Single side edge bander HOLZHER TRIATHLON 1487V

Make: 
Holzher
Model: 
Triathlon 1487v
Description: 

LME003 EDGE BANDER SINGLE SIDED. Automatic machine to apply the edge into straight profiles  
GENERAL SPECIFICATIONS  
► Max. working panel height  with straight edge 60 mm  
► Applicable banding material in coils: thin edge and PVC up to 3 mm  
► Applicable banding material in strips: solid wood  
SYSTEM AND OPTIONALS OF THE PANEL HANDLING  
► Running driving chain  
► Top pression unit made by lines of idle wheels  
► Top pression unit with adjustable height  
► Adjusting in continuos feeding speed   8 - 20 m/min  
► Input panel guide  with adjusting by hand with visual unit  
► Lateral bar with lines of idle wheels to support the panels  
WORKING UNITS ON THE SQUARING SIDE  
► Anti-gluing unit made by 2 guns that spray liquid on the top and bottom part of the panel  
► Pre milling unit to rectify the side of the panel. It is made by 2 motors with automatic in/out intervention to avoid splinters on the panel - motors power 2 KW ( 12000 RPM)  
GLUING UNIT, INSERTION AND PRESSION OF THE EDGE   
► Support for edge coil  
► Glue injecting system by cartridges  
► Spreading roller to regulate the quantity of apllied glue  
► Guillotine to cut the edge in coils  
► Roller set to press the edge on straight profiles - nr.  1 + 2 pression rollers  - motorized regulation of depth position in automatic by numerical control  
WORKING UNITS ON THE EDGE BANDING  SIDE  
► End cutting unit with 2 motors to cut the excess edge on the front and back part of the panel - motors tiltable 0 /  10 degree - tilting regulation in automatic  - motors power 0.35 KW ( 9000 RPM)  
► Top and bottom rough trimming unit  - motors power 0.6 KW ( 18000 RPM)  
► Fine trimming unit to trim and round off the excess edge on the top and bottom part of the panel - motors tiltable 0 /  45 degree - motorized regulation of tilting in automatic by numerical control - motorized regulation of depth position in automatic by numerical control - motors power 2 x  1 KW ( 12.000 RPM)  
► Edge scraping unit for the edge superfinishing    
► Rounding unit  - nr.  1 motors to automatically round off the edge corners on the top and bottom part of the panel - motors power 0.6 KW ( 12.000 RPM)  
► Brushing unit with  2 motors to clean and polish the upper and lower edge    
CONTROL OF THE MACHINE AND ACCESSORIES  
► Control and program system  HOLZHER with the following features: - visual display  
► Adjustable hanging command board to control the machine   
► Incorporated electrical cabinet  
NORM AND OPTIONAL FOR THE SECURITY  
► Security norme CE mark  
► Safety and sound-proof enclosure  cabinet of the working units   
► Aspiration system on the top part of the safety enclosure  cabinet  

 

Contact

Ferwood srl's picture
FERWOOD SRL
ITALY
Pollenzo
+39 0172 474073

Send mail to the author

CAPTCHA
Please confirm that you are not a Robot. To prevent automated spam submissions.

Vertical Tabs