FINGERJOINTING MACHINE LINE AUTOMAT WITH PRESS AND TWO MILLING

Location

Gorzow Wielkopolski.
Conditions of delivery

Pick your own
Cost of delivery

Client cover
startup type

negotiated
Description
Comments

The dimensions of the raw material wsdowego
The length of the elements batch mm 170 ÷ 900
The amount of cutting mm 20 ÷ 155
The width of the package of workpieces 600 mm
Capable of milling tools with a length of 10 mm teeth (5, 15, 20 optional)

Duty cycle automatic with manual loading of the material
Air working pressure of 0.6 MPa
Compressed air requirement m3 / h approximately 10
Performance exhaust ventilation m3 / h approx. 6000
Performance cykl./min approx. 2.5
Carriage speed m / min Working 10-23
return 32
Operating voltage AC 3x400 V + N + PE
The frequency of 50 Hz
Control voltage 24 V DC
The starting system drives the cutter SoftStart
Control of spindle speed rpm. 6000 ÷ 4500
Protection against drop in air pressure below 0.45 MPa

Mills operating in diameter? 200? 250 (optional? 160 to? 200) - does not fall within the scope
delivery
Possibility of międzycięć pre zaczopowanej strip:

possible to program the number of sections - 8
accuracy of approx. 10 mm in a single section (depending on the number and length czopowanych elements)