CONTROL SYSTEM
• Adjustable hanging command board to control the machine
• Incorporated electrical cabinet
TECHNICAL FEATURES
• Panel working height with straight edge (min/max): 10 - 60 mm
• Edge thickness in coils (min/max): 0.4-3 mm
• Track feeding speed: 14 m/min in arrotondatura - 20 m/min in refilatura
PANEL INTRODUCTION AND FEEDING SYSTEM
• Slide driving chain
• Top pressure with idler rollers in double row
• Top pressure with electronic positioning controlled by NC
• Incoming panel separator with capacitive sensor
• Lateral panel support with aluminum track complete with supporting wheels
SQUARING UNITS
• In-feed pre-milling unit FI-701 with AUTO-SET for automatic centering of the tool relative to the panel. It is composed by nr. 2 motors with automatic timer intervention to avoid splinters on the panel.
GLUING UNIT, LOADING AND EDGE PRESSURE
• Anti-adhesive unit ADZ-700 to allow the optimum cleaning of the workpiece on the upper and lower surface of the panel
• Infrared lamp IRL-700
• Gluing unit VC-710 with TEKNO GLUE system For optimal gluing in all working conditions
• Disk coil holder
• Glue tank for EVA glue – glue tank for hot melt glue
• Pre-melting system QM-703 for hot melt glue
• Guillotine to cut the edge in rolls with automatic regulation of the shear pressure
• Edge pressure roller with timed rollers on straight profile - Nr. 1 + 2 pressure rollers with positioning controlled by CNC with revolver with nr. 4 positions
EDGEBANDING UNIT
• End trimming unit IN-801 to cut the excess edge on the front and rear of the panel.
Pneumatic tilting nr. 4 positions with pre-selection from control panel of cutting angle.
FLEX system for edge trimming with controlled overhang: which allows the cutting position of the blades to be adjusted from the control panel to achieve a predefined edge overhang.
• Fine trimming unit RI-701 with NC positioning for trimming and chamfering of the excess edge on top and bottom of the panel – The unit is tiltable from 0°to 25° – FAST-RI system with nr. 2 working positions
• Rounding unit with nr. 2 motors CR-202 for automatic edge corners rounding on top and bottom of the panel - Complete with with nr. 2 positions Fast system preselectable by numerical control
• Edge scraping unit RBK 502 to eliminate imperfections resulting from previous machining on the top and bottom of the edge - Complete of chip collection box
• Glue scraping unit RC700 for the removal of excess glue from the join between edge and panel
• Overlaid Brushing unit SP-700 with nr. 2 motors for cleaning and polishing the rounded edge
NORM AND OPTIONAL FOR SECURITY
• Copy of original EC Declaration of Conformity
• Protection and sound-proof cabin of the working units
• Suction system on the top of the protection cabin
- Italy
- uzate
