Double Sided Combination Edgebander IMA - COMBIMA CONCEPT/II/590/B/R3

Make: 
Ima
Model: 
Combima concept/ii/590/b/r3
Description: 

004412

Type of edging    Thin edge Thick edge 
Gluing System    EVA Hotmelt 
Min. panel height    8 mm
Max. panel height    60 mm
Min. panel width    240 mm
Max. panel width    3300 mm
Min. edge thickness    0.3 mm
Max. forward feed speed    50 m/min
Belt with Dogs    yes 
Distance between dogs    600 mm
Top pressure    yes 
Pressure with    rubber belt 
Panel support guides    yes 
with positioning by NCv    yes 
No. Panel Sizing / Milling units Right Side    2 
1
Unit    miller hogger 
automatic timed intervention    yes 
motor power    4.4 KW
2
Unit    double chipper, top and bottom 
with positioning by NC    yes 
motor power    4.4 KW
Same technical characteristics on the left side    yes 
Edge coil magazine    yes 
no. positions    6 
Gluing system    yes 
glue pot for hot melt glue    yes 
Roller set to press the edge    yes 
no. pressure roller    6 
No. Edge Processing Units    9 
1
Processing Unit    end trimming unit 
no. motors    2 
Max. machining speed    32 m/min
motor power    0.2 KW
r.p.m.    12000 RPM
2
Processing Unit    top and bottom rough trimming unit 
no. motors    2 
motor power    1 KW
r.p.m.    12000 RPM
3
Processing Unit    fine trimming unit to trim and round 
no. motors    2 
motor power    0.6 KW
r.p.m.    12000 RPM
4
Processing Unit    Corner rounding unit 
Constructor model    MFA 08.348 
no. motors    2 
with positioning by NC    yes 
Max. machining speed    20 m/min
motor power    0.6 KW
r.p.m.    12000 RPM
5
Processing Unit    edge scraping unit 
with positioning by NC    yes 
6
Processing Unit    glue scraping unit 
with positioning by NC    yes 
7
Processing Unit    buffing unit 
no. motors    2 
8
Processing Unit    milling hogging unit 
automatic timed intervention    yes 
motor power    4.4 KW
r.p.m.    6000 RPM
9
Processing Unit    milling hogging unit 
automatic timed intervention    yes 
motor power    4.4 KW
r.p.m.    6000 RPM
Control system    ICOS OPEN 
Safety standard CE mark    yes 
 

Contact

Ferwood srl's picture
FERWOOD SRL
ITALY
Pollenzo
+39 0172 474073

Send mail to the author

CAPTCHA
Please confirm that you are not a Robot. To prevent automated spam submissions.

Vertical Tabs