SQUADRABORDATRICE COMBINATA DOPPIA - HOMAG KL 26/8/A12/30/S2

Make: 
Homag
Model: 
Kl 26/8/a12/30/s2
Description: 

NME049

► SQUARING AND EDGEBANDING MACHINE  DOUBLE SIDED. Automatic machine to apply the edge into straight profiles  
GENERAL SPECIFICATIONS  
► Industrial machine with heavy-duty structure  
► Machine able to work both as first or second position in a line  
► Max. working panel height  with straight edge 60 mm  
► Applicable banding material in coils: thin edge  
► Applicable banding material in strips: solid wood up to  12 mm  
► Max. working width 3000 mm - running by THK guides  
► Revolver system for a facilitated regulation of the working units  
SYSTEM AND OPTIONALS OF THE PANEL HANDLING  
► Driving chain is rurring by roller bearings   
► Chain extension length in entry 2000 mm (distance from the beginning of the chain to the machine cabinet)  
► Top pression unit made by motorized rubbered belt  
► Top pression unit with adjustable height in automatic by numerical control  
► Adjusting in continuos feeding speed    
► Input panel guide   
WORKING UNITS ON THE SQUARING SIDE  
► Pre milling unit to rectify the side of the panel. It is made by 2 motors with automatic in/out intervention to avoid splinters on the panel - motors power 4 Kw ( 9000 RPM)  
GLUING UNIT, INSERTION AND PRESSION OF THE EDGE  FOR EACH SIDE  
► Support for edge coil  
► Hot-melt glue pot  and premelter   
► Spreading roller to regulate the quantity of apllied glue  
► Guillotine to cut the edge in coils  
► Roller set to press the edge on straight profiles - nr.  1 + 6 pression rollers   
WORKING UNITS ON THE EDGE BANDING  SIDE FOR EACH SIDE  
► End cutting unit with 2 motors to cut the excess edge on the front and back part of the panel - motors power 0.5 KW ( 12000 RPM)  
► Top and bottom rough trimming unit  - motors power 1,5 KW ( 12000 RPM)  
► Fine trimming unit to trim and round off the excess edge on the top and bottom part of the panel - motors tiltable 0 /  45 degree - motors power 0,4 KW ( 12000 RPM)  
► Edge scraping unit for the edge superfinishing    
► Glue scraping unit to remove the excess glue from the join between edge and panel  
► Belt sanding unit for flat edges  
► Brushing unit with  2 motors to clean and polish the upper and lower edge   - oscillating system  
CONTROL OF THE MACHINE AND ACCESSORIES  
► Control and program system  HOMATIC NC 21 with the following features: - screen colour - keyboard  
► Command board installed on an incorporated electrical cabinet to control the machine   
NORM AND OPTIONAL FOR THE SECURITY  
► Security norme CE mark  
► Safety and sound-proof enclosure  cabinet of the working units   
► Aspiration system on the top part of the safety enclosure  cabinet  

 

Contact

Ferwood srl's picture
FERWOOD SRL
ITALY
Pollenzo
+39 0172 474073

Send mail to the author

CAPTCHA
Please confirm that you are not a Robot. To prevent automated spam submissions.

Vertical Tabs