Squaring and edgebanding line (lot 1) HOMAG - BARGSTEDT KFR 24/27/29/QA/30

Make: 
Homag - bargstedt
Model: 
Kfr 24/27/29/qa/30
Description: 

LMG026

AUTOMATIC LINE  FOR SQUARING AND EDGEBANDING  
► POSITION 1 - OUR CODE: JMC044 - TYPE:  LOADER - BRAND: BARGSTEDT  - MODEL: R TBH 500/D/30/14/S  
AUTOMATIC SYSTEM TO LOAD PANELS in squaring-edgebanding line  
GENERAL SPECIFICATIONS  
► Industrial and fast system  
► Double sides for the loading of  the panels into the production line to avoid interruptions  
► Panels workable also in double row  
► Vacuum pump   
SYSTEM AND OPTIONALS OF THE PANEL HANDLING  
► Introduction of the panels row in the loading system through a motorized roller conveyor on the ground  
► Exit of the support panel  from the loading system through an idle roller conveyor on the ground  
► Motorized transfer conveyor for the introduction of  the panels into the production line - with comb-like frame to work panels in double row - approx. width 1500 mm - approx lenght  3000 mm  
►Interior motorized lifting table  
► Suction cup frame for the handling of the working panels that are lifted and put down through a vacuum system for the workpieces locking   
► Suction cups for each horizontal bar  
► Automatic device to detach the panels from the suction cup  
CONTROL OF THE MACHINE AND ACCESSORIES  
► Control and program system  PC POWER CONTROL - pc - screen colour - CD-ROM reader  - keyboard  
► Adjustable separated command board to control the machine   
► Separated electrical cabinet  
NORM AND OPTIONAL FOR THE SECURITY  
► Security norme CE mark  
► Protection grids installed on the machine  
► Total installed power 21 KW  
  
► POSITION 2 - OUR CODE: JMC045 - TYPE:  DOUBLE SIDE SQUARING EDGE BANDER - BRAND: HOMAG - MODEL: KFL 525/7/A3/15  
► SQUARING AND EDGEBANDING MACHINE  DOUBLE SIDED. Automatic machine to apply the edge into straight profiles  
GENERAL SPECIFICATIONS  
► Industrial machine with heavy-duty structure  
► Machine able to work as first position in a line  
► Applicable banding material in coils: thin edge and PVC up to 3 mm  
► Max. working width 1.500 mm  
► Working units are installed on overtables to simultaneusly adjust them   
SYSTEM AND OPTIONALS OF THE PANEL HANDLING  
► Driving chain is rurring by roller bearings   
► Chain extension length in entry 1000 mm (distance from the beginning of the chain to the machine cabinet)  
► Top pression unit made by motorized rubbered belt  
► Top pression unit with adjustable height in automatic by numerical control  
► Adjusting in continuos feeding speed   with regulation in automatic by numerical control 15 / 40 m/min  
► Input panel guide   
WORKING UNITS ON THE SQUARING SIDE FOR EACH SIDE  
► Anti-gluing unit made by 2 guns that spray liquid on the top and bottom part of the panel  
► Top and bottom double hogging unit  - motors power 4.4 KW / 6.6 KW ( 3480 / 7080 RPM)  
► Milling shaping unit - automatic in/out intervention - tiltable 0 - 90 degree - motor power 4.4 KW / 6.6 KW ( 3480 / 7080 RPM)  
GLUING UNIT, INSERTION AND PRESSION OF THE EDGE  FOR EACH SIDE  
► Lamp zone to pre-heat the side of the panel  
► Multiple magazine for edge coils with nr.   2 positions, to automatically change the edge type   
► Hot-melt glue pot  and premelter  
► Spreading roller to regulate the quantity of apllied glue  
► Guillotine to cut the edge in coils  
► Roller set to press the edge on straight profiles - nr.  1 + 4 pression rollers  - motorized regulation of depth position in automatic by numerical control  
WORKING UNITS ON THE EDGE BANDING  SIDE  
► Milling shaping unit - tiltable 0 - 90 degree - motor power 4.4  / 6.6 KW ( 3480 / 7080 RPM)  
► Top and bottom rough trimming unit  - motors power 0.55 KW ( 12.000 RPM)  
► Fine trimming unit to trim and round off the excess edge on the top and bottom part of the panel - motors power 0.4 KW ( 12.000 RPM)  
► Free space to eventually add on request an additional working unit  
► Edge scraping unit for the edge superfinishing    
► Glue scraping unit to remove the excess glue from the join between edge and panel  
► Brushing unit with 2 motors to clean and polish the upper and lower edge    
CONTROL OF THE MACHINE AND ACCESSORIES  
► Control and program system  HOMATIC NC 21 with the following features: - screen colour - keyboard  
► Adjustable hanging command board to control the machine   
► Incorporated electrical cabinet  
NORM AND OPTIONAL FOR THE SECURITY  
► Security norme CE mark  
► Safety and sound-proof enclosure  cabinet of the working units   
► Aspiration system on the top part of the safety enclosure  cabinet  
  
► POSITION 3 - OUR CODE: JMC046 - TYPE:  TURNING DEVICE FOR PANELS - BRAND: BARGSTEDT  - MODEL: PROFI TD 31/30/12  
AUTOMATIC SYSTEM TO TURN THE PANEL AT 90 DEGREE IN A PRODUCTION LINE  
GENERAL SPECIFICATIONS  
► Industrial and fast system  
► Useful length of the panel 3000 mm  
SYSTEM AND OPTIONALS OF THE PANEL HANDLING  
► Automatic system to turn the panel from longitudinal sense to cross sense  
► Rotation of the panel through double counter-placed cones  
► Adjusting in continuos speed of the piece feeding with regulation in automatic by numerical control  
CONTROL OF THE MACHINE AND ACCESSORIES  
► Control and program system   
► Incorporated electrical cabinet  
NORM AND OPTIONAL FOR THE SECURITY  
► Security norme CE mark  
► Protection grids installed on the machine  
  
► POSITION 4 - OUR CODE: JMC047 - TYPE:  DOUBLE SIDE SQUARING EDGE BANDER - BRAND: HOMAG - MODEL: KFL 526/9/A3/30  
► SQUARING AND EDGEBANDING MACHINE  DOUBLE SIDED. Automatic machine to apply the edge into straight profiles  
GENERAL SPECIFICATIONS  
► Industrial machine with heavy-duty structure  
► Machine able to work both as first or second position in a line  
► Applicable banding material in coils: thin edge and PVC up to 3 mm  
► Max. working width 3000 mm  
► Working units are installed on overtables to simultaneusly adjust them   
SYSTEM AND OPTIONALS OF THE PANEL HANDLING  
► Driving chain is rurring by roller bearings   
► Chain extension length in entry 2000 mm (distance from the beginning of the chain to the machine cabinet)  
► Top pression unit made by motorized rubbered belt  
► Top pression unit with adjustable height in automatic by numerical control  
► Adjusting in continuos feeding speed   with regulation in automatic by numerical control 15 / 40 m/min  
► Input panel guide   
► Central bar with lines of idle wheels to support the panels  
WORKING UNITS ON THE SQUARING SIDE FOR EACH SIDE  
► Anti-gluing unit made by 2 guns that spray liquid on the top and bottom part of the panel  
► Antisplint milling hogging unit  - automatic in/out intervention - in vertical position - motor power 4.4 KW  
► Top and bottom double hogging unit  - motors power 4.4 / 6.6 KW ( 3480 / 7080 RPM)  
► Free space to eventually add on request an additional working unit  
GLUING UNIT, INSERTION AND PRESSION OF THE EDGE  FOR EACH SIDE  
► Lamp zone to pre-heat the side of the panel  
► Multiple magazine for edge coils with nr.   2 positions, to automatically change the edge type   
► Hot-melt glue pot  and premelter  
► Spreading roller to regulate the quantity of apllied glue  
► Guillotine to cut the edge in coils  
► Roller set to press the edge on straight profiles - nr.  1 + 4 pression rollers  - motorized regulation of depth position in automatic by numerical control  
WORKING UNITS ON THE EDGE BANDING  SIDE FOR EACH SIDE  
► End cutting unit with 2 motors to cut the excess edge on the front and back part of the panel - motors tiltable 0 /  15 degree - motors power 0.4 KW ( 12000 RPM)  
► Top and bottom rough trimming unit  - motors power 0.55 KW ( 12000 RPM)  
► Double multifunction unit  FK 21/30 with regulation in automatic by numerical control. This unit has a double functions: A) to trim and round off the excess edge B) to round the edge corners on the top and bottom part of the panel  
► Milling shaping unit - automatic in/out intervention - tiltable 0 - 90 degree - motor power 4 / 5 KW ( 9600 / 11600 RPM)  
► Edge scraping unit for the edge superfinishing    
► Glue scraping unit to remove the excess glue from the join between edge and panel  
► Brushing unit with 2 motors to clean and polish the upper and lower edge   - oscillating system  
CONTROL OF THE MACHINE AND ACCESSORIES  
► Control and program system  HOMATIC NC 21 with the following features: - screen colour - keyboard  
► Adjustable hanging command board to control the machine   
► Incorporated electrical cabinet  
NORM AND OPTIONAL FOR THE SECURITY  
► Security norme CE mark  
► Safety and sound-proof enclosure  cabinet of the working units   
► Aspiration system on the top part of the safety enclosure  cabinet  
  
► POSITION 5 - OUR CODE: JMC048 - TYPE:  TURNING DEVICE FOR PANELS - BRAND: BARGSTEDT  - MODEL: TD 41/25/12  
AUTOMATIC SYSTEM TO TURN THE PANEL AT 90 DEGREE IN A PRODUCTION LINE  
GENERAL SPECIFICATIONS  
► Industrial and fast system  
► Useful length of the panel 3000 mm  
SYSTEM AND OPTIONALS OF THE PANEL HANDLING  
► Automatic system to turn the panel from longitudinal sense to cross sense  
► Rotation of the panel through double counter-placed cones  
► Adjusting in continuos speed of the piece feeding with regulation in automatic by numerical control  
CONTROL OF THE MACHINE AND ACCESSORIES  
► Control and program system   
► Incorporated electrical cabinet  
NORM AND OPTIONAL FOR THE SECURITY  
► Security norme CE mark  
► Protection grids installed on the machine  
► Total installed power 3 KW  
  
► POSITION 6 - OUR CODE: JMC049 - TYPE:  STACKER - BRAND: BARGSTEDT  - MODEL: R TSP 410/D/30/12  
AUTOMATIC SYSTEM TO STACK PANELS in squaring-edgebanding line  
GENERAL SPECIFICATIONS  
► Industrial and fast system  
► Double sides for the stacking of the panels of the production line to avoid interruptions  
► Panels workable also in double row  
► Useful width of the panel 1200 mm  
► Useful length of the panel 3000 mm  
► Vacuum pump   
SYSTEM AND OPTIONALS OF THE PANEL HANDLING  
► Exit of the support panel  from the loading system through  
► Exit of the panels row from the stacking system through a motorized roller conveyor on the ground  
► Motorized transfer conveyor for the receiving of the panels from the production line - with comb-like frame to work panels in double row  
► Suction cup frame for the handling of the working panels that are lifted and put down through a vacuum system for the workpieces locking   
► Suction cups for each horizontal bar  
► Automatic device to detach the panels from the suction cup  
CONTROL OF THE MACHINE AND ACCESSORIES  
► Control and program system  PC POWER CONTROL with the following features: - pc - screen colour - CD-ROM reader  - keyboard  
► Adjustable separated command board to control the machine   
► Separated electrical cabinet  
NORM AND OPTIONAL FOR THE SECURITY  
► Security norme CE mark  
► Protection grids installed on the machine  
► Total installed power 17 KW  
  

 

Contact

Ferwood srl's picture
FERWOOD SRL
ITALY
Pollenzo
+39 0172 474073

Send mail to the author

CAPTCHA
Please confirm that you are not a Robot. To prevent automated spam submissions.

Vertical Tabs