Working center for boring - routing - edgebanding IMA BIMA 410V 140/600

Make: 
Ima
Model: 
Bima 410v 140/600
Description: 

 

MME020

CNC  WORKING CENTRE FOR BORING ROUTING  EDGE BANDING  
GENERAL SPECIFICATIONS  
► Industrial machine with heavy-duty structure  
► Working area axes "X","Y" axes: 6000 mm - 1600 mm  
► Travel speed axes "X","Y": 0-100 m/min -  80 m/min  
► Linear speed axis "Z": 25 m/min  
SUPPORTING AREA OF THE PANEL  
► Working areas  
► Nr. 10 movable work tables to support the panels  - approx lenght each  1600 mm  
► Suction cups for each work table with vacuum system for the locking of the working piece  
► Facilitated loading device through pneumatic bars assembled on the work tables that lift the pieces   
► Laser unit that allows to position quickly and precisely each suction cup on the work table  
► Nr.  1 vacuum pump  140 m3/h  
► Pusher placed on the movable beam, that allows to push out automatically the panel from the working field. The panel arrive on a side table placed on the right side of the machine, cleaning and preparing the working field for the next operation.  
BORING UNITS  
► Nr. 1 boring units  
► Nr. 11 independent spindles for vertical boring in "X" direction  
► No.  9 independent spindles for vertical boring in "Y" direction   
► No. 2 spindles for horizontal boring in "X" direction   
► Nr. 1 horizontal boring head   with nr.  3 spindles in a cross position  
ROUTING UNITS  
► Nr. 1 electro-spindle in vertical position - automatic change of the tool - "C" VECTOR AXIS that allows to turn and 360° angle drive heads with rotation regulation in automatic by numerical control    - liquid cooling system  - motor power 14.5/18 Kw ( 1500 - 24000 RPM)  
► Nr. 1 electro-spindle in vertical position  
EDGE BANDING UNITS  
► Automatic device to apply the edge into straight profiles of shaped panels VT 50  
► Max. working panel height  with straight edge 60 mm  
► Applicable banding material in coils: thin edge and PVC up to 3 mm  
►  Independent unit to edge band shaped panels. It's installed on the main frame of the machine - hot-melt glue pot  and premelter  - spreading roller  to regulate the quantity of apllied glue - edge pression roller  
► Lamp zone to pre-heat the side of the panel  
► Multiple magazine for edge coils with nr.   2 positions, to automatically change the edge type   
OTHER WORKING UNITS  
TOOL CHANGER MAGAZINE  
► Rear tool changer magazine with nr.  18 positions   
► Angle drive head with 1 output for saw blade to cut the edge and to make cuts and groovings  
► Top and bottom edge trimming head-unit   
► Edge scraping head-unit   
CONTROL OF THE MACHINE AND ACCESSORIES  
► Control and program system  ICOS OPEN 231 + IMAWOP + IMAWINCAD with the following features: - pc - screen colour - CD-ROM reader  - keyboard  
► Control of axes "X" - "Y" - "Z"  - "C" VECTOR  
► Command board installed on a separated electrical cabinet to control the machine   
► Separated electrical cabinet  
NORM AND OPTIONAL FOR THE SECURITY  
► Security norme CE mark  
► Protection and sound-proof enclosure of the working units   
► Protection grids installed on the machine  
► Automatic system to out-put the wood wastes  

 

Contact

Ferwood srl's picture
FERWOOD SRL
ITALY
Pollenzo
+39 0172 474073

Send mail to the author

CAPTCHA
Please confirm that you are not a Robot. To prevent automated spam submissions.

Vertical Tabs