Single side edge bander IMA ADVANTAGE 6600

Marcă: 
Ima
Model: 
Advantage 6600
Descriere: 

LMG012

 EDGE BANDER SINGLE SIDED.  
GENERAL SPECIFICATIONS  
► Industrial machine with heavy-duty structure  
► Applicable banding material in coils: thin edge and PVC up to 3 mm  
► Applicable banding material in strips: solid wood up to  20 mm  
SYSTEM AND OPTIONALS OF THE PANEL HANDLING  
► Running driving chain  
► Top pression unit made by motorized rubbered belt  
► Top pression unit with adjustable height in automatic by numerical control  
► Input panel guide  is motorized and with adjusting in automatic by numerical control  
► Lateral bar with lines of idle wheels to support the panels  
WORKING UNITS ON THE SQUARING SIDE  
► Anti-gluing unit made by 2 guns that spray liquid on the top and bottom part of the panel  
► Pre milling unit to rectify the side of the panel. It is made by 2 motors with automatic in/out intervention to avoid splinters on the panel - motors power 3 KW ( 12000 RPM)  
► Lamp zone to pre-heat the side of the panel  
► Support for edge coil  
► Multiple magazine for edge coils with nr.   2 positions, to automatically change the edge type   
► Hot-melt glue pot   
► Spreading roller to regulate the quantity of apllied glue  
► Guillotine to cut the edge in coils  
► Roller set to press the edge on straight profiles - nr.  1 + 5 pression rollers  - motorized regulation of depth position in automatic by numerical control  
WORKING UNITS ON THE EDGE BANDING  SIDE  
► End cutting unit with 2 motors to cut the excess edge on the front and back part of the panel - motors tiltable 0 /  10 degree - motors power 0.66 KW ( 11100 RPM)  
► Fine trimming unit to trim and round off the excess edge on the top and bottom part of the panel - motors tiltable 0 /  30 degree - regulation of the tilting by hand with visual unit   
► Rounding unit multifunction  with regulation in automatic by numerical control. This unit has a double functions: A) to trim and round off the excess edge B) to round the edge corners on the top and bottom part of the panel - motors power 0.66 KW ( 11200 RPM)  
► Edge scraping unit for the edge superfinishing    
► Glue scraping unit to remove the excess glue from the join between edge and panel  
► Brushing unit with  2 motors to clean and polish the upper and lower edge    
► Superfinishing unit with spheres to finish and reactevate the colour on edges of plastic material  
► Brushing unit with  2 motors to clean and polish the rounded edge    
CONTROL OF THE MACHINE AND ACCESSORIES  
► Control and program system  IMATRONIC with the following features: - screen colour - visual display - keyboard  
► Command board installed on an incorporated electrical cabinet to control the machine   
► Incorporated electrical cabinet  
NORM AND OPTIONAL FOR THE SECURITY  
► Security norme CE mark  
► Safety and sound-proof enclosure  cabinet of the working units   
► Aspiration system on the top part of the safety enclosure  cabinet  

 

Contact

Ferwood srl
FERWOOD SRL
ITALY
Pollenzo
+39 0172 474073

trimite e-mail autorului

CAPTCHA
Vă rugăm să confirmați că nu sunteți un robot. Pentru a preveni depuneri automate de spam.

Taburi verticale