Double side squaring edge bander IMA COMBIMA/II/935/F

Make: 
Ima
Model: 
Combima/ii/935/f
Description: 

MMG031

► SQUARING AND EDGEBANDING MACHINE  DOUBLE SIDED. Automatic machine to apply the edge into straight profiles  
GENERAL SPECIFICATIONS  
► Industrial machine with heavy-duty structure  
► Machine able to work as first position in a line  
► Max. working panel height  with straight edge 8 - 60 mm  
► Applicable banding material in coils: thin edge and PVC up to 3 mm  
SYSTEM AND OPTIONALS OF THE PANEL HANDLING  
► Driving chain is rurring by roller bearings   
► Top pression unit made by motorized rubbered belt  
► Top pression unit with adjustable height in automatic by numerical control  
► Input panel guide   
WORKING UNITS ON THE SQUARING SIDE FOR EACH SIDE  
► Anti-gluing unit made by 2 guns that spray liquid on the top and bottom part of the panel  
► Pre milling unit to rectify the side of the panel. It is made by 2 motors with automatic in/out intervention to avoid splinters on the panel  
► Top and bottom double hogging unit  - motorized regulation of height position in automatic by numerical control - motors power 4.4/6.6 Kw ( 2850/5870 RPM)  
► Milling shaping unit - automatic in/out intervention - tiltable 0 - 90 degree - motor power 2.7/4.5 Kw ( 2860/5870 RPM)  
GLUING UNIT, INSERTION AND PRESSION OF THE EDGE  FOR EACH SIDE  
► Lamp zone to pre-heat the side of the panel  
► Multiple magazine for edge coils with nr.   6 positions, to automatically change the edge type   
► Poliuretanic glue pot and premelter   
► Spreading roller to regulate the quantity of apllied glue  
► Guillotine to cut the edge in coils  
► Roller set to press the edge on straight profiles - nr.  1 + 4 pression rollers   
WORKING UNITS ON THE EDGE BANDING  SIDE FOR EACH SIDE  
► End cutting unit with 1 motor to cut the excess edge on the front and back part of the panel  
► Top and bottom rough trimming unit  - motors power 1 KW ( 12000 RPM)  
► Fine trimming unit to trim and round off the excess edge on the top and bottom part of the panel - motors tiltable 0 /  25 degree  
► Fine trimming unit to trim and round off the excess edge on the top and bottom part of the panel - motors tiltable 0 /  25 degree - motors power 1 Kw ( 12000 RPM)  
► Edge scraping unit for the edge superfinishing    
► Glue scraping unit to remove the excess glue from the join between edge and panel  
► Superfinishing unit with spheres to finish and reactevate the colour on edges of plastic material  
► Brushing unit with  2 motors to clean and polish the upper and lower edge   - oscillating system  
CONTROL OF THE MACHINE AND ACCESSORIES  
► Control and program system  IMATRONIC 100 with the following features: colour - visual display - keyboard  
► Adjustable separated command board to control the machine   
NORM AND OPTIONAL FOR THE SECURITY  
► Security norme CE mark  
► Safety and sound-proof enclosure  cabinet of the working units   
► Aspiration system on the top part of the safety enclosure  cabinet  

 

Contact

Ferwood srl's picture
FERWOOD SRL
ITALY
Pollenzo
+39 0172 474073

Send mail to the author

CAPTCHA
Please confirm that you are not a Robot. To prevent automated spam submissions.

Vertical Tabs