Small compact miltirip saw machine KUSING RP - 200.
Technical parameters:
Main engine power : 7,5 / 11 kW
Shaft diameter : 30 mm
Shaft length...
Multi rip saws, New
Multiripsaw with feed belt suitable for very precise cutting low materials. The perfect solution for parquet manufacturers.
Technical parameters...
Multi rip saws, New
Multiripsaw with feed belt suitable for very precise cutting low materials. The perfect solution for parquet manufacturers.
Technical parameters...
Rip saw machines, New
I sell the combined tenonging machine with drilling head BALESTRINI I2F
1 tilting table with pneumatic material pressure.
Automatic cutting saw...
Tenoning machines, Second hand
I sell the 3-axis CNC working centre HOLZ-HER ECO-MASTER 7113 with beam table
Year 2000.
Configuration:
3-axis main spindle 7,5 KW
Tool...
Machining centers, Second hand
I sell the 3-axis CNC working centre HOLZ-HER PRO-MASTER 7023 with beam table
Year 2009.
Configuration:
3-axis main spindle 6 KW
Tool magazine...
Machining centers, Second hand
I sell the format sliding table saw with scoring
Manufacutrer: FELDER
Model: K975
Year 2013
Cutting length 3200mm.
Cutting width 1350mm...
Sliding table saws, Second hand
I sell the vertical throughfeed CNC working centre SCM Morbidelli Cyflex S, Year 2016.
Configuration:
1 pc. Milling spindle 5,5 kW
12 + 4 + 2...
Machining centers, Second hand
I sell the format sliding table saw with scoring
Manufacutrer: OTTO MARTIN
Model: T60 Classic
Year 2007
Cutting length 3200mm.
Cutting...
Sliding table saws, Second hand
I sell the automatic pneumatic end cutting saw KuangYung PX60 CFS 200B, year 2012.
Motor power 7,5kW
Input table automatic feeding 5,10m (...
Crosscut saws, Second hand
I sell the combined surface planing - thicknessing machine SCM 2250.
Max. working width 510mm
Spindle 4-knives 510x120mm
Total weight 890kg...
Combination machines, Second hand
I sell the complete saw mill angular saw + sorting device.
Manufacturer: Strojcad Michalovce, Slovakia
Model angular saw: D9 LH6
Model...
Log band saws, Second hand
I sell the automatic CNC working centre for BLOCK-HOUSE production Krüsi CM-40. Year 1994.
Incutting saw
Tenoning head Top + Bottom
Tenoning...
Machining centers, Second hand
I sell the fourside moulder Weinig Unimat 300
Feeding speed 5-30 m/min.
Working width 230mm
Working height 130mm
5 spindles
Configuration:...
Four sided planers, Second hand
I sell the Hot Air drying tunnel BURKLE
Modell: Easy Dry JET 1300
Filter: TRDUE / 700 m3/hr.
Ventilator 7,5kW / 6800m3/hr. / 35 m/s
Working...
Aspiration systems, New
I sell the combined machine format sliding table saw with scoring + spindle moulder
Manufacutrer: FELDER Austria
Model: KF700S.
Year 2011....
Combination machines, Second hand
I sell the vertical band saw Felder Hammer N4400.
Motor power 3,0KW
Suitable for saw bands up to 35mm.
Table tilting.
Year 2009
Condition very...
Band saws, Second hand
I sell the complete line with vertical foil wrapping machine.
Producer: MANEX, Slovakia
Feeding lines: HOMAG LIGMATECH
Model: TOSA 120
Year...
Packing machines, Second hand
I sell the pneumatic end cutting saw Stromab TR350, year 2016.
Motor power 4,0kW
Saw blade diameter fi.350x30mm
Cutting schema ver.1 max. 210x30mm...
Crosscut saws, Second hand
I sell the new fourside moulder LEADERMAC COMPACT 430,
New machine year 2024. Showroom machine !
Configuration 4 spindles:
Bottom 7,...
Four sided planers, New
I sell the new fourside moulder LEADERMAC COMPACT 623C (2M),
New machine year 2024. Showroom machine !
Configuration 6 spindles: ...
Four sided planers, New
I sell the complete aspiration system ELBH
5x Ventilator 7,5kW
Total power apprx. 45.000 m3 / hr.
Recuperation system for returning the hot air...
Aspiration systems, Second hand
I sell the new widebelt sanding machine Casadei Libra 45 RCT 110
Year 2022.
Configuration:
Steel moulding cylinder with spiral knives
Combi...
Wide belt sanders, New
I sell the automatic CNC working centre for BLOCK-HOUSE production AUER BL100.
Year 2001.
Input table / Max. Element length 9,00m...
Tenoning machines, Second hand
I sell the rip saw Raimann JRION HFS-170-3200.
Year 1995 / Kuper refurbished 2002.
Cutting length 3300mm.
Cutting height 170mm.
Main motor 11kW...
Rip saw machines, Second hand
I sell the heavy duty fourside moulder GAU-JING 930D-CE.
Element max. 300x200mm !
Feeding speed up to 36m/min !
5,00m long infeed table hard...
Four sided planers, Second hand
I sell the multiple boring machine DETTEL M2232
22-spindle x distance 32mm
Turning head 0-90°
screw-quick-change bushes included. Type Vitap.
2...
Boring machines, Second hand
I sell the sharpening machine for moulding heads TOS Svitavy.
Angular setting.
Very good condition.
Avialable immediately.
Grinding machines, Second hand
I sell the combined surface planing - thicknessing machine with spiral head and mortising machine VITAL FS41NSD.
New machine year 2024 with...
Combination machines, New
I sell the combined surface planing - thicknessing machine with spiral head and mortising machine VITAL FS32NSD.
New machine year 2024 with...
Combination machines, New
I sell the combined surface planing - thicknessing machine with spiral head VITAL FS41N.
New machine year 2024 with warranty.
Max. working...
Combination machines, New
I sell the combined surface planing - thicknessing machine with spiral head VITAL FS32NS.
New machine year 2024 with warranty.
Max. working...
Combination machines, New
I sell the combined surface planing - thicknessing machine VITAL FS41N.
New machine year 2024 with warranty.
Max. working width 410mm...
Combination machines, New
I sell the combined surface planing - thicknessing machine VITAL FS32N.
New machine year 2024 with warranty.
Max. working width 320mm...
Combination machines, New
I sell the 5-axis CNC working centre Biesse Rover C6.40 with beam table, year 2012.
Configuration:
5-axis main spindle HSD 15KW/S6 (12KW/S1) /...
Machining centers, Second hand
I sell the fully equipped edge banding machine BRANDT Optimat KDF 550 C, year 2006:
Configuration:
Entry fence manual adjustable
Premilling...
Edgebanders, Second hand
I sell the 3-axis CNC working centre Biesse Rover 24L with beam table, year 2004.
Configuration:
3-axis main spindle HSD recently full...
Machining centers, Second hand
I sell the industrial thicknessing machine LEDINEK ROTOLES 400 D-S.
Machine year 2001.
Max. working width 400mm
Max. working height 2-150mm...
Thicknessing planers, Second hand
I sell the heavy duty fourside moulder SK MACHINERY 907S.
Element max. 240x150mm !
7 spindle configuration:
Bottom 5,5kW (7,5HP) / 6000 rpm...
Four sided planers, Second hand
I sell the window profiling automat centre Weinig Univar 10
Year 1998.
Moulding heads OERTLI.
Available immediately.
Unit price 8.500 euro. 4 pcs...
Machining centers, Window and door machinery, Second hand
I sell the window tenoning profiling centre Weinig Unitec 10
Year 1998.
Moulding heads OERTLI.
Available immediately.
Unit price 8.500 euro. 3...
Window and door machinery, Tenoning machines, Second hand
I sell the panel beam saw HOLZ-HER CUT85. Year 2004.
Cutting size 3200x3200mm.
Cutting height 85mm.
Max saw blade diameters 350 + 180mm
Main...
Beam saws, Second hand
I sell the automatic vertical saw without scoring knives HOLZ-HER Supercut.
Cutting range 5300x2200mm
Motor 3,0kW.
Cutting head tilting 0-...
Vertical panel saws, Second hand
I sell the edge banding machine Biesse JADE 240
Year 2020.
Configuration:
Entry fence manual adjustable
Premilling manual adjustable...
Edgebanders, Second hand
I sell the throughfeed CNC drilling machine HIRZT Livra/B, Year 2009.
Working width up to 820mm
Configuration:
14 + 6 + 2 pcs. drilling units...
Machining centers, Second hand
I sell the press for glulam glued massive wood DRESOMET 4N, year 2009.
Material size 2800 X 800 x 60mm
4 working areas, manual rotation.
9...
Presses, Second hand
I sell the edge banding machine Holz-Her Sprint 1310, year 2004.
Configuration:
Premilling
Edge banding patron glue
End cutting saws...
Edgebanders, Second hand
I sell the fully equipped edge banding machine SCM Olimpic S3000, year 2011:
Configuration:
Entry fence servomotorical adjustable
Premilling...
Edgebanders, Second hand
I sell the Stacking / Destacking device HOMAG BARGSTEDT TBH22/D/25/12, year 2001.
Stacking device one side feeding / also suitable for pallets...
Stacking device, Second hand
I sell the multirip saw of czech production TOS Svitavy PKSN32.
Cutting height under the blade 120mm / possibility of adjustment
Width of cut on...
Multi rip saws, Second hand
I sell thesaw band sharpening machine Mebor MN-7, Year 2019
Sanding Disc included.
Made in Slovenia.
Condition like new. Available immediately.
Grinding machines, Second hand
I sell the screw compressor:
Atlas Copco GA208 PACK
Motor - 18,5kW,
Power - 2,6 m3/min.,
Pressed air max.8 bar
Dimensions 2200...
Compressors, Second hand
I sell the bottom sanding machine Kuhlmeyer KSM 400.3U. Year 2001.
Configuration sanding cylinder - cylinder - cylinder.
Working width 400mm....
Sanding machines, Second hand
I sell the panel beam saw HOLZMA HPP200/38/38. Year 2016.
Cutting size 3800x3800mm.
Cutting height 60mm.
Max saw blade diameters 350 + 200mm
Main...
Beam saws, Second hand
