Single-side edgebander IDM OLIMPIC N 300-68

Make: 
Idm
Model: 
Olimpic n 300-68
Description: 

CONTROL SYSTEM 

• Numerical control PIC 200

• Adjustable hanging command board to control the machine

• Incorporated electrical cabinet

TECHNICAL FEATURES

• Panel working height with straight edge min - max 10-60 mm

• Edge thickness in coils min - max 0,4-3 mm

• Edge thickness in strips-narrow pieces min - max 0,4-16 mm

• Track in-feeding speed 8-30 m/min

• Dimensions of machine (L1xL2xH) 7.740x1.800x1.800 mm

PANEL INTRODUCTION AND FEEDING SYSTEM

• Slide driving chain

• Top pressure with idler rollers in double row

• Top pressure with electronic positioning

• In-feeding track manually adjustable

• Lateral panel support with aluminum track complete with supporting wheels

RECTIFYING UNIT  

• In-feed pre-milling unit TT/A WITH nr. 2 motors to rectify the side of the panel – Motors power 2 kW (2,8 HP) 12.000 rpm

GLUING UNIT, LOADING AND EDGE PRESSURE

• Gluing unit VC 34-2 QMS

• Disk coil holder

• Glue bowl for EVA glue – Glue bowl and premelterfor hot melt glue - Pneumatic exclusion for glue bowl

• Guillotine to cut the edge in rolls with automatic regulation of the shear pressure

• Edge pressure roller with timed rollers on straight profile - Nr. 1 + 3 pressure rollers

EDGE BANDING AREA

• Anti-adhesive unit to allow the optimum cleaning of the workpiece on the upper and lower surface of the panel

• End-cutting unit YU-750 with nr. 2 motors to cut the excess of the edge on the front and back of the panel with Flex system which allows automatic adjustment of the edge excess - Motors with auotmatic tilting 0°/15° - Working speed 25 m/min depending on the thickness of the edge - Motors power 0,33 kW (0,44 HP) 12.000 rpm each - Automatic exclusion of the unit

• Rough trimming unit R with 2 motors to reduce the excess edge on the top and bottom of the panel - Motors power 1 kW (1,4 HP) 12.000 rpm each - Automatic exclusion of the unit

• Fine trimming unit RF 97/0,5 with 2 motors for trimming and chamfering of the excess edge on top and bottom of the panel  - Composed by nr. 4 revolver with nr. 8 positions with manual adjustment - Motors power0,5 kW (0,7 HP) 12.000 rpm each - Automatic exclusion of the unit

• Rounding unit PR 1-2-3-4/94 with nr. 4 motors for automatic edge corners on top and bottom of the panel 

• Scraping unit RAS/97 to eliminate the imperfections derived from previous work on the top and bottom edge - Pneumatic exclusion of the unit- Complete of chip collection box

• Glue scraping unit to remove any glue excess on the flat surface of the panel near the edges

• Brushing unit  with nr. 1 motor to clean and polish the rounded edge

• Top Buffing unit for the reactivation of the color of the edges

NORM AND OPTIONAL FOR SECURITY

• CE Marks

• Protection and sound-proof cabin of the working units

• Suction system on the top of the protection cabin

Year: 
2001

Contact

Techwood s.r.l.'s picture
TECHWOOD S.R.L.
ITALY
Pesaro
+390721400309

Send mail to the author

CAPTCHA
Please confirm that you are not a Robot. To prevent automated spam submissions.

Vertical Tabs