Single side edge bander BRANDT HIGHFLEX 1650

Make: 
Brandt
Model: 
Highflex 1650
Description: 

 

MMG022

 EDGE BANDER SINGLE SIDED.  
GENERAL SPECIFICATIONS  
► Industrial machine with heavy-duty structure  
► Max. working panel height  with straight edge 10 - 60 mm  
► Applicable banding material in coils: thin edge and PVC up to 3 mm  
► Applicable banding material in strips: solid wood up to  12 mm  
SYSTEM AND OPTIONALS OF THE PANEL HANDLING  
► Running driving chain  
► Top pression unit made by motorized rubbered belt  
► Top pression unit with adjustable height in automatic by numerical control  
► Adjusting in continuos feeding speed   with regulation in automatic by numerical control 8/ 16 m/min  
► Input panel guide  is motorized and with adjusting in automatic by numerical control  
► Lateral bar with lines of idle wheels to support the panels  
WORKING UNITS ON THE SQUARING SIDE  
► Pre milling unit to rectify the side of the panel. It is made by 2 motors with automatic in/out intervention to avoid splinters on the panel - motors power 2,2 KW ( 12000 RPM)  
GLUING UNIT, INSERTION AND PRESSION OF THE EDGE   
► Lamp zone to pre-heat the side of the panel  
► Support for edge coil  
► Hot-melt glue pot  and premelter   
► Spreading roller to regulate the quantity of apllied glue  
► Guillotine to cut the edge in coils  
► Roller set to press the edge on straight profiles - nr.  1 + 3 pression rollers  - motorized regulation of depth position in automatic by numerical control  
WORKING UNITS ON THE EDGE BANDING  SIDE  
► End cutting unit with 2 motors to cut the excess edge on the front and back part of the panel - motors tiltable 0 /  15 degree - motors power 0.35 KW ( 12000 RPM)  
► Top and bottom rough trimming unit  - motors power 0,55 KW ( 12000 RPM)  
► Rounding unit  - nr.  2 motors to automatically round off the edge corners on the top and bottom part of the panel - motors power 0.35 KW ( 12000 RPM)  
► Edge scraping unit for the edge superfinishing    
► Glue scraping unit to remove the excess glue from the join between edge and panel  
► Brushing unit with   motors to clean and polish the upper and lower edge    
CONTROL OF THE MACHINE AND ACCESSORIES  
► Control and program system  POWER CONTROL PC 20 + with the following features: - screen colour - visual display  
► Adjustable hanging command board to control the machine   
► Incorporated electrical cabinet  
NORM AND OPTIONAL FOR THE SECURITY  
► Security norme CE mark  
► Safety and sound-proof enclosure  cabinet of the working units   
► Aspiration system on the top part of the safety enclosure  cabinet  

 

Contact

Ferwood srl's picture
FERWOOD SRL
ITALY
Pollenzo
+39 0172 474073

Send mail to the author

CAPTCHA
Please confirm that you are not a Robot. To prevent automated spam submissions.

Vertical Tabs