PRIMA SPRAY MACHINE BY CEFLA
3,500 mm (137.7") maximum part length
305 mm (12") minimum part length
1,300 mm (51.1") maximum part width
19 mm (0.7") minimum part width
100 mm (3.9") maximum part thickness
6 mm (0.2") minimum part thickness
10 mm (0.4") maximum part bow
Oscillating spray system with one (1) arm
Enclosed cabin with side glass access doors
An in-feed reading system optimising the spraying width by means of scanning barrier 68 photodiodes.
Working width 1300 mm (51.1")
Vacuum belt conveying system with a continuous, disposable paper belt.
Paper tension is controlled by a pneumatic system.
Easily removable paper spools
Ambient air inlet from the machine roof.
Overspray exhaust through double downdraft filtration dry filters, placed at conveyor sides and mounted on an extractable tank.
Spraying axis driven by a brushless motor and a timing belt with ball bearings
Predisposition for four (4) guns mounts max (guns and pumps excluded)
Four high-pressure coating feeding circuits with recirculation and a coating filter with stainless steel fittings.
(3 Colors + 1 Solvent)
Manual valves for colour change
Minimum workpiece length, 250 mm - 10’’
Conveyor speed, adjustable by means of inverter, 1-3 m/min 3’to 10’ ft/Min.
Maximum speed of guns holding units, 140 m/min - 450’ ft/Min
Drive motor power (flameproof execution), 0.5 HP.
Guns handling system motor power, 3 HP
Suction motor power, 5.5 HP
Air mixed up with solvents exhausted outside, 8000 mc/h - 4700 CFM
Air to be made up in the room, 8000 mm - 4700 CFM
Paper width, 1520 mm - 5’
Paper spool max diameter, 550 mm - 1’ – 9’’
Installed electric power (complementary equip.: excluded), 10 HP
Electronic control unit with PLC and software for machine management.
Main control cabinet, placed at the machine infeed, along the service side, complete with cable and wiring system for connection to all the users.
Spraying parameters managed by PLC with:
Working programs set up.
Black/white “touch” display, for diagnostic and control
Possibility to exchange data USB memory stick
ATEX 2G execution, with explosion-proof motors
Driven infeed/outfeed tiltable roller sections, 38" length
Manual on flash drive
- Italy
- uzate
