Double side squaring edge bander HOMAG KL 26/8/A12/30/S2

Make: 
Homag
Model: 
Kl 26/8/a12/30/s2
Description: 

NME056

► SQUARING AND EDGEBANDING MACHINE  DOUBLE SIDED. Automatic machine to apply the edge into straight profiles  
GENERAL SPECIFICATIONS  
► Industrial machine with heavy-duty structure  
► Machine able to work both as first or second position in a line  
► Applicable banding material in coils: thin edge and PVC up to 3 mm  
► Applicable banding material in strips: solid wood up to  12 mm  
► Max. working width 3000 mm - running by THK guides  
SYSTEM AND OPTIONALS OF THE PANEL HANDLING  
► Driving chain is rurring by roller bearings   
► Chain extension length in entry 1600 mm (distance from the beginning of the chain to the machine cabinet)  
► Top pression unit made by motorized rubbered belt  
► Top pression unit with adjustable height by hand with visual unit in automatic by numerical control  
► Adjusting in continuos feeding speed   with regulation in automatic by numerical control  
► Input panel guide   
► Central bar with lines of idle wheels to support the panels  
WORKING UNITS ON THE SQUARING SIDE FOR EACH SIDE  
► Pre milling unit to rectify the side of the panel. It is made by 2 motors with automatic in/out intervention to avoid splinters on the panel - motors power 4 KW ( 9000 RPM)  
GLUING UNIT, INSERTION AND PRESSION OF THE EDGE  FOR EACH SIDE  
► Lamp zone to pre-heat the side of the panel  
► Multiple magazine for edge coils with nr.   6 positions, to automatically change the edge type   
► Hot-melt glue pot  and premelter   
► Spreading roller to regulate the quantity of apllied glue  
► Guillotine to cut the edge in coils  
► Roller set to press the edge on straight profiles - nr.  1 + 6 pression rollers  - motorized regulation of depth position in automatic by numerical control  
WORKING UNITS ON THE EDGE BANDING  SIDE FOR EACH SIDE  
► End cutting unit with 2 motors to cut the excess edge on the front and back part of the panel - motors tiltable 0 /  15 degree - tilting regulation in automatic  - motors power 0.5 KW ( 12000 RPM)  
► Top and bottom rough trimming unit  - motors power 1.5 KW ( 12000 RPM)  
► Rounding unit multifunction  FK 13 with regulation in automatic by numerical control. This unit has a double functions: A) to trim and round off the excess edge B) to round the edge corners on the top and bottom part of the panel - double automatic  tool changer with magazine nr.  8 positions - motors power 0,55 KW ( 12000 RPM)  
► Milling shaping unit - in vertical position  
► Milling shaping unit - in horizontal position - motorized regulation of depth position in automatic by numerical control  
► Edge scraping unit for the edge superfinishing   - regulation of position in automatic by numerical control  
► Glue scraping unit to remove the excess glue from the join between edge and panel  
► Air Heating unit to heat the edge and reactevate the colour  
► Brushing unit with   motors to clean and polish the upper and lower edge   - oscillating system  
CONTROL OF THE MACHINE AND ACCESSORIES  
► Control and program system  HOMATIC NC 21 with the following features: - screen colour - keyboard  
► Command board installed on an incorporated electrical cabinet to control the machine   
NORM AND OPTIONAL FOR THE SECURITY  
► Security norme CE mark  
► Safety and sound-proof enclosure  cabinet of the working units   
► Aspiration system on the top part of the safety enclosure  cabinet  
Technical data will be checked when the machine will be in our warehouses  

 

Contact

Ferwood srl's picture
FERWOOD SRL
ITALY
Pollenzo
+39 0172 474073

Send mail to the author

CAPTCHA
Please confirm that you are not a Robot. To prevent automated spam submissions.

Vertical Tabs