Automatic loading panel saw BIESSE SELCO EBTR 120 Twin Pusher

работа: 
Biesse selco
модель: 
Ebtr 120 twin pusher
Описание: 

SELCO panel saw
TYPE EBTR 120 Twin Pusher - 5600 x 2200 mm
Automatic loading panel saw BIESSE SELCO EBTR 120 Twin Pusher

RIf : C3085

Numerical panel saw, with two independent automatic loading stations and electromechanical precision lifting table

Principal technical characteristics

Max cutting length : 5600 mm
Max auxiliar pusher course : 4300 mm
Max blade height from table level : 122 mm
Max clamps opening : 110 mm
Lifting table with direct loading : 5600 x 2200 mm
Min panel dimension on loading position : 2440 x 1220 mm Min panel thickness from loading table : 10 mm

Main blade motor 18,5 kW / 50Hz (25 Hp)

Incisor blade motor 2,2 kW / 50 Hz (3 Hp)

Brushless motor for blade chariot - Speed 1 -150 m/min

Brushless motor for main pusher – Max speed 100 m/min

2 back rollers lateral alignment device with automatic positioning (60 mm to 2200 mm)

Turning platform for automatic pre-cuts with 4 pile blocking device Auxiliar pusher TWIN PUSHER
Main blade Ø 430 mm
Incisor blade Ø 200 mm

4 pneumatical clamps with independent lifting in the transversal area for main pusher (placed at 70, 180, 390, 600 mm from the squaring line)

4 pneumatical clamps with independent lifting in the longitudinal area for main pusher (placed at 2235, 3845, 4650, 5450 mm from the squaring line)

4 pneumatical clamps with independent lifting in the auxiliar pusher (placed at 70, 180, 390, 600 mm from the squaring line)

Air cushion rounded work plan 2050 x 850 mm for width optimization placement allowing simultaneous transversal cutting of several bands

4 air cushion tables
4 front transversal pre-aligning devices direct on the pile turning station 2 front and longitudinal pile aligning devices after the rotation
Lifting loading table

Auxiliar pusher for simultaneous different cutting phases, synchronized with main pusher

The 2 pusher are managed by a software, which depending on the cutting instructions, selects the clamps of different pushers so that the insertion in the cutting zone is optimized to realize as many simultaneous cuts as possible

The auxiliar pusher has 4 independent clamps and can be equipped with a fifth one (option).

Automatic cut panels evacuation
Heavy single structure, Industrial chassis, strong stability

Cemented and calibrated chariot guiding rails, which supports the main blade and the incisor blade

Les 2 pousseurs sont gérés par un logiciel qui, en fonction du schéma de découpe et des phases d'usinage nécessaires, sélectionne les pinces des divers pousseurs à Insérer dans la zone d'usinage afin de réaliser le plus grand nombre possible de cycles de découpe simultanés. Expulsion automatique des panneaux coupés

Pressor group
Lateral alignment group with 2 independent rollers

The turning station has a lifting platform turning the panel pile at 90° which is held in place with blocking devices. The pile is then aligned by the front devices

When the pre-cutting cycle is over the main part of the pile is returned again at 90° on the turning station, and the pre-cut part is sent to the transversal cutting operation

PC Windows XP, 17" screen

With cutting profiles, lists, manual cutting, simulation, diagnostic, online help, maintenance, statistics and settings

Software and applicancies:

"OPTIPLANNING" Pro Version software :

Great number of cutting lists (including different types of material) allowing “all at once” optimization

"IMPORT FILE" function
Editing on external device and import files on machine PC. Automatic management of panel piles and waste material

Panel stock and scrap debris function

"QUICK OPTI" software
Cutting schematics optimization

Electronic label printer with PEELING option

Complementary equipment:

"QUICK CHANGE" device
For rapid and secure replacement of the main blade and the incisor blade

"DIGISET" function
For the electronic vertical and horizontal alignment of the incisor blade with the main blade (directly on PC command)

SECOND rubber roller
For lateral alignment device

ADDITIONL PNEUMATICAL CLAMP for vertical 90° displacement

5th ADDITIONAL CLAMP for auxiliary pusher positioned at 810 mm from the squaring line

START CYCLE PUSHER distance command including the emergency pusher. Positioned near the second air cushion

"P.FS." Function for transversal cutting (POST-FORMING)

ADVANCED WORKING STATION
"Macro" function : groove making inside a program

MOTORIZED CONVEYOR at lifting table entry RIGHT LATERAL LOADING on lifting table MOTORIZED ROLLERS ON LIFTING TABLE

Dust extraction :

1 principal opening 200 mm
2 above openings on the cutting line 100 mm
1 above opening at the extremity of the pressor 150 mm Needed suction debit 7000 m3/h
Pneumatical infeed : 260 L/min; 8 bars
INVERTER ON LIFTING TABLE for rapid descent

Контакты

Связаться с продавцом

CAPTCHA
Пожалуйста, подтвердите, что вы не робот. Чтобы предотвратить автоматическую отправку спама.

Вертикальные вкладки