TECHNICAL DATA:
Cutting dimensions mm: 4200 x 2050
Blade diameter mm: 250
Installed power KW: 4.0
Complete with workpiece roller
Vertical panel saws, Second hand
Long table size: 2500 mm
Table width: 800 mm
Shaft: Ø 35 mm
Installed power: 5.5 kW
Expandable table support
EQUIPMENT:
01 3-roller feeder
Spindle moulding machines, Second hand
TECHNICAL DATA:
Installed power: 6 kW
Working length: 1200 mm
Tenon width: max 100 mm
EQUIPMENT:
01 Soundproof chamber
01 Loader
Tenoning machines, Second hand
TECHNICAL DATA:
Working width: max. 1300 mm
Working thickness: max. 80 mm
Installed power: 9 kW
01 low pressure pump
04 painting groups...
Wood finishing equipment, Second hand
TECHNICAL DATA:
Blades on sleeve: max. Ø 320 mm
Installed power: 22 HP
Belt width: 250 mm
02 feed speed
Cutting height: max. 100 mm
Motorized...
Multi rip saws, Second hand
TECHNICAL DATA:
Table dimensions: 700 x 600 mm
Tilting table
Flywheel dimensions: Ø 800 mm
Blade length: max. 5770 mm / min. 5670 mm
Installed...
Band saws, Second hand
Wood shredder Weima Wlh 300 Second hand 2007
Installed power: 18.5 kW
Inlet width: 300 mm
Inlet height: 200 mm
Rotor: Ø 252 mm...
Wood shredders, Second hand
TECHNICAL DATA:
Maximum workable height: 160 mm
Maximum workable width: 230 mm
Input pre-planer length: 2100 mm
Spindle diameter: 40 mm
Number...
Moulders, Second hand
TECHNICAL DATA:
Technical principle: Screw compressor
Flow rate m3/min: 12,90
Working pressure max bar: 8
Main motor power kW: 75...
Compressors, Second hand
Working width: 1350 mm
Abrasive belt width: 1370 mm
Abrasive belt length: 1900 mm
Steel roller: Ø 150 mm
Working thickness: max. 150 mm
Total...
Wide belt sanders, Second hand
Shaft: Ø 35 mm
Shaft inclination: from -10 to 45
Shaft height adjustment
Rotation direction adjustment
Adjustable speed from 3000 to 10000...
Spindle moulding machines, Second hand
TECHNICAL DATA:
02 benches
Total bench dimensions: 3000 x 520 mm
4-knife roller
Roller speed: 5000 rpm
Installed power: 5.5 kW
Electronically...
Surface planer, Second hand
A. 3-roller sanding unit
Roll 1 - 85 shore
Roll 2 - 65 shore
Roll 3 - 55 shore
Max sanding width mm: 1350
Max workable thickness mm: 170...
Wide belt sanders, Second hand
Development of abrasive belts: 1380 x 2620 mm
Max workable height: 160 mm
Roller diameter: 250 mm
03 independent motors total KW 36.0
Electronic...
Wide belt sanders, Second hand
Strap width: 8-12 mm
Strap thickness: 0.3-0.7 mm
Hot plate welding
Workbench size: 1200 x 620 mm
Complete of:
- automatic/manual...
Packing machines, Second hand
Max workable length mm: 2500
Max workable width mm: 350
01 - 02 milling units of 7.5 kW each.
03 - 04 milling/sanding units of 4.0 kW each...
Combination machines, Second hand
Workable dimensions:
Max. width 1300 mm
Installed power: 17 Kw
COMPOSITION:
02 input side brushes - Ø 250 mm
02 horizontal brushes - Ø 400...
Brushing machines, Second hand
Workable dimensions:
Max. width 1300 mm
Brushes: Ø 250 mm with rev counter
COMPOSITION:
02 input side brushes
01 transversal brush assembly...
Brushing machines, Second hand
Composition:
Power Control PC2 control panel
Rectifier group with 02 milling units
Hair dryer group
Preheating group
Roll plate
Shear
Gluing...
Edgebanders, Second hand
TECHNICAL DATA:
Working width mm: 1600
No 2 side brushes
Lengthwise brushing unit
Horizontal brush
Horizontal brush
Brush roller...
Brushing machines, Second hand
TECHNICAL DATA:
01 Vertical profiling group - h 620 mm electronically controlled vert./horiz.
01 Vertical profiling group - h 620 mm...
Profiling machines, Second hand
Hydraulically operated lifting platform
Height adjustable: up to 1,250 mm
Bench dimensions mm: 2500 x 750
Capacity: 1000 kg
Complete with...
Lifting tables, Second hand
TECHNICAL DATA:
Blade diameter mm: 450
Cutting capacity mm: 3000 x 275 (proportional thickness)
Installed power: 6.2 KW
Automatic pusher...
Crosscut saws, Second hand
TECHNICAL DATA:
Composition:
Tenoning area
02 Vertical tenoning groups - h 620 mm electronically controlled vert./horiz.
01 Saw group
01...
Machining centers, Second hand
TECHNICAL DATA:
Loading mouth size mm: 1000 x 720
Installed power KW: 18.5
Voltage: 380 Volts
Hourly production: 300 kg
Screen...
Wood shredders, Second hand
TECHNICAL DATA:
Groups 04:
- 01 fixed positioning
- 03 adjustable/oscillating
Max workable thickness mm: 100
Adjustable sanding speed...
Edge sanding machines, Second hand
TECHNICAL DATA:
Table dimensions mm: 1600 x 500
Number of spindles: 21 + 3 (accessory head)
Distance between each spindle mm: 32
Max...
Boring machines, Second hand
Max gluing height mm: 55 (polyurethane glue)
Min. length workable mm: 250
Group composition:
Trimmers/trimmers
Rounder/edge scraper
Gleaner
Edgebanders, Second hand
Working width mm: 1350
Size of the abrasive belts mm: 2620 x 1300
Configuration:
I. Iron roller diameter 300 mm
II. Rigid rubber roller...
Stroke Sanders, Second hand
Infeed pre-planer mm: 2500
Trees: 5
Shaft configuration:
I shaft INF - KW 5.5
II - III shafts DX-SX - KW 7.5
IV shaft SUP - KW 5.5
V shaft...
Moulders, Second hand
Max blade diameter mm: 400
Motorized blade inclination: 0° - 45°
Undercarriage length mm: 3800
Installed power: 7.5 HP
Engraver diameter...
Sliding table saws, Second hand
TECHNICAL DATA:
Filter substation for wood chips
Air flow: 7,500 m3/h
Number of cotton filter sleeves: 48 - Ø 200 mm height: 2500 mm
Nr....
Dust collectors, Second hand
TECHNICAL DATA:
Working length: max. 2500 mm
Working width: max. 350-900mm
COMPOSITION:
I group:
Right-left cutter (2 x 11 Kw)
II group...
Copy shaper machines, Second hand
Workpiece length mm: 200 - 3000
Workpiece width mm: 20 - 200
Workpiece thickness mm: 30 - 120
Right stop length mm: 1500
HORIZONTAL DRILLING...
Boring and inserting machines, Second hand
01 Hydraulic press ORMA LS/R-45/13
Dimensions: 4500 x 1300mm
08 pistons Ø 70 mm
02 rack pistons
Stroke: 200mm
01 loading roller conveyor 4500...
Presses, Second hand
Input pre-planer: 2000 mm
Working width: 210mm
Working height: max. 120mm
Cardan transmission
Transmission shaft power: 2.2 kW
I. Tree:
Lower...
Moulders, Second hand
Suitable for working headboards and backrests
Number of spindles: 06
RPM: 10,000 rpm variable
Max processing depth: 50 mm
Radius of...
Mortising machines, Second hand
Technical specifications:
Length mm: 19800
Width mm: 1000
Working length mm: 6600x1000
Passage height max mm: 100
Polishing disks: Yes...
Polishing machines, Second hand
TECHNICAL DATA:
Motor driven belt "Italmeccanica" mm: 1000
Working width mm: 1600
No 2 side brushes
Lengthwise brushing unit...
Brushing machines, Second hand
TECHNICAL DATA:
Special machinery system FRIULMAC for the construction of garden sheds,
chalet and wood structures with the BLOCK-HAUS...
Machining centers, Second hand
TECHNICAL DATA:
Opening width mm: 1300
02 motors KW: 1 + 1
02 Brush sanding units
Sanding unit diameter roller mm: 300
Vacuum table...
Brushing machines, Second hand
TECHNICAL DATA:
Working width mm: 330
Planing height mm: 120
Infeed table length mm: 1800
Feedrate m/min: 6-36 (INVERTER)
Rotation speed max...
Moulders, Second hand
TECHNICAL DATA:
Opening width min mm: 15
Opening width max mm: 150
Workpiece length min mm: 15
Workpiece length min mm: 1200 (Sanding...
Edge sanding machines, Second hand
TECHNICAL DATA:
Sanding width mm: 1350
Passage height max mm: 3 - 160
Feedrate max m/min: 2 - 20 - Inverter KW 4
01 Sanding aggregate:...
Wide belt sanders, Second hand
TECHNICAL DATA:
Handling System
Linear Meters: about 135,38
Working width mm: 600 - linear meter 16,5
Working width mm: 650 - linear...
Stacking device, Second hand
Working width mm: 1350
Workable panel thickness mm: 3 - 160
Feed speed m / min: 2 - 20 - Inverter KW 3
01 Sanding roller:
Belt development mm:...
Wide belt sanders, Second hand
TECHNICAL DATA:
Saw blade diameter max mm: 150
Boring depth mm: 30
Main motor power kW: 2,4
Weight Kg: 324
Assembly benches for windows and doors, Second hand
TECHNICAL DATA:
Required space mm: 830 x 860 x H 1150
01 Vertical brush KW 0,37
Motion: right - left
Weight Kg: 250
Brushing machines, Second hand
TECHNICAL DATA:
Weight Kg: 1020
Milling machines, Second hand
Technical specifications:
CNC-Machining Centre for drill, mortise, mill, keyseat.
Working area: 4400 x 300 mm
Max working width: 210 mm...
Machining centers, Second hand
TECHNICAL DATA:
Working dimension X mm: 7200
Working dimension Y mm: 2010
Working dimension Z mm: 300
Working tables mm: 2700 x 1500
Main...
Machining centers, Second hand
TECHNICAL DATA:
Workpiece width max mm: 1700
Thickness max mm: 100
02 work benches mm: 5000 x 1700
Rollers diameter (cotton) mm: 350...
Polishing machines, Second hand
TECHNICAL DATA:
Working width mm: 400
Workpiece length min mm: 350
Thickness mm: 150
No 2 brushing units (Turnable)
Total connection...
Brushing machines, Second hand
TECHNICAL DATA:
Working width mm: 400
Workpiece length min mm: 350
Thickness mm: 150
No 2 brushing units (Turnable)
Total connection...
Brushing machines, Second hand
