Masini prelucrarea lemnului de - MDD Adrian Fusiarz

  • Stromab TR600
    * dimensions of shelves 220 x 90 cm * clean, straight, unbent shelves and no dents * shelf clearance - 50 cm * 6 pressure pistons with a diameter...
    8500.00 €
    Centre debitare panouri masive, uzate
    maszynymdd
  • CB 2NRT1320
    * working width 190 mm * working height 120 mm * vertical heads on one engine with a power of 5.5 kW * horizontal heads on one engine with a power...
    12500.00 €
    Maşini de calibrat, uzate
    maszynymdd
  • Italmeccanica Profilwood
    * dimensions of shelves 300 x 130 cm * shelves clean, straight, not bent and no dents, I would say perfect condition * water-heated shelves with...
    4500.00 €
    Maşini de periat, uzate
    maszynymdd
  • S.Giorgio 350x130
    Below are some useful information about the feed: * 3 pull rollers * forward / reverse rotation * speed control on the switch and additional...
    9500.00 €
    Prese, uzate
    maszynymdd
  • Ceccato DRM 50
    The basic parameters of this compressor are: * capacity 6120 l / min at a maximum pressure of 8.5 bar * main engine power 37 kW (50 HP) *...
    6000.00 €
    Compresoare, Noi
    maszynymdd
  • Hemag coroprofil 32
    * working width 11,000 mm * max working height 160 mm * 3 grinding aggregates: - the first steel shaft for calibration with a diameter of 230 mm...
    18000.00 €
    Maşini rindeluit 4 feţe, uzate
    maszynymdd
  • Paoloni Fimal PF535A
    - saw blade diameter - currently 250 mm, maximum 400 mm - shaft with a diameter of 30 mm - disc lowered at an angle, up to 45 degrees - dial...
    7200.00 €
    Maşini de indreptat abricht, uzate
    maszynymdd
  • Samco Unilev 15
    * belt width 150 mm * adjustable shoe for sanding veneers on one side and "back" 13x76 cm on the other * table with an attachment for grinding...
    1500.00 €
    Maşini de slefuit canturi, uzate
    maszynymdd
  • Casolin PF530
    * max working width - 300 mm * max working height - 250 mm * minimum element length - 250 mm * 2 brush units with a diameter of 210 mm - the...
    5000.00 €
    Maşini de indreptat abricht, uzate
    maszynymdd
  • SCM f520 nova
    * working width 970 mm * max working height 160 mm * 2 grinding aggregates - the first aggregate equipped with two shafts, hard and soft with the...
    7200.00 €
    Maşini de indreptat abricht, uzate
    maszynymdd
  • Casadei Shark 8pi
    * inner diameter barrel and briquette 70 mm * 7.5 kW motor * sawdust tank with a volume of about 0.9 m3 and a diameter of 100 cm * regulation of...
    4500.00 €
    Circulare de croit, uzate
    maszynymdd
  • : Paoloni FIMAL_PF530N_Surface planer
    * working width 530 mm * top length 3000 mm * length of the introductory tabletop 1800 mm * culaga adjustable at an angle of dim. 175x1500mm * man...
    5 000,00
    ,
    maszynymdd
  • Atlas Copco G7FF
    * capacity 984 l / min * main engine power 7.5 kW * 500 l tank * maximum operating pressure 10.0 atm * built-in refrigerant dryer * electronic...
    5200.00 €
    Compresoare, Noi
    maszynymdd
  • Atlas Copco G5FF
    * working width 230 mm * working height 125 mm * vertical heads on one engine with a power of 7.5 kW * horizontal heads on separate motors with a...
    4500.00 €
    Compresoare, Noi
    maszynymdd