Single side edge bander HOMAG KAR 310/8/A20/S2 + panels return for edge bander LIGMATECH ZHR 30/R/095

Make: 
Homag + ligmatech
Model: 
Kar 310/8/a20/s2 + zhr 30/r/095
Description: 

NMC037

AUTOMATIC THROUGH-FEED LINE MADE BY  
► POSITION 1 - OUR CODE: MML012 - TYPE:  SINGLE SIDE EDGE BANDER - BRAND: HOMAG - MODEL: KAR 310/8/A20/S2  
 EDGE BANDER SINGLE SIDED. Automatic machine to apply the edge into straight profiles  
GENERAL SPECIFICATIONS  
► Industrial machine with heavy-duty structure  
► Max. working panel height  with straight edge 60 mm  
► Applicable banding material in coils: thin edge and PVC up to 3 mm  
► Applicable banding material in strips: solid wood up to  20 mm  
SYSTEM AND OPTIONALS OF THE PANEL HANDLING  
► Running driving chain  
► Top pression unit made by motorized rubbered belt  
► Top pression unit with adjustable height in automatic by numerical control  
► Input panel guide  is motorized and with adjusting in automatic by numerical control  
► Lateral bar with lines of idle wheels to support the panels  
WORKING UNITS ON THE SQUARING SIDE  
► Anti-gluing unit made by 2 guns that spray liquid on the top and bottom part of the panel  
► Pre milling unit to rectify the side of the panel. It is made by 2 motors with automatic in/out intervention to avoid splinters on the panel - motors power 2 KW ( 12000 RPM)  
GLUING UNIT, INSERTION AND PRESSION OF THE EDGE   
► Lamp zone to pre-heat the side of the panel  
► Multiple magazine for edge coils with nr.   6 positions, to automatically change the edge type   
► Hot-melt glue pot  and premelter   
► Guillotine to cut the edge in coils  
► Roller set to press the edge on straight profiles - nr.  1 + 6 pression rollers  - motorized regulation of depth position in automatic by numerical control  
WORKING UNITS ON THE EDGE BANDING  SIDE  
► End cutting unit with 2 motors to cut the excess edge on the front and back part of the panel - motors tiltable 0 /  15 degree - tilting regulation in automatic  - motors power 0.8 Kw ( 12000 RPM)  
► Top and bottom rough trimming unit  - motors power 1.5 Kw ( 12000 RPM)  
► Fine trimming unit to trim and round off the excess edge on the top and bottom part of the panel - motors tiltable 0 /  25 degree - motorized regulation of depth position in automatic by numerical control  
► Rounding unit multifunction  FF12 with regulation in automatic by numerical control. This unit has a double functions: A) to trim and round off the excess edge B) to round the edge corners on the top and bottom part of the panel - motors power 0.55 Kw ( 12000 RPM)  
► Edge scraping unit for the edge superfinishing   - regulation of position in automatic by numerical control  
► Glue scraping unit to remove the excess glue from the join between edge and panel  
► Brushing unit with  2 motors to clean and polish the upper and lower edge    
► Free space to eventually add on request an additional working unit  
CONTROL OF THE MACHINE AND ACCESSORIES  
► Control and program system  PC POWER CONTROL 22 with the following features: - pc - screen colour  
► Adjustable hanging command board to control the machine   
► Incorporated electrical cabinet  
NORM AND OPTIONAL FOR THE SECURITY  
► Security norme CE mark  
► Safety and sound-proof enclosure  cabinet of the working units   
► Aspiration system on the top part of the safety enclosure  cabinet  
  
► POSITION 2 - OUR CODE: MML013 - TYPE:  PANELS RETURN FOR EDGE BANDER - BRAND: LIGMATECH  - MODEL: ZHR 30/R/095  
AUTOMATIC SYSTEM TO STACK THE PANELS FROM A SINGLE SIDE EDGE BANDER  
GENERAL SPECIFICATIONS  
► Industrial and fast system  
► Automatic system to stack panels from a single side edge bander - the panel is trasported towards the beginning of the edge bander where is the worker who therefore can always stay in feeding position of the machine   
SYSTEM AND OPTIONALS OF THE PANEL HANDLING  
► Exit of the panel from the edge bander through transfering table with roller conveyor device. The working piece is glided on the next conveyor through pneumatic acting  
► Motorized carpet conveyor for the transport of the panel - approx. width 1200 mm - approx lenght  8700 mm  
CONTROL OF THE MACHINE AND ACCESSORIES  
► Control and program system  with the following features: - visual display - keyboard  
► Command board installed on an incorporated electrical cabinet to control the machine   
NORM AND OPTIONAL FOR THE SECURITY  
► Security norme CE mark  
  

 

Contact

Ferwood srl's picture
FERWOOD SRL
ITALY
Pollenzo
+39 0172 474073

Send mail to the author

CAPTCHA
Please confirm that you are not a Robot. To prevent automated spam submissions.

Vertical Tabs