- saw blade diameter - currently 250 mm, maximum 400 mm
- shaft with a diameter of 30 mm
- disc lowered at an angle, up to 45 de...
Poland, Second hand
* capacity 984 l / min
* main engine power 7.5 kW
* 500 l tank
* maximum operating pressure 10.0 atm
* built-in refrigerant dr...
New, Poland
Below are some useful information about the feed:
* 3 pull rollers
* forward / reverse rotation
* speed control on the switch...
Poland, Second hand
* dimensions of shelves 220 x 90 cm
* clean, straight, unbent shelves and no dents
* shelf clearance - 50 cm
* 6 pressure pisto...
Poland, Second hand
* working width 11,000 mm
* max working height 160 mm
* 3 grinding aggregates:
- the first steel shaft for calibration with a d...
Poland, Second hand
* working width 970 mm
* max working height 160 mm
* 2 grinding aggregates
- the first aggregate equipped with two shafts, hard...
Poland, Second hand
* belt width 150 mm
* adjustable shoe for sanding veneers on one side and "back" 13x76 cm on the other
* table with an attachmen...
Poland, Second hand
The basic parameters of this compressor are:
* capacity 6120 l / min at a maximum pressure of 8.5 bar
* main engine power 37 k...
New, Poland
* max working width - 300 mm
* max working height - 250 mm
* minimum element length - 250 mm
* 2 brush units with a diameter of...
Poland, Second hand
* working width 230 mm
* working height 125 mm
* vertical heads on one engine with a power of 7.5 kW
* horizontal heads on sepa...
New, Poland
SISTEMA DI CONTROLLO
• Controllo numerico
CARATTERISTICHE TECNICHE
• Area utile di lavoro “X” (min - max): 300 – 2.500 mm
• Ar...
Italy, Second hand
* inner diameter barrel and briquette 70 mm
* 7.5 kW motor
* sawdust tank with a volume of about 0.9 m3 and a diameter of 100 cm...
Poland, Second hand
CONTROL SYSTEM
• Numerical control PC based
• Software BIESSEWORKS
TECHNICAL FEATURES
• Useful working sizes “X” (min -...
Italy, Second hand
Cod: (005711)
Max. panel width: 4500 mm Max. panel length: 2200 mm Main saw blade projection: 95 mm No of Rip saw G...
Italy, Second hand
CONTOURING MACHINE double SHAPER BALESTRINI C70.
2 engines toupie shafts 10+10 hp. workable width 360 mm. height 120 mm workabl...
Italy, Second hand
-TA.TP
Italy, Second hand
I sell the top multiple boring machine Detel M-13, year 2007.
3-spindle.
Motor Perske 2,0kW
Very good condition.
Available imm...
Slovakia, Second hand
Hydraulic lifting platform for operator capacity Kg. 200, Sordella Spa brand, used
Italy, Second hand
Cefla oven with nr. 3 infrared lamps (IR).
Independent ignition.
Thermoregulator.
Transport with roller shutter 1300x1500...
Italy, Second hand
- Working dimentions 4.500 x 4500 mm
- Overhauled Blade 110 mm
- Nr. 2 Moveable Units with 2 Clamps each one
- Nr. 5 Air blowin...
Italy, Second hand
Center with Stema Tabit 13.03 for insertion bought in 2018 and really almost new in excellent condition.
The machine was built...
Italy, Second hand
Omga Tr35i CE double miter saw - 3 meters 350mm blade - display - 3hp motor
Italy, Second hand
Jonsereds tenoner
Band saw
Puncher
Vintage cars of historical interest
Italy, Second hand
Kirchner combined: Blade + hole punch
Screw press
Vintage cars of historical interest
Italy, Second hand
CONTROL SYSTEM
• Numerical control XNC
• Separated electrical cabinet
TECHNICAL FEATURES
• Useful working area (x-y-z): 2...
Italy, Second hand
CONTROL SYSTEM
• Numerical control OSAI
TECHNICAL FEATURES
• Useful working area: 2.200 x 2.600 mm
• Nr. 4 Vacuum pumps o...
Italy, Second hand
CONTROL SYSTEM
• Numerical control based on PLC
• Separate control panel
TECHNICAL FEATURES
• Useful working length in...
Italy, Second hand
PRODUCT CODE: MO881-1187
Kaeser brand joinery compressor
Model SK 19
Year 2001 (C E)
Screw compressor with drying grou...
Italy, Second hand
PRODUCT CODE: MN804 - 1072
Olimpia brand suction bench
Ghibli 3000 model
Year 2021 (C E)
New suction bench for sanding...
Italy, Second hand
Machining center for CNI panels
BIESSE ROVER 30
CE standards, worktop 4380 X 1240 mm, 8 bars, pantograph group, boring group...
Italy, Second hand
ITALMECCANICA ONLYWOOD / 6 AV brushing machine
CE standards
Italy, Second hand
SCM SUPERSET NT moulder
1st Lower shaft
2nd shaft RH
3rd shaft SX
4th Upper shaft
5th Upper shaft
6th Lower shaft
Net w...
Italy, Second hand
Machining center for CNI ESSETEAM EXAKTA panels
CE standards, pantograph group, boring group, multifunction worktop mm. 3000 x...
Italy, Second hand
STEMAC sizing machine
Working width mm: 1100
Italy, Second hand
SCM RECORD 210 NT TVN machining center
CE standards, 4 axes with double electrospindle, worktable 7400 x 1590 mm, 10 bars with...
Italy, Second hand
GRIGGIO UNICA SAFE squaring machine
CE standards, motorized lifting and tilting, motorized bar, hanging panel, blade ignition o...
Italy, Second hand
ITALPRESSE FORMATIC 25-11 / P membrane press
CE standards, worktop mm: 2400 x 1080
...
Italy, Second hand
OMEC 650M dovetailing machine
CE standards, milling machine with 1 spindle tpm 16500, interaxis of the joints mm 25-40-50-80....
Italy, Second hand
SAC sizing machine
Working width mm: 1100
Italy, Second hand
- saw blade diameter - currently 250 mm, maximum 400 mm - shaft with a diameter of 30 mm - disc lowered at an angle, up to 45 de...7 200,00 €2022
Poland, Second hand
* capacity 984 l / min * main engine power 7.5 kW * 500 l tank * maximum operating pressure 10.0 atm * built-in refrigerant dr...5 200,00 €2022
Below are some useful information about the feed: * 3 pull rollers * forward / reverse rotation * speed control on the switch...9 500,00 €
* dimensions of shelves 220 x 90 cm * clean, straight, unbent shelves and no dents * shelf clearance - 50 cm * 6 pressure pisto...8 500,00 €2016
* working width 11,000 mm * max working height 160 mm * 3 grinding aggregates: - the first steel shaft for calibration with a d...18 000,00 €1998
* working width 970 mm * max working height 160 mm * 2 grinding aggregates - the first aggregate equipped with two shafts, hard...7 200,00 €2022
* belt width 150 mm * adjustable shoe for sanding veneers on one side and "back" 13x76 cm on the other * table with an attachmen...1 500,00 €
The basic parameters of this compressor are: * capacity 6120 l / min at a maximum pressure of 8.5 bar * main engine power 37 k...6 000,00 €2022
* max working width - 300 mm * max working height - 250 mm * minimum element length - 250 mm * 2 brush units with a diameter of...5 000,00 €1998
* working width 230 mm * working height 125 mm * vertical heads on one engine with a power of 7.5 kW * horizontal heads on sepa...4 500,00 €2022
SISTEMA DI CONTROLLO • Controllo numerico CARATTERISTICHE TECNICHE • Area utile di lavoro “X” (min - max): 300 – 2.500 mm • Ar...2006
Italy, Second hand
* inner diameter barrel and briquette 70 mm * 7.5 kW motor * sawdust tank with a volume of about 0.9 m3 and a diameter of 100 cm...4 500,00 €2001
CONTROL SYSTEM • Numerical control PC based • Software BIESSEWORKS TECHNICAL FEATURES • Useful working sizes “X” (min -...2010
Cod: (005711) Max. panel width: 4500 mm Max. panel length: 2200 mm Main saw blade projection: 95 mm No of Rip saw G...
Italy, Second hand
CONTOURING MACHINE double SHAPER BALESTRINI C70. 2 engines toupie shafts 10+10 hp. workable width 360 mm. height 120 mm workabl...
Italy, Second hand
-TA.TP2011
Italy, Second hand
I sell the top multiple boring machine Detel M-13, year 2007. 3-spindle. Motor Perske 2,0kW Very good condition. Available imm...1 500,00 €2007
Slovakia, Second hand
Hydraulic lifting platform for operator capacity Kg. 200, Sordella Spa brand, used
Italy, Second hand
Cefla oven with nr. 3 infrared lamps (IR). Independent ignition. Thermoregulator. Transport with roller shutter 1300x1500...2000
Italy, Second hand
- Working dimentions 4.500 x 4500 mm - Overhauled Blade 110 mm - Nr. 2 Moveable Units with 2 Clamps each one - Nr. 5 Air blowin...2005
Italy, Second hand
Center with Stema Tabit 13.03 for insertion bought in 2018 and really almost new in excellent condition. The machine was built...2018
Italy, Second hand
Omga Tr35i CE double miter saw - 3 meters 350mm blade - display - 3hp motor
Jonsereds tenoner Band saw Puncher Vintage cars of historical interest
Italy, Second hand
Kirchner combined: Blade + hole punch Screw press Vintage cars of historical interest
CONTROL SYSTEM • Numerical control XNC • Separated electrical cabinet TECHNICAL FEATURES • Useful working area (x-y-z): 2...1999
CONTROL SYSTEM • Numerical control OSAI TECHNICAL FEATURES • Useful working area: 2.200 x 2.600 mm • Nr. 4 Vacuum pumps o...2002
CONTROL SYSTEM • Numerical control based on PLC • Separate control panel TECHNICAL FEATURES • Useful working length in...1997
PRODUCT CODE: MO881-1187 Kaeser brand joinery compressor Model SK 19 Year 2001 (C E) Screw compressor with drying grou...2001
Italy, Second hand
PRODUCT CODE: MN804 - 1072 Olimpia brand suction bench Ghibli 3000 model Year 2021 (C E) New suction bench for sanding...2021
Machining center for CNI panels BIESSE ROVER 30 CE standards, worktop 4380 X 1240 mm, 8 bars, pantograph group, boring group...1998
Italy, Second hand
ITALMECCANICA ONLYWOOD / 6 AV brushing machine CE standards
SCM SUPERSET NT moulder 1st Lower shaft 2nd shaft RH 3rd shaft SX 4th Upper shaft 5th Upper shaft 6th Lower shaft Net w...2014
Machining center for CNI ESSETEAM EXAKTA panels CE standards, pantograph group, boring group, multifunction worktop mm. 3000 x...1998
STEMAC sizing machine Working width mm: 1100
SCM RECORD 210 NT TVN machining center CE standards, 4 axes with double electrospindle, worktable 7400 x 1590 mm, 10 bars with...2007
GRIGGIO UNICA SAFE squaring machine CE standards, motorized lifting and tilting, motorized bar, hanging panel, blade ignition o...2017
ITALPRESSE FORMATIC 25-11 / P membrane press CE standards, worktop mm: 2400 x 1080 ...2009
OMEC 650M dovetailing machine CE standards, milling machine with 1 spindle tpm 16500, interaxis of the joints mm 25-40-50-80....2009
SAC sizing machine Working width mm: 1100