Surface planer for carpentry
SCM brand
Model F520 E
Year 2000 (C E)
520 mm worktop
Complete with electrical adjustm...
Italy, Second hand
Through-overturner with crossed belts
• Useful panel length (min – max): 270 – 3.000 mm
• Useful panel width (min – max): 220 –...
Italy, Second hand
- saw blade diameter - currently 250 mm, maximum 400 mm
- shaft with a diameter of 30 mm
- disc lowered at an angle, up to 45 de...
Poland, Second hand
* dimensions of shelves 300 x 130 cm
* shelves clean, straight, not bent and no dents, I would say perfect condition
* water-hea...
Poland, Second hand
* working width 190 mm
* working height 120 mm
* vertical heads on one engine with a power of 5.5 kW
* horizontal heads on one...
Poland, Second hand
* capacity 984 l / min
* main engine power 7.5 kW
* 500 l tank
* maximum operating pressure 10.0 atm
* built-in refrigerant dr...
New, Poland
The basic parameters of this compressor are:
* capacity 6120 l / min at a maximum pressure of 8.5 bar
* main engine power 37 k...
New, Poland
* max working width - 300 mm
* max working height - 250 mm
* minimum element length - 250 mm
* 2 brush units with a diameter of...
Poland, Second hand
Below are some useful information about the feed:
* 3 pull rollers
* forward / reverse rotation
* speed control on the switch...
Poland, Second hand
* dimensions of shelves 220 x 90 cm
* clean, straight, unbent shelves and no dents
* shelf clearance - 50 cm
* 6 pressure pisto...
Poland, Second hand
* working width 11,000 mm
* max working height 160 mm
* 3 grinding aggregates:
- the first steel shaft for calibration with a d...
Poland, Second hand
* belt width 150 mm
* adjustable shoe for sanding veneers on one side and "back" 13x76 cm on the other
* table with an attachmen...
Poland, Second hand
* working width 970 mm
* max working height 160 mm
* 2 grinding aggregates
- the first aggregate equipped with two shafts, hard...
Poland, Second hand
* working width 230 mm
* working height 125 mm
* vertical heads on one engine with a power of 7.5 kW
* horizontal heads on sepa...
New, Poland
SISTEMA DI CONTROLLO
• Controllo numerico
CARATTERISTICHE TECNICHE
• Area utile di lavoro “X” (min - max): 300 – 2.500 mm
• Ar...
Italy, Second hand
* inner diameter barrel and briquette 70 mm
* 7.5 kW motor
* sawdust tank with a volume of about 0.9 m3 and a diameter of 100 cm...
Poland, Second hand
CONTROL SYSTEM
• Numerical control PC based
• Software BIESSEWORKS
TECHNICAL FEATURES
• Useful working sizes “X” (min -...
Italy, Second hand
Cod: (005711)
Max. panel width: 4500 mm Max. panel length: 2200 mm Main saw blade projection: 95 mm No of Rip saw G...
Italy, Second hand
CONTOURING MACHINE double SHAPER BALESTRINI C70.
2 engines toupie shafts 10+10 hp. workable width 360 mm. height 120 mm workabl...
Italy, Second hand
-TA.TP
Italy, Second hand
I sell the top multiple boring machine Detel M-13, year 2007.
3-spindle.
Motor Perske 2,0kW
Very good condition.
Available imm...
Slovakia, Second hand
Hydraulic lifting platform for operator capacity Kg. 200, Sordella Spa brand, used
Italy, Second hand
Camam double belt mortiser with 2 horizontal and 3 vertical spindles, used
Italy, Second hand
Horizontal mortiser brand Balestrini model 2CAP, with 1 point per side, used, tested.
Italy, Second hand
Cefla oven with nr. 3 infrared lamps (IR).
Independent ignition.
Thermoregulator.
Transport with roller shutter 1300x1500...
Italy, Second hand
- Working dimentions 4.500 x 4500 mm
- Overhauled Blade 110 mm
- Nr. 2 Moveable Units with 2 Clamps each one
- Nr. 5 Air blowin...
Italy, Second hand
Center with Stema Tabit 13.03 for insertion bought in 2018 and really almost new in excellent condition.
The machine was built...
Italy, Second hand
Omga Tr35i CE double miter saw - 3 meters 350mm blade - display - 3hp motor
Italy, Second hand
Jonsereds tenoner
Band saw
Puncher
Vintage cars of historical interest
Italy, Second hand
Kirchner combined: Blade + hole punch
Screw press
Vintage cars of historical interest
Italy, Second hand
CONTROL SYSTEM
• Numerical control XNC
• Separated electrical cabinet
TECHNICAL FEATURES
• Useful working area (x-y-z): 2...
Italy, Second hand
CONTROL SYSTEM
• Numerical control based on PLC
• Separate control panel
TECHNICAL FEATURES
• Useful working length in...
Italy, Second hand
CONTROL SYSTEM
• Numerical control OSAI
TECHNICAL FEATURES
• Useful working area: 2.200 x 2.600 mm
• Nr. 4 Vacuum pumps o...
Italy, Second hand
PRODUCT CODE: MN864 - 1142
Casadei brand thickness planer
Model R510 H3
Year 1994
Working size 510 mm
5.5 HP engine...
Italy, Second hand
PRODUCT CODE: SO882 - 1188
SCM machining center
Record 130 model
Year 2002 (C E)
4 axis machining center with nesting...
Italy, Second hand
PRODUCT CODE: MO881-1187
Kaeser brand joinery compressor
Model SK 19
Year 2001 (C E)
Screw compressor with drying grou...
Italy, Second hand
PRODUCT CODE: MN804 - 1072
Olimpia brand suction bench
Ghibli 3000 model
Year 2021 (C E)
New suction bench for sanding...
Italy, Second hand
Machining center for CNI panels
BIESSE ROVER 30
CE standards, worktop 4380 X 1240 mm, 8 bars, pantograph group, boring group...
Italy, Second hand
Squaring machine SCM SI 400 EP CLASS
CE standards, motorized lifting and tilting managed by control panel, motorized guide, 3 d...
Italy, Second hand
Surface planer for carpentry SCM brand Model F520 E Year 2000 (C E) 520 mm worktop Complete with electrical adjustm...2000
Italy, Second hand
Through-overturner with crossed belts • Useful panel length (min – max): 270 – 3.000 mm • Useful panel width (min – max): 220 –...1998
Italy, Second hand
- saw blade diameter - currently 250 mm, maximum 400 mm - shaft with a diameter of 30 mm - disc lowered at an angle, up to 45 de...7 200,00 €2022
Poland, Second hand
* dimensions of shelves 300 x 130 cm * shelves clean, straight, not bent and no dents, I would say perfect condition * water-hea...4 500,00 €2007
* working width 190 mm * working height 120 mm * vertical heads on one engine with a power of 5.5 kW * horizontal heads on one...12 500,00 €2001
* capacity 984 l / min * main engine power 7.5 kW * 500 l tank * maximum operating pressure 10.0 atm * built-in refrigerant dr...5 200,00 €2022
The basic parameters of this compressor are: * capacity 6120 l / min at a maximum pressure of 8.5 bar * main engine power 37 k...6 000,00 €2022
* max working width - 300 mm * max working height - 250 mm * minimum element length - 250 mm * 2 brush units with a diameter of...5 000,00 €1998
Below are some useful information about the feed: * 3 pull rollers * forward / reverse rotation * speed control on the switch...9 500,00 €
* dimensions of shelves 220 x 90 cm * clean, straight, unbent shelves and no dents * shelf clearance - 50 cm * 6 pressure pisto...8 500,00 €2016
* working width 11,000 mm * max working height 160 mm * 3 grinding aggregates: - the first steel shaft for calibration with a d...18 000,00 €1998
* belt width 150 mm * adjustable shoe for sanding veneers on one side and "back" 13x76 cm on the other * table with an attachmen...1 500,00 €
* working width 970 mm * max working height 160 mm * 2 grinding aggregates - the first aggregate equipped with two shafts, hard...7 200,00 €2022
* working width 230 mm * working height 125 mm * vertical heads on one engine with a power of 7.5 kW * horizontal heads on sepa...4 500,00 €2022
SISTEMA DI CONTROLLO • Controllo numerico CARATTERISTICHE TECNICHE • Area utile di lavoro “X” (min - max): 300 – 2.500 mm • Ar...2006
* inner diameter barrel and briquette 70 mm * 7.5 kW motor * sawdust tank with a volume of about 0.9 m3 and a diameter of 100 cm...4 500,00 €2001
CONTROL SYSTEM • Numerical control PC based • Software BIESSEWORKS TECHNICAL FEATURES • Useful working sizes “X” (min -...2010
Cod: (005711) Max. panel width: 4500 mm Max. panel length: 2200 mm Main saw blade projection: 95 mm No of Rip saw G...
Italy, Second hand
CONTOURING MACHINE double SHAPER BALESTRINI C70. 2 engines toupie shafts 10+10 hp. workable width 360 mm. height 120 mm workabl...
Italy, Second hand
-TA.TP2011
Italy, Second hand
I sell the top multiple boring machine Detel M-13, year 2007. 3-spindle. Motor Perske 2,0kW Very good condition. Available imm...1 500,00 €2007
Slovakia, Second hand
Hydraulic lifting platform for operator capacity Kg. 200, Sordella Spa brand, used
Italy, Second hand
Camam double belt mortiser with 2 horizontal and 3 vertical spindles, used
Horizontal mortiser brand Balestrini model 2CAP, with 1 point per side, used, tested.
Cefla oven with nr. 3 infrared lamps (IR). Independent ignition. Thermoregulator. Transport with roller shutter 1300x1500...2000
Italy, Second hand
- Working dimentions 4.500 x 4500 mm - Overhauled Blade 110 mm - Nr. 2 Moveable Units with 2 Clamps each one - Nr. 5 Air blowin...2005
Italy, Second hand
Center with Stema Tabit 13.03 for insertion bought in 2018 and really almost new in excellent condition. The machine was built...2018
Italy, Second hand
Omga Tr35i CE double miter saw - 3 meters 350mm blade - display - 3hp motor
Jonsereds tenoner Band saw Puncher Vintage cars of historical interest
Italy, Second hand
Kirchner combined: Blade + hole punch Screw press Vintage cars of historical interest
CONTROL SYSTEM • Numerical control XNC • Separated electrical cabinet TECHNICAL FEATURES • Useful working area (x-y-z): 2...1999
CONTROL SYSTEM • Numerical control based on PLC • Separate control panel TECHNICAL FEATURES • Useful working length in...1997
CONTROL SYSTEM • Numerical control OSAI TECHNICAL FEATURES • Useful working area: 2.200 x 2.600 mm • Nr. 4 Vacuum pumps o...2002
PRODUCT CODE: MN864 - 1142 Casadei brand thickness planer Model R510 H3 Year 1994 Working size 510 mm 5.5 HP engine...1994
PRODUCT CODE: SO882 - 1188 SCM machining center Record 130 model Year 2002 (C E) 4 axis machining center with nesting...2005
PRODUCT CODE: MO881-1187 Kaeser brand joinery compressor Model SK 19 Year 2001 (C E) Screw compressor with drying grou...2001
PRODUCT CODE: MN804 - 1072 Olimpia brand suction bench Ghibli 3000 model Year 2021 (C E) New suction bench for sanding...2021
Machining center for CNI panels BIESSE ROVER 30 CE standards, worktop 4380 X 1240 mm, 8 bars, pantograph group, boring group...1998
Italy, Second hand
Squaring machine SCM SI 400 EP CLASS CE standards, motorized lifting and tilting managed by control panel, motorized guide, 3 d...2011