widht...
    Machining centers, Second hand, Italy
    DANJTEC service srl's picture
  • El.me C1f
    -Maximum length of solid wood with 90 ° blades 3200 mm -Minimum length with 90 ° blades 160 mm -Minimum length with blades at 45 ° mm 180 -...
    Crosscut saws, Second hand, Italy
    DANJTEC service srl's picture
  • Biesse Uniwin
    -Working area:  X mm: 3300  Y mm: 1400  Z mm: 160  Milling unit 2 Tenoning units Glass frame trimsaw Tool clamping system...
    Machining centers, Second hand, Italy
    DANJTEC service srl's picture
  • Scm Windor 20
    Minimum working length (inside of tenon) 200 mm Maximum working length (based on stop) 2800 mm Max. workpiece width 200 mm Min. workpiece width 40...
    Machining centers, Second hand, Italy
    DANJTEC service srl's picture

Pages