Деревообрабатывающие станки из - Mercator S.R.L. - pag 1

  • GUILLIET-O moulder, mod. KXL, used, C473
    GUILLIET-O KXL
    Infeed pre-planer length: 1970 mm Working width: 230 mm Working height: 110 mm Shafts: Ø 40 mm Number of shafts: 4 Cardan shaft Installed power...
    Четырехсторонний станок, Подержанных
    Mercator
  • Primultini 1100 band saw, used, C466
    Primultini 1100
    Table: 960 x 1100 Flywheels: Ø 1100 mm Blade width: 120 mm Blade guide with electric adjustment Electric blade adjustment Installed power: 22 kW...
    Ленточнопильные вертикальные, Подержанных
    Mercator
  • Leadermac LMC-423S moulder, used, C462
    Leadermac LMC-423S
    Infeed pre-planer length: 2500 mm Working width: 240 mm Working height: 130 mm Shafts: Ø 40 mm Number of shafts: 4 Cardan shaft drive (2.9 kW)...
    Четырехсторонний станок, Подержанных
    Mercator
  • Robopac automatic wrapping machine, model Spiror 400 S, used, C457
    Robopac Spiror 400 S
    Rotary ring machine operation: Diameter mm: 400 Installed power: 2.7 kW EQUIPMENT: 1 loading roller conveyor 1 unloading roller conveyor
    Упаковочные машины, Подержанных
    Mercator
  • Band saw, Pezzolato, mod. S 900 EC, used, C449
    Pezzolato S 900 EC
    Table: 1000 x 1000 mm Flywheels: Ø 900 mm Blade length: 5985 mm Blade width: 108 mm Electronically adjustable blade guide Manual blade...
    Ленточнопильные вертикальные, Подержанных
    Mercator
  • Martin T 72A squaring machine, used, C441
    Martin T 72 A
    Carriage length: 3000 mm Saw blade: max. Ø 500 mm - with scoring blade max. Ø 400 mm Scoring blade: max. Ø 120 mm Manual height/tilt adjustment 45...
    Форматно-раскроечные - Циркулярные станки, Подержанных
    Mercator
  • SCM S520 Thicknesser, Used, C436
    SCM S520
    Working width: 520 mm Working height: max. 250 mm 4 knives Electronic height adjustment 4-speed feed Installed power: 5 kW
    Рейсмусовые станки, Подержанных
    Mercator
  • Used Italpresse Universal/CN press, C437
    Italpresse Universal/CN
    Working width: 3000 mm Working height: 2500 mm 4 clamps Pendant control panel TS/500 interface 4 safety photocells Installed power: 3 kW
    Вайма, Подержанных
    Mercator
  • Surface planer, SCm F520, used, C435
    SCM F520
    2 benches Total bench dimensions: 3000 x 520 mm 4-knife roller RPM: 5000 rpm Installed power: 4 kW
    Фуговальный станок, Подержанных
    Mercator
  • Weinig Profimat 23 moulder, used, C434
    Weinig Profimat 23
    Pre-planer entry length: 1970 mm Working width: 230 mm Working height: 120 mm Shafts: Ø 40 mm Number of shafts: 6 Cardan shaft drive (4 kW) RPM...
    Четырехсторонний станок, Подержанных
    Mercator
  • Weinig Unimat 300 moulder, used, C430
    Weinig Unimat 300
    Infeed pre-planer length: 1970 mm Working width: 230 mm Working height: 120 mm Shafts: Ø 40 mm Number of shafts: 5 Direct drive / PTO drive (0....
    Четырехсторонний станок, Подержанных
    Mercator
  • Martin T26 spindle moulder, used, C433
    Martin T26
    Table size: 2400 x 900 mm Expandable workbench 1 x 4-roller feeder (equipped with variator) Installed power: 5 kW Shaft: Ø 35 mm Motorized shaft...
    Фрезерный станок по дереву, Подержанных
    Mercator
  • Used Ambroset Giorgio M832 Beam Manipulator
    Ambroset Giorgio MN-IDR-10/14000
    Hydraulic manipulator with modular suction cup Capacity: 700 kg Number of suction cups: 16 Suction cup dimensions: 80 x 750 mm...
    5500.00 €
    Разнообразный, Подержанных
    Mercator
  • Moulder Weinig 140/4 Second hand, C427
    Weinig 140/4
    Length of infeed pre-planer: 1900 mm Working width: 190 mm Working height: 120 mm Shafts: Ø 35 mm Number of shafts: 6 Chain drive COMPOSITION...
    Четырехсторонний станок, Подержанных
    Mercator
  • Multi rip saw Gabbiani Oscmma/11 Second hand, C407m
    Gabbiani OSCMMA/11
    Belt width: 300 mm Axis: Ø 70 mm Blade: Ø 300 mm Working height: max. 110 mm Electronic height adjustment Adjustable feed speed (1.5 kW)...
    Многопильный станок дисковый, Подержанных
    Mercator
  • Briquette machine Costruzioni nazzareno Old.201 Second hand, C404
    Costruzioni Nazzareno OLD.201
    TECHNICAL DATA: Briquette: Ø 60 mm Production: 70 Kg/h Installed power: 7.5 kW EQUIPMENT: 01 mini-silos
    Оборудование для брикетирования, Подержанных
    Mercator
  • Weinig Powermat 500 moulder, used, C396
    Weinig Powermat 500
    Inlet pre-planer length: 2200 mm Working width: 230 mm Working height: 120 mm Shafts: Ø 40 mm Number of shafts: 5 Cardan shaft drive RPM:...
    Четырехсторонний станок, Подержанных
    Mercator
  • Grinding machine Weinig Rondamat 960 Second hand 2005, C390
    Weinig Rondamat 960
    TECHNICAL DATA: Workable tool: max. Ø 300 mm Tool length: max. 240 mm Installed power: 1.1 kW EQUIPMENT: Various types of grinding wheel
    Аточные станки, Подержанных
    Mercator
  • Wide belt sander Bütfering Optimat swt 215 l Second hand 2014, C401
    Bütfering OPTIMAT SWT 215 L
    Working width: 1340 mm Working height: 150 mm Steel calibrating roller: Ø 200 mm Abrasive belt development: 2100 x 1400 mm Installed power: 17 kW
    Калибровальные станки, Подержанных
    Mercator
  • Machining center Biesse Rover a3.30 Second hand 2007, C411
    Biesse Rover A3.30
    Working range: X: 3060 mm Y: 1260 mm Z: 150 mm 03 axes Automatic lubrication system 06 ATS tables (Length: 1200 mm) 018 carriages 06 rear...
    Обрабатывающие центры с ЧПУ, Подержанных
    Mercator
  • Colombo AM 33/AF corner system, used, C385
    Colombo AM 33 / AF
    Workable length: max. 3000 mm - min. 250 mm Workable thickness: min. 30 - max. 155 mm Workable width: max. 200 mm Tenoning area 01 end-...
    Производство окон, Подержанных
    Mercator
  • Thicknessing planer Primultini Nuova Second hand C397
    Primultini Nuova
    Working width: 500 mm Working height: 230 mm Electric height adjustment 2-speed towing 3-knife roller Installed power: 5.5 kW Voltage: 380 V...
    Рейсмусовые станки, Подержанных
    Mercator
  • Briquette machine Por ecomec Oscar Second hand 2000, C414
    Por Ecomec Oscar
    TECHNICAL DATA: Installed power: 9.2 kW Briquette: Ø 70 mm Complete with 13-bag filter room (Ø 160 x 550 mm)
    Оборудование для брикетирования, Подержанных
    Mercator
  • Machining center Holzher Uni-master 7226k Second hand 2005, C410
    Holzher UNI-MASTER 7226K
    Working range: X: 6200 mm Y: 1300 mm Z: 300 mm 08 suction cup tables 01 lateral tool magazine 18-slot revolver tool magazine Side stops...
    Обрабатывающие центры с ЧПУ, Подержанных
    Mercator
  • Bacci TSD/E rounding/tenoning machine, used, C058
    Bacci TSD/E
    TECHNICAL DATA: Installed power: 6 kW Working length: 1200 mm Tenon width: max 100 mm EQUIPMENT: 01 Soundproof chamber 01 Loader
    Шипорезные станки, Подержанных
    Mercator
  • CEFLA SORBINI roller coater, used, C324
    Cefla Sorbini Smartcoater laser roller
    TECHNICAL DATA: Working width: max. 1300 mm Working thickness: max. 80 mm Installed power: 9 kW 01 low pressure pump 04 painting groups...
    Покрасочные камеры, Подержанных
    Mercator
  • Horizontal shredder Weimar WLH 300, C342
    Weima WLH 300
    Wood shredder Weima Wlh 300 Second hand 2007 Installed power: 18.5 kW Inlet width: 300 mm Inlet height: 200 mm Rotor: Ø 252 mm...
    Дробилки древесные, Подержанных
    Mercator
  • Moulder Leadermac Lmc-723cug Second hand 2008 C366
    Leadermac LMC-723CUG
    TECHNICAL DATA: Maximum workable height: 160 mm Maximum workable width: 230 mm Input pre-planer length: 2100 mm Spindle diameter: 40 mm Number...
    Четырехсторонний станок, Подержанных
    Mercator
  • Wide belt sander Bütfering Sko 113 c Second hand 2011
    Bütfering SKO 113 C
    Working width: 1350 mm Abrasive belt width: 1370 mm Abrasive belt length: 1900 mm Steel roller: Ø 150 mm Working thickness: max. 150 mm Total...
    Калибровальные станки, Подержанных
    Mercator
  • DMC SYSTEM SY TC 1350 calibration and brushing line, used, C275
    DMC SYSTEM SY TC 1350
    A. 3-roller sanding unit Roll 1 - 85 shore Roll 2 - 65 shore Roll 3 - 55 shore Max sanding width mm: 1350 Max workable thickness mm: 170...
    Калибровальные станки, Подержанных
    Mercator
  • Wide belt sander Costa 70 ccc 1350 Second hand 1996, C277
    Costa 70 CCC 1350
    Development of abrasive belts: 1380 x 2620 mm Max workable height: 160 mm Roller diameter: 250 mm 03 independent motors total KW 36.0 Electronic...
    Калибровальные станки, Подержанных
    Mercator
  • TRANSPAK TP 601-D1 automatic strapping machine, C281
    Transpak TP 601-D1
    Strap width: 8-12 mm Strap thickness: 0.3-0.7 mm Hot plate welding Workbench size: 1200 x 620 mm Complete of: - automatic/manual...
    Упаковочные машины, Подержанных
    Mercator
  • Milling / Sanding machine PADE UINZE 2+2T 2500, C280
    Pade UINZE 2+2T 2500
    Max workable length mm: 2500 Max workable width mm: 350 01 - 02 milling units of 7.5 kW each. 03 - 04 milling/sanding units of 4.0 kW each...
    Комбинированные станки, Подержанных
    Mercator
  • Brushing machine Italmeccanica Polywood 2t Second hand 2002, C288
    Italmeccanica Polywood 2T
    Workable dimensions: Max. width 1300 mm Brushes: Ø 250 mm with rev counter COMPOSITION: 02 input side brushes 01 transversal brush assembly...
    щеточные машины, Подержанных
    Mercator
  • Brushing machine Italmeccanica Mec power 4t Second hand 2002, C287
    Italmeccanica MEC POWER 4T
    Workable dimensions: Max. width 1300 mm Installed power: 17 Kw COMPOSITION: 02 input side brushes - Ø 250 mm 02 horizontal brushes - Ø 400...
    щеточные машины, Подержанных
    Mercator
  • Profiling machine Scm Kontur Second hand 2005
    SCM Kontur
    TECHNICAL DATA: 01 Vertical profiling group - h 620 mm electronically controlled vert./horiz. 01 Vertical profiling group - h 620 mm...
    Четырехсторонник, Подержанных
    Mercator
  • Machining center Scm Windor 60 Second hand 2005
    SCM Windor 60
    TECHNICAL DATA: Composition: Tenoning area 02 Vertical tenoning groups - h 620 mm electronically controlled vert./horiz. 01 Saw group 01...
    Обрабатывающие центры с ЧПУ, Подержанных
    Mercator
  • Wood shredder Por Magnum Second hand 2001
    Por Magnum
    TECHNICAL DATA: Loading mouth size mm: 1000 x 720 Installed power KW: 18.5 Voltage: 380 Volts Hourly production: 300 kg Screen...
    Дробилки древесные, Подержанных
    Mercator
  • Automatic profile sander Tagliabue LB1, used, C218
    Tagliabue LB1
    TECHNICAL DATA: Groups 04: - 01 fixed positioning - 03 adjustable/oscillating Max workable thickness mm: 100 Adjustable sanding speed...
    кромкошлифовальные станки, Подержанных
    Mercator
  • Tagliabue TAG 11 calibrating sander
    Tagliabue TAG 11 CE DESTRA
    Working width mm: 1350 Size of the abrasive belts mm: 2620 x 1300 Configuration: I. Iron roller diameter 300 mm II. Rigid rubber roller...
    Ленточно-шлифовальные станки, Подержанных
    Mercator
  • Sliding table saw Lazzari Edra 3800 Second hand 2000
    Lazzari Edra 3800
    Max blade diameter mm: 400 Motorized blade inclination: 0° - 45° Undercarriage length mm: 3800 Installed power: 7.5 HP Engraver diameter...
    Форматно-раскроечные - Циркулярные станки, Подержанных
    Mercator
  • Copy shaper machine Bacci Fc8 2500 Second hand 1996
    Bacci FC8 2500
    TECHNICAL DATA: Working length: max. 2500 mm Working width: max. 350-900mm COMPOSITION: I group: Right-left cutter (2 x 11 Kw) II group...
    Копировально-фрезерные станки, Подержанных
    Mercator
  • Boring and inserting machine Koch Windoor Second hand 2003
    Koch Windoor
    Workpiece length mm: 200 - 3000 Workpiece width mm: 20 - 200 Workpiece thickness mm: 30 - 120 Right stop length mm: 1500 HORIZONTAL DRILLING...
    Шкантозабивной машины, Подержанных
    Mercator
  • Centro di lavoro per finestre CMS Pro Evolution, usato, C549
    CMS Pro Evolution
    DATI TECNICI: 02 motori: TX3 - 3 assi dotato di attacco HSK63E - magazzino a catena 46 slot TX5 - 5 assi (C ±270°, B ±120°) dotato di attacco...
    Обрабатывающие центры с ЧПУ, Подержанных
    Mercator

Страницы