PRODUCT CODE: RI1270 - 1749
OM DI 30 C Professional Diesel Forklift
The OM professional diesel forklift, model DI 30 C, is a robust and...
Wózki widłowe, używane
PRODUCT CODE: AL1266 - 1745
Ceccato Fomocompact Woodworking Compressor (Year 2007)
The Ceccato Fomocompact woodworking compressor, model 2007,...
Sprężarki, używane
swinging crosscut saw lignum
swinging circular crosscut saw with table guards approved. Factory not self-made
Piły ramieniowe - Radialne, używane
hydraulic lift famad paczków 1.5 tons
HYDRAULIC STATIONARY LIFT DHP - 1.5t
The DHP hydraulic stationary lift is used for stepless lifting and...
Stoły podnośnikowe, używane
I sell the horizontal wood shredder DI Mechanik SDOP 400/3,
Made in Slovakia
Year 2004
Cylinder system with 3 knives.
400x150mm input in...
Rębaki do drewna, używane
I sell the wood shredder LAIMET LS-21/E,
Year 2017
Spiral system, very quiet.
315x210mm input in the shredder
Motor 30KW
Leistung Zirka...
Rębaki do drewna, używane
I sell the 4-lamp UV-drying tunnel Cefla UV-R M4/3500
Year 2011
Working width 1400mm.
Total length 3,70m
Total power 71,55 kW
Very good...
Linie lakiernicze do drewna, używane
I sell the 2-head 2-lamp UV-drying tunnel Cefla TLE/B/2+TTE 2500
Year 2002
Working width 1400mm.
Total length 2,50m
2 Lamps HG 120 W + HG 120 W...
Linie lakiernicze do drewna, używane
I sell the 1-cylinder roller coater BURKLE SAL.
Working width 1300mm
Very good condition. Fully working.
Available immediately.
Linie lakiernicze do drewna, używane
I sell the 1-cylinder roller coater BURKLE SAS1300.
Working width 1300mm
Very good condition. Fully working.
Available immediately.
Linie lakiernicze do drewna, używane
Profiling machine for COSMA U9 Styles
Profiling from square timber
Minimum length of square timber 45 cm
Maximum length of square timber 400 cm...
Tokarki do drewna, używane
Visible in Cursal, combined with Cursal push feed saws series TRSI AP-OL of different modular sizes.
Suitable for loading packing boards (loading...
Piły Ukosowe, Nowe
I sell the band conveyor suitable for Industry use, for example wooden industry, material manipulation etc.
Total length 3,40m
Band width...
Stoły podnośnikowe, używane
I sell the set of 3pcs. Grecon Dimter belt conveyor suitable for Industry use, for example wooden industry, material manipulation etc.
Total...
Stoły podnośnikowe, używane
I sell the Finnrose bar conveyor suitable for Industry use, for example wooden industry, material manipulation etc.
Total length 4,20m
Band...
Stoły podnośnikowe, używane
I sell the band conveyor suitable for Industry use, for example wooden industry, material manipulation etc.
Total length 2,90m
Band width...
Stoły podnośnikowe, używane
I sell the bar conveyor suitable for Industry use, for example wooden industry, material manipulation etc.
Brand: CEFLA
Model: TR3000/...
Stoły podnośnikowe, używane
I sell the throughfeed drilling machine Rilesa Rapid 1500, Year 2012.
Working width up to 1500mm
Configuration:
RAPID 2200:
1+1 motors from...
Wiercący i wbijający kołki, używane
Balestrini NOVA 3 Tenoning Machine
Main motors 2 x 2.2 kW
Spindle diameter 25 mm
Spindle length 70 mm
Connection diameter 2 x 100 mm
Automatic...
Frezarki do drewna, używane
I sell the fourside moulder Weinig POWERMAT 1000, year 2008
Feeding device Grasten Maskinservice
Working width 320mm
Working height 130mm
8...
Strugarki czterostronne, używane
I sell the widebelt sanding machine COSTA K CCC 1350, year 2004.
Configuration:
55 KW steel calibration cylinder
45 KW hard rubber...
Szlifierki szerokotaśmowe, używane
I sell the CNC drilling machine with inserting BIESSE COMIL INSIDER KT2. Year 2002.
2 pcs. CNC drilling heads from top.
1 pcs. Grooving saw
2 pcs...
Wiercący i wbijający kołki, używane
I sell the CNC drilling machine with inserting BIESSE COMIL INSIDER KTC. Year 2002.
2 pcs. CNC drilling heads from top.
1 pcs. Glue spraying head...
Wiercący i wbijający kołki, używane
I sell the CNC accessories inserting machine with glue spraying BIESSE COMIL INSIDER IT2G. Year 2001.
2 Stk. CNC drawers slidings inserting from top...
Wiercący i wbijający kołki, używane
I sell the CNC drilling machine with inserting BIESSE COMIL INSIDER KT2. Year 1999.
2 pcs. CNC drilling heads from top.
1 pcs. Grooving saw
3 pcs...
Wiercący i wbijający kołki, używane
I sell the side glue spreader Fischer Ruckle FLA,
Year 1994.
Suitable for solid wood glulam boards production.
Throughfeed with...
Nakładarki kleju, używane
I sell the wooden window assembly table OMGA BA825 (+A+U).
Year 2012
All complete. Very good condition.
Available immediately.
Stoły montażowe do ościeżnic i drzwi, używane
I sell the throughfeed drilling machine with HOMAG BST440/30/D.
Year 1997
Configuration:
4+4 motors from under
1+1 motors from sides per 24...
Wiertarki wielowrzecionowe, używane
I sell the automatic drilling machine KUSING.
Working width up to 1200mm
Magazine for elements
Configuration:
1+1 motors from sides
Atypic 2-...
Wiertarki wielowrzecionowe, używane
I sell the complete set of machines for production of wooden dowels.
Year: 1993 - 2008
Brusa di Garboli TA30
L.Loser AA200
Moulders
Cutting...
Profilarki, używane
Schroeder T20 double-sided tenoning machine
Schroeder double-sided tenoning machine, 6 heads per side. Top down, vertical down. The machine can make...
Maszyny do okien, używane
I sell the automatic optimising saw GreCon Dimter 2004, year 1992.
Input table automatic feeding / throughfeed system
Outut table
3 pcs....
Piły Ukosowe, używane
Head for a 4-sided planer h = 180 mm, 4 knives
Head for a 4-sided planer h = 180 mm, 4 knives. Diameter 125 mm, 4 knives, revolutions 6000 l/min,...
Grubościówki, używane
Raimann saw height 90 mm chain width 250 mm machine after regeneration completely renovated engine 22 kW cutting width 250 mm shaft diameter 80 mm...
Wielopiły, używane
4-TON FORKLIFT FOR GAS INSTALLATION, FORK TRANSPORT, VERY GOOD CONDITION
MILEAGE 15160 HOURS
4-TON FORKLIFT FOR GAS INSTALLATION...
Wózki widłowe, używane
Dmdk 35 pneumatic cross-cut saw
The DMDK-35 circular saw is used for cross-cutting wood. The maximum cutting width is 220 mm at a height of 35 mm....
Piły ramieniowe - Radialne, używane
Schleicher 3-unit drilling machine after lignum renovation
Schleicher 3-unit drilling machine after lignum renovation.
The machine is equipped...
Wiercący i wbijający kołki, używane
Boring and inserting machines Rilesa Vlg 2200 new 2023
Make:
Riles
Model:
Vlg 2200
Description:
Condition:
new
Year:
2023
Start...
Wiercący i wbijający kołki, Nowe
SBF model 3W-586 1100mm calibrator with 3 belts:
- 1st roller belt D=150mm in 90 shore rubber
- 2nd roller belt D=200mm in 65 shore rubber...
Szlifierki szerokotaśmowe, używane
MJX 120 multi-shaft saw
cutting height 120 mm cutting width 350 37 kW engine
Wielopiły, używane
HESS door handle for aluminum and PVC lignum windows
HESS drill and handle. Single unit with pneumatic clamps. For PVC and ALU windows.
Wiertarko dłutarki łańcuszkowe, używane
No. 4 angular heads + No. 4 toolholders - HSK63E
1) high speed angular head for horizontal tool
2) angular head for blade diameter 250 mm.
3)...
Centra obróbcze, używane
Gomad horizontal drilling machine type WU 1 lignum
Gomad horizontal drilling machine, one unit, horizontal drilling. Net price incl. Year of...
Wiertarki wielowrzecionowe, używane
I sell the double mitre saw OMGA TR2A.
Cutting length 390 - 3000mm
Cutting width max. 170mm
Cutting height max. 90mm
Tilting heads 0 + - 45...
Piły Ukosowe, używane
We sell this industrial Rip Saw/Edge saw to operations with a requirement for large-scale processing of lumber.
The machine is suitable for...
Piły do drewna litego, Nowe
I will sell this middle category of Rip saw / Edge saw KUSING RP-OP-600 3.0.
It is a machine suitable for smaller operations processing primarily...
Piły do drewna litego, Nowe
It is a profesional saw with one or two simultaneously digitally adjustable saw blades.
The control has a memory with 5 values for faster and...
Piły do drewna litego, Nowe
I sell the double end cutting and tenoning machine SCM CONCEPT NT.
Working width up to 3000mm
Configuration left side / fix:
1 pc. cutting saw...
Frezarki obwiedniowe, używane
PRODUCT CODE: R38-16-652
Vacuum cleaner for professional carpentry
Vacuum cleaner with 4 outdoor bags
Year 2000 (CE)
Characteristics...
Odciągi wiórów, używane
I sell the 3-axis CNC working centre HOLZ-HER ECO-MASTER 7113 with beam table
Year 2000.
Configuration:
3-axis main spindle 7,5 KW
Tool...
Centra obróbcze, używane
I sell the 3-axis CNC working centre HOLZ-HER PRO-MASTER 7023 with beam table
Year 2009.
Configuration:
3-axis main spindle 6 KW
Tool magazine...
Centra obróbcze, używane
I sell the format sliding table saw with scoring
Manufacutrer: FELDER
Model: K975
Year 2013
Cutting length 3200mm.
Cutting width 1350mm...
Piły formatowe - Tarczowe, używane
BAND SAW MMM-700 lignum
Parameter Unit Value
Technical data
Number of cutting systems set. 1
Horizontal clearance mm up to 600 - acc. orders...
Pilarki taśmowe poziome, używane
Rated voltage: 220V or 110V US 50-60Hz.
Cutting height: 300 mm
Diameter of guide wheel: 204 mm
Bandsaw length: 1710 mm
Bandsaw width: 6-...
Piły taśmowe, Nowe
