Working center for boring - routing with 5 axes HOMAG BOF 311/60/F/K

Make: 
Homag
Model: 
Bof 311/60/f/k
Description: 

KME004

CNC  WORKING CENTRE FOR BORING ROUTING   
GENERAL SPECIFICATIONS  
► Industrial machine with heavy-duty structure  
► Working area axes "X","Y" axes: 6000 mm - 1730 mm  
► Stoke axis "Z": 800 mm  
► Travel speed axes "X","Y": 80 m/min -  80 m/min  
► Linear speed axis "Z": 30 m/min  
SUPPORTING AREA OF THE PANEL  
► Working areas  
► Nr. 10 movable work tables to support the panels   
► Suction cups for each work table with vacuum system for the locking of the working piece  
► Clamps with vacuum system for the locking of the working piece  
► Facilitated loading device through pneumatic bars assembled on the work tables that lift the pieces   
► Laser unit that allows to position quickly and precisely each suction cup on the work table  
► Led unit that allows to position quickly and precisely each suction cup on the work table  
► Nr.  2 vacuum pump   
BORING UNITS  
► Nr. 1 boring units, each one with the following specifications   
► Nr. 11 independent spindles for vertical boring in "X" direction  
► No.  6 independent spindles for vertical boring in "Y" direction   
► Nr. 1 horizontal boring head   with nr.  4 spindles in a cross position  
ROUTING UNITS  
► Nr. 1 electro-spindle in vertical position - automatic change of the tool - The working unit of the 5 axes router allows to work in continuosly by 360 degrees, increasing speed and productivity. This unit combined to the standard group avoid  the use  of aggregates and makes possible all type of difficult works. - liquid cooling system  - motor power 15 KW ( 1000/24000 RPM)  
OTHER WORKING UNITS  
TOOL CHANGER MAGAZINE  
► Rear tool changer magazine with nr.  18 positions   
► Angle drive head with 1 output for saw blade  350 mm  
► Angle drive head with 1 output for for saw blade or horizontal routing-drilling   
► Angle drive head with nr.  4 outputs for horizontal boring  
CONTROL OF THE MACHINE AND ACCESSORIES  
► Control and program system  POWER CONTROL PC 85 + WOOD WOP SOFTWARE - pc - screen colour - CD-ROM reader  - keyboard  
► Control of axes "X" - "Y" - "Z"  - 5th AXE  
► Adjustable separated command board to control the machine   
► Separated electrical cabinet  
NORM AND OPTIONAL FOR THE SECURITY  
► Security norme CE mark  
► Protection and sound-proof enclosure of the working units   
► Protection grids installed on the machine  
► Front safety carpets  

 

Contact

Ferwood srl's picture
FERWOOD SRL
ITALY
Pollenzo
+39 0172 474073

Send mail to the author

CAPTCHA
Please confirm that you are not a Robot. To prevent automated spam submissions.

Vertical Tabs