Numeric controlled beam panel saw SELCO EBTR 120 TWIN PUSHER

Make: 
Selco
Model: 
Ebtr 120 twin pusher
Description: 

MMI021

NUMERIC CONTROLLED BEAM PANEL SAW WITH AUTOMATIC LOADING  
GENERAL SPECIFICATIONS  
► Industrial machine with heavy-duty structure  
► Useful working cutting width  4400 mm  
► Useful working cutting length  4300 mm  
► Max. main blade projection 122 mm  
► Double automatic lateral aligner with pneumatic cylinders. The aligning cylinders are one before and one after the cutting line  
FEEDING AND STACKING OF THE PANELS  
► Panels stacking: front and manual   
► Panels loading: automatic, with rear lifting table  - table dimensions 4400  X  2200 mm  
► Loading of the panels row on the lifting table through:  - nr. 1 motorized roller conveyor for lateral preloading on left side   
► Device to rotate the panel of 90 degree - the package is lifted, turned and put down on the wheels of the machine table without any friction with it. The turning station can execute very complicated cutting patterns which require one or more pre-cuttings for a better use of the panel surface. Package clamping devices and high rotation speed allow reduced working times and packages perfectly aligned  
► Supporting table under the pusher carriage equipped with idle rollers to avoid any scratching on the panels  
FRONT SUPPORTING TABLES  
► Nr. 1 fixed front table with with additional guide - covered by bachelite - air blowing device - table dimension 2050 x 850 mm  
► Nr. 3 front tables  - air blowing device - tables dimension  2050 x 650 mm  
SAW CARRIAGE TECHNICAL DATA  
► Speed of saw carriage: - forward 0-150 m/min. - back 120 m/min  
► Carriage with main blade and scoring saw units  
► Main blade - max. tool diameter 430 mm - regulation of height position in automatic by numerical control - motor power 18.5 Kw ( 2880 RPM)  
► Scoring saw - max. tool diameter 200 mm - motor power 2.2 KW  
► "Quick change" system of the saw blades  QUICK CHANGE  
PUSHER TECHNICAL DATA  
► Motorized pusher carriage  - nr.  11 grippers to clamp the package of panels  
► Speed of the carriage:  - forward 1 - 100 m/min. - back 100 m/min  
► Auxiliary   : its grippers are independent and they can be selectively raised up to the working table. The two pushers, the main and the auxiliary one, are completely independent, but complementary to each other and they can perform independently two cutting phases at the same time, like two cross cut cycles, one rip and one cross cut cycles, etc. - nr.  5 grippers to clamp the package of panels - Speed of the carriage: - forward 1 - 120 m/min. - back 120 m/min  
CONTROL OF THE MACHINE AND ACCESSORIES  
► Control and program system  OSI (OPEN SELCO INTERFACE) with the following features: - pc - screen colour - CD-ROM reader  - keyboard  
► Adjustable hanging command board to control the machine   
► Incorporated electrical cabinet  
NORM AND OPTIONAL FOR THE SECURITY  
► Protection grids installed on the machine  
► Rear safety photo-electric cells  
► Total installed power 29.5 Kw  

 

Contact

Ferwood srl's picture
FERWOOD SRL
ITALY
Pollenzo
+39 0172 474073

Send mail to the author

CAPTCHA
Please confirm that you are not a Robot. To prevent automated spam submissions.

Vertical Tabs