Деревообрабатывающие станки из - - pag 86

  • Giardina Baby roller coating machine
    Giardina G95/05
    Giardina Baby roller coating machine Model: G95/05 Year of manufacture: 1999 Machine compliant with CE standards belt conveyor managed by...
    Покрасочные камеры, Подержанных
    Bernasconi
  • Cefla PRI-NIR/TMV13 oven pre-heating second hand
    CEFLA PRI-NIR/TMV13
    Cefla oven pre-heating Model: PRI-NIR/TMV13 Width: 1400mm Transport by ceramic rollers NIR lamps Total installed power: 16.2Kw...
    Покрасочные камеры, Подержанных
    Bernasconi
  • Cefla complete line for glass
    CEFLA Cefla
    Useful width: 1600mm; Year of manufacture: 2007. The line is as follows: _ AUTOMATIC LOADER WITH TILTING ARM EQUIPPED WITH SUCTION CUPS with...
    Покрасочные камеры, Подержанных
    Bernasconi
  • Giardina conveyor shuttle bench on wheels
    GIARDINA Giardina
    Giardina conveyor shuttle bench on wheels Shuttle with protection system Length: 5100mm
    Покрасочные камеры, Подержанных
    Bernasconi
  • Giardina roller coating machine
    Giardina Giardina
    Giardina roller coating machine.equipped by 1 roller.
    Покрасочные камеры, Подержанных
    Bernasconi
  • MTA air drying compressor
    MTA MG 060/A
    MTA air drying compressor. Model: MG 060/A. Year of manufacture: 2010. Total installed power: 8.9Kw.
    Компрессоры, Подержанных
    Bernasconi
  • Giardina UV oven GST UV 601/1
    GIARDINA GST UV 601/1
    Model: GST UV 601/1. Useful width: 600mm. Almost new Kevlar belt. Total installed power: 11.5Kw. Year of manufacture: 1999. Machine...
    Покрасочные камеры, Подержанных
    Bernasconi
  • Cefla 600mm 4-lamp UV oven with chrome bar transport
    Cefla TLF M1/IF/600 TLFM1 TLFB2/IC/600
    Cefla UV oven with 1 inclined lamp group for drying edges. Second group with 2 inclined lamps for flat and edges. Lower lamp group. Chromed...
    Покрасочные камеры, Подержанных
    Bernasconi
  • Universal drill wu 4 Gomad lignum
    Universal drill wu 4 Gomad lignum Universal drill wu 4 Gomad lignum
    Drilling machine gromad automatic 4 units two rear and two bottom. Working length is 2500 mm. The machine is in perfect condition. It is great for...
    Шкантозабивной машины, Подержанных
    Lignum_Machines
  • Jaroma spindle moulder with replaceable arbor lignum
    Jaroma spindle moulder with replaceable arbor Jaroma spindle moulder with replaceable arbor
    Jaroma spindle moulder with replaceable arbor Jaroma spindle moulder, with replaceable arbor. Machine after major overhaul. Mechanics and electrics...
    Фрезерный станок по дереву, Подержанных
    Lignum_Machines
  • Used painting shelvings year 1999
    carrello CV
    Used painting shelvings year 1999
    Покрасочные камеры, Подержанных
    bipiemme
  • Used boiler Biasi & C. spa
    Biasi & C. Spa c12
    Used boiler Biasi & C. spa Kcal/h 1,200,000 Max operating pressure ATE 5
    Генераторы горячего воздуха, Подержанных
    bipiemme
  • Continuous cycle pressing line Colombo R.
    Colombo R. lp
    5500 x 1400 mm - steel planes drilled from solid - 8 thrust pistons with: OMMA 4-roller gluer motorized disc conveyor loading preparation...
    Прессовое оборудование, Подержанных
    bipiemme
  • Celaschi double automatic squaring machine
    Celaschi DX SX 5
    Equipped with 5 + 5 groups special machine equipped for head tenoning of the piece with anti-splinter transversal package loading...
    Форматно-раскроечные - Циркулярные станки, Подержанных
    bipiemme
  • Beam saw Selco Eb 90 Second hand 1999
    SELCO EB 90
    Blade protrusion mm 85 Beam saw Selco Eb 90 Second hand 1999
    Раскроечные центры с ЧПУ, Подержанных
    bipiemme
  • Used BIGON DRY Sterilizer Dryer
    BIGON DRY LEMHT - GD 72.68.34
    m3 internal 30 Dimensions mm 7,200 x 5,000 x 3,500 H
    Камера вакуумной сушки древесины, Подержанных
    bipiemme
  • Used silo HP 40 - 28 hoses
    Silo Silo
    Automatic shaker - 28 hoses - capacity 80 m3 40 HP - chain cutter with extractor on the bottom of the silo for sawdust discharge impeller...
    Системы аспирации, Подержанных
    bipiemme
  • Wide belt sander Dmc Technosad 1350 Second hand
    DMC TECHNOSAD 1350
    Calibrating Sander brand DMC Mod. TECHNOSAD 1350 Complete with 1- Steel roller calibrating group 2- Rubber roller sanding group  55 SH 3...
    Калибровальные станки, Подержанных
    LEGNOMAC
  • Surface planer Scm F520 Second hand Ce
    Scm F520
    Surface planer Scm F520 Second hand Ce
    Фуговальный станок, Подержанных
    Locori Macchine Legno
  • New Lignum multi-spindle heads for drilling machines
    New Lignum multi-spindle heads for drilling machines New Lignum multi-spindle heads for drilling machines
    New Lignum multi-spindle heads for drilling machines.For every machines multidriliing 
    Сверлильно-присадочные, Новые
    Lignum_Machines
  • FESTOOL FUSION TEC sanding pad
    FESTOOL FUSION TEC
    FESTOOL FUSION TEC sanding pad CODE 202458 202459 202460 202461 202462 201463
    45.00 €
    Разнообразный, Новые
    Locori Macchine Legno
  • Motorized feeder for double-shaft multi-blade saw
    introduttore motorizzato
    Motorized feeder for double-shaft multi-blade saw: - length approximately 5.5 m, width of roller conveyors 550 mm - variable speed of rollers...
    Многопильный станок дисковый, Подержанных
    Baldin
  • MEBER 800 CE Band Saw second hand
    MEBER 800
    MEBER steel band saw model 800: - with 800mm solid flywheels - motor kw 4 / hp 5.5, volt 380 Machine to CE standards
    Ленточнопильные вертикальные, Подержанных
    Baldin
  • DMO motorized roller conveyor for edge banding machine
    DMO .
    DMO motorized roller conveyor to help extract panels from single-sided edge banding machine (or other tracked machine). CE compliant machine
    Кромкооблицовочные станки, Подержанных
    Baldin
  • PRIMULTINI spindle moulder with lateral carriage
    PRIMULTINI .
    PRIMULTINI cast iron spindle moulder with: - lateral carriage for tenoning, on pole and with flag support, with tilting guide and useful stroke of...
    Фрезерный станок по дереву, Подержанных
    Baldin
  • PRIMULTINI 4.60 sharpener for saw blades
    PRIMULTINI 4.60
    PRIMULTINI sharpener model 4.60 with 3 motors: – for blades with widths from 60 to 260mm – sharpening for straight, inclined, spaced teeth – blade...
    Аточные станки, Подержанных
    Baldin
  • PRIMULTINI rounding machine for log saw blades
    PRIMULTINI bombatrice
    PRIMULTINI bandsaw blades bombatrice, complete with bench Not CE compliant, for export
    Аточные станки, Подержанных
    Baldin
  • Used PADE 1000/N head-milling-drilling machine
    PADE 1000/N
    PADE 1000/N end milling-milling-drilling machine: - automatic sliding work table - D.400mm end milling blade, 3 hp motor - milling machine...
    фрезерные станки по дереву, Подержанных
    Baldin
  • ALBERTI POLAR EVOLUTION 3.5 CN 5-axis machining center
    ALBERTI POLAR EVOLUTION 3,5 CN
    ALBERTI 5-axis machining center model POLAR EVOLUTION 3.5 CN: – maximum working range 3500 x 1637 mm – Z-axis stroke 600 mm, workable thickness...
    Обрабатывающие центры с ЧПУ, Подержанных
    Baldin
  • SCM RECORD 220 4-axis machining center
    SCM RECORD 220
    SCM RECORD 220 model work center: - useful axis stroke 3250 x 1300 x 300 mm - useful piece passage 320 mm - multifunctional work table 3180...
    Обрабатывающие центры с ЧПУ, Подержанных
    Baldin
  • Moulder Scm Superset 23 Second hand
    SCM SUPERSET 23
    SCM SUPERSET 23 5-shaft moulder: - useful working dimensions 230x120mm - Alfasistel electronic control for programming 2 axes - cardan drive...
    Четырехсторонний станок, Подержанных
    Baldin
  • Used ORMA I/413 disc gluer and conveyor
    ORMA I/413
    ORMA CE compliant disc gluing machine and conveyor: 4-roller gluing machine model I/413 with: - useful working width 1300mm - useful working...
    Клеенаносящий станок, Подержанных
    Baldin
  • Chain mortiser Muti Oms 4mm Second hand
    MUTI OMS 4MM
    Chain and bit mortiser MUTI model OMS 4MM for locks: Vertical group with chain, 3 hp motor Vertical group with 2 bits, 0.75 hp motor Horizontal...
    Фрезерно-копировальный станок, Подержанных
    Baldin
  • Used CURSAL TRSI8000 OL700 series cutting line
    CURSAL TRSI8000 OL700
    CURSAL TRSI8000 OL700 series cutting line composed of: - automatic loader with 1 column and 3 vacuum suction cups - 6-chain horizontal feeder...
    Торцовочные пилы, Подержанных
    Baldin
  • Wide belt sander Bütfering Sko 113 c Second hand 2011
    Bütfering SKO 113 C
    Working width: 1350 mm Abrasive belt width: 1370 mm Abrasive belt length: 1900 mm Steel roller: Ø 150 mm Working thickness: max. 150 mm Total...
    Калибровальные станки, Подержанных
    Mercator
  • Spindle moulding machine Scm T150 Second hand 1999
    SCM T150
    Shaft: Ø 35 mm Shaft inclination: from -10 to 45 Shaft height adjustment Rotation direction adjustment Adjustable speed from 3000 to 10000...
    Фрезерный станок по дереву, Подержанных
    Mercator
  • Salvador lower mitre saw used
    Salvador -
    Salvador lower mitre saw used
    Торцовочные пилы, Подержанных
    LEGNOMAC
  • Weinig moulder with 8 motors
    Weinig 8 m
    Weinig moulder with 8 motors Complete with loader and automatic insertion FRIULMAC
    Четырехсторонний станок, Подержанных
    LEGNOMAC
  • Used CNC Vertical Working Center Biesse Brema EKO 2.2
    Biesse Brema EKO 2.2
    Panel length: 200 - 3200 mm; Panel width: 35 - 1250 mm; Panel thickness: 8 - 60 mm; Worktop with counter-pressure system; Clamps with...
    Обрабатывающие центры с ЧПУ, Подержанных
    Danjtec
  • Edgebander Holz-her Contriga 1366 Second hand 2013
    holz-her contriga 1366
    Workable panel thickness 60 mm Edge thickness in rolls 3 mm Upper belt pressure device Feed speed 22 m/min Automatic infeed guide Anti-adhesive...
    Кромкооблицовочные станки, Подержанных
    Danjtec
  • Used 5 Axis Working Centre Morbidelli Author X5
    SCM Morbidelli Author X5
    - Working area 3.050 x 1.455 mm - Working thickness 250 mm - N. 1 E/spindle 5 Axis HSK - 12 position chain tool change - N. 13 vertical spindles...
    Обрабатывающие центры с ЧПУ, Подержанных
    Danjtec
  • Machining center Cnc Masterwood MW 15.38 M5
    masterwood mw 15.38 m5
    Cnc masterwood mod. MW15.38 M5 5 axis CE
    Обрабатывающие центры с ЧПУ, Подержанных
    Lenimac
  • Wide belt sander Costa 80 Second hand
    costa 80
    Calibrator Costa mod. 80 Working width mm 1350 2 belts 1st belt with steel roller 2nd belt with hard rubber roller Pressure shoes...
    Калибровальные станки, Подержанных
    Lenimac
  • Wide belt sander Steton Ctl 2/970 Second hand
    steton ctl 2/970
    Steton calibrator mod. Ctl 2/970 Width mm 950 Nastri 2 Rullo + stamp
    Калибровальные станки, Подержанных
    Lenimac
  • Wide belt sander Scm Sandya 7 Second hand 2002
    scm sandya 7
    Calibrating machine Scm mod. Sandya 7 CE standards Working width mm 1150 Belts 2 First belt with steel roller Second belt with rubber...
    Калибровальные станки, Подержанных
    Lenimac
  • Work center SCM RECORD 240 NT PRISMA
    SCM RECORD 240 NT
    Work center SCM RECORD 240 NT PRISMA5700X1560X600 mm5 axleboring headNESTING TABLE
    Обрабатывающие центры с ЧПУ, Подержанных
    MANTOVANI MACCHINE SRL
  • Work center SCM RECORD 240 5 AXLE
    SCM RECORD 240
    WORK CENTER SCM RECORD 240 NESTING3500X1650X1805 AXLEBORING HEADCHANGE TOOLS
    Обрабатывающие центры с ЧПУ, Подержанных
    MANTOVANI MACCHINE SRL
  • Radial OMGA 700/5 second hand
    OMGA RADIAL 700/5
    Radial arm saw OMGA 700/5 CE 700 MM SAW D. 300 MM special long spindle for tools HP 5.5 380V
    Радиально-консольные пилы, Подержанных
    MANTOVANI MACCHINE SRL
  • Spraying painting machine FALCIONI UNOSPRAY
    FALCIONI UNOSPRAY
    The transport consists of a continuous carbon fiber belt (cfb), which allows the recovery of the product overspray for its reuse. this allows: high...
    Покрасочные камеры, Подержанных
    MANTOVANI MACCHINE SRL
  • Sanding machine SCM DMC TECHNOSAND K CE
    SCM DMC TECHNOSAND K CE
    WHIDT: 13501ST GROUP: IRON ROLL2ND GROUP: COMBINED ROLL/PAD3RD GROUP: NOSANDING MACHINE SCM DMC TECHNOSAND K2 BELTS - ROLL+ COMBINED ROLL/PAD1350 MM...
    Калибровальные станки, Подержанных
    MANTOVANI MACCHINE SRL
  • Woodturning lathe CENTAURO T5 1600 CE
    CENTAURO T5 1600 CE
    Max. distance between the tips 1600 mm Height of tips on the bed 250 mm Max. turning and milling diameter 250 mm Diameter allowed...
    Токарные станки по дереву, Подержанных
    MANTOVANI MACCHINE SRL
  • Work center BACCI MASTER 5 axis
    BACCI MASTER
    Work center BACCI MASTER 5 AXLES boring unit
    Обрабатывающие центры с ЧПУ, Подержанных
    MANTOVANI MACCHINE SRL
  • Sanding machine VIET CHALLENGE S1 211 CE
    VIET CHALLENGE S1 211 CE
    WIDTH: 1100 1ST GROUP: ROLL 85 sh 2ND GROUP: ROLL 40 SH POWER: 15 HP SANDING MACHINE VIET CHALLENGE S1 211 2 BELTS - ROLL+ ROLL - d. 200+200...
    Калибровальные станки, Подержанных
    MANTOVANI MACCHINE SRL
  • Thicknessing machine SCM FORMULA SP1
    SCM FORMULA SP1
    THICKNESSING MACHINE SCM FORMULA SP1 CE 520 X 270 MM 5.5 HP 4 STANDARD KNIVES
    Рейсмусовые станки, Подержанных
    MANTOVANI MACCHINE SRL

Страницы