Squaring-edgebanding machine BIESSE STREAM SB1 9.5

Make: 
Biesse
Model: 
Stream sb1 9.5
Description: 

CONTROL SYSTEM

• Multi-axis numerical control with PC interface

• Windows operating system

• Programming and control system with the following features: color video - display display

• Built-in electrical cabinet

TECHNICAL FEATURES

• Min panel working width - max 240 - 1,200 mm

• Panel working length min - max 240 - 2,700 mm

• Working width / length adjustable directly from NC

• Panel protrusion (fixed) 35 mm

• Workable panel height with straight edge min - max 10-60 mm

• Thickness of edges applicable in roll min - max 0.3-3 mm

• Wheelbase distance 500 mm - Height adjustable directly from CN

• Track speed 10-40 m / min adjustable by inverter directly from CN

• Total installed power 64 kW

PANEL INTRODUCTION AND ADVANCE SYSTEM

• Upper presser consisting of a rubber strap with stain-resistant coating

• Upper presser with height adjustable by CN

• Feed belt consisting of steel links with smoothness guaranteed by special bearings

• The panel rests on rectified rubber surfaces with high grip and stain resistance

• Adjustable entrance guide

• Automatic central support for piece support

. Vertical hopper storage system for in-line feeding (removable if not necessary)

SQUARE SIDE FOR EVERY SIDE

• Nr. 1 +1 Anti-adhesive liquid application group in the upper and lower part of the panel

• Nr. 1 +1 Group pneumatic intervention cutter used as splinter during processing with panel in transverse position

• Nr. 1 +1 Double-stacked chip remover with horizontal motors for material removal to ensure parallelism of the panel sides

BONDING, LOADING AND PRESSURE OF THE EDGE FOR EACH SIDE

• Nr. 1 +1 LAMBERTONI gluing unit for PU glue (possibility of using standard EVA glue)

• Glue feeder from the ground

• Edge storage in 2-position rolls with automatic edge exchange managed by NC

• Horizontal shears for cutting materials in rolls

• Nr. 1 Pressure roller (diam.180) motorized by inverter + n.3 pressure rollers diam 80

PART TO EDGE FOR EVERY SIDE

• Nr. 1 +1 EN90-S BODY CUTTING UNIT with 2 motors for cutting the excess edge in the front and rear of the panel up to 3 mm - Motors with automatic inclination from 0/25 degrees from numerical control - Motor power 0.65 + 0.65 kW 12,000 rpm

• Nr. 1 +1 RS10 ROLLER TRIMMING unit with 2 overlapping motors - 1,2 + 1,2 kW motor power 12,000 rpm

• Nr. 1 +1 RGULATOR GROUP R10 with 2 independent motors inclinable on the horizontal from 0 ° to 45 ° - Automatic pneumatic exclusion of the unit - Motor power 0.65 + 0.65 kW 12.000 rpm

• FB30 UNIVERSAL MILLING UNIT for milling and channels - Adjustable 0/90 degrees - Pneumatic action

REGULATIONS AND OPTIONS FOR SAFETY

• CE mark safety regulations

• Protection booth and soundproofing of the operating groups

• Suction system in the upper part of the protection ca

Year: 
2002

Contact

Techwood s.r.l.'s picture
TECHWOOD S.R.L.
ITALY
Pesaro
+390721400309

Send mail to the author

CAPTCHA
Please confirm that you are not a Robot. To prevent automated spam submissions.

Vertical Tabs