Teknodoor 3001 - double mitre saw blades at 90° and 45°

Make: 
Balestrierimac - woodworking machinery
Model: 
Teknodoor 3001
Description: 

Teknodoor 3001 - double mitre saw blades at 90° and 45° - automatic boring - milling for lodging of counterplates, zippers and concealed hinges

Automatic production unity for the workings of doors frames with coupling joint at 45°. Machine controlled by 4 axis CN.

STANDARD EQUIPMENT

Mobile head cutting unit with motorized positioning. The sliding movement is made on tempered guides and ball recirculation racks.
NR.2 Cutting units with blade of Ø 400: Each unit is driven by a motor of Kw 3.
NR.3 support tables pieces supplied with pneumatic vertical clamps.
NR.1 Intermediate support table.
NR.2 Horizontal pneumatic clamps.
NR.1 Controlled axe for length programmer.
Automatic inclination of the blades.
NR.2 Boring units with inclination 0 - 45 °, supplied with head at 3 mandrels interface of 32 mm: Independent motors of Kw. 1,5 (r.p.m. 5500); Sliding movement on rolling slide units; Mechanical reader for vertical and horizontal adjustments.
NR.1 Milling Unit with 3 controlled and interpolated axes.
Electronic control with video: Software with easy graphic interface and default macros for standard works.
Pressor safety controlled by CN.

TECHNICAL DATA

Max. with of the door frames mm 210.
Max height of the cut: mm 80 (with blades at 45°); mm 120 (with blades at 90°).
Min. length of the cut: mm 880 (with blades at 45°); mm 680 (with blades at 45° with alternative cut); mm 650 (with blades at 90°).
Max. length of the cut 2800 mm - motor 1.3 Nm (C axis).
Milling unit (rotation 0 - 90°) with electro mandrel motor at Kw 3,3.
X axis work stroke 2500 mm – power 4,8 Nm.
Y axis work stroke 220 mm – power 2,4 Nm.
Z axis work stroke 100 mm – power 2,4 Nm.
Machine executed according to CE rules, included the perimetric protection.

OPTIONAL

Boring units rotation (0° - 45°).
Horizontal clamps for frames.
Table with nylon balls for the rotation of the panel door.
Electrical spindle at KW 5,6 - ER 32.
Electrical spindle with rapid change with pneumatic system of the tools.

Additional milling/drilling unit with tool tongs ER 25 and 2 Kw Motor (for corner milling on hinges seat).

Additional milling unit with tool tongs ER 32 and 3,3 Kw Motor.

Automatic unloader. 

Milling unit controlled inclination

TEKNODOOR 3001 - DOUBLE MITRE SAW BLADES AT 90° AND 45° - AUTOMATIC BORING - MILLING FOR LODGING OF COUNTERPLATES, ZIPPERS AND C

Contact

BALESTRIERIMAC's picture
BALESTRIERIMAC Woodworking Machinery
ITALY
Pesaro

+39 340 5143156

Contact seller

CAPTCHA
Please confirm that you are not a Robot. To prevent automated spam submissions.

Vertical Tabs