Squaring and edgebanding line IDM+ESSE2 LEVEL HD+TM-RC+LEVEL HD

Make: 
Idm+esse2
Model: 
level hd+tm-rc+level hd
Description: 

MMD075

AUTOMATIC THROUGH-FEED LINE MADE BY  
► POSITION 1 - OUR CODE: MMD077 - TYPE:  SINGLE SIDE EDGE BANDER - BRAND: IDM - MODEL: LEVEL HD  
 EDGE BANDER SINGLE SIDED. Automatic machine to apply the edge into straight profiles  
GENERAL SPECIFICATIONS  
► Industrial machine with heavy-duty structure  
► Max. working panel height  with straight edge 10 - 60 mm  
► Applicable banding material in coils: thin edge and PVC up to 3 mm  
SYSTEM AND OPTIONALS OF THE PANEL HANDLING  
► Top pression unit made by lines of idle wheels  
► Top pression unit with adjustable height in automatic by numerical control  
► Double feeding speed 12 / 20 m/min  
► Input panel guide  is motorized and with adjusting in automatic by numerical control  
► Lateral bar with lines of idle wheels to support the panels  
WORKING UNITS ON THE SQUARING SIDE  
► Anti-gluing unit made by 2 guns that spray liquid on the top and bottom part of the panel  
► Pre milling unit to rectify the side of the panel. It is made by 2 motors with automatic in/out intervention to avoid splinters on the panel - motors power 2.2 KW  
GLUING UNIT, INSERTION AND PRESSION OF THE EDGE   
► Lamp zone to pre-heat the side of the panel  
► Support for edge coil  
► Hot-melt glue pot  and premelter   
► Spreading roller to regulate the quantity of apllied glue  
► Guillotine to cut the edge in coils  
► Roller set to press the edge on straight profiles - nr.  1 + 3 pression rollers  - motorized regulation of depth position in automatic by numerical control  
WORKING UNITS ON THE EDGE BANDING  SIDE  
► End cutting unit with 2 motors to cut the excess edge on the front and back part of the panel - motors tiltable 0 /  15 degree - motors power 0.35 KW -  Max. working speed 12000 m/min  
► Top and bottom rough trimming unit   
► Fine trimming unit to trim and round off the excess edge on the top and bottom part of the panel - motorized regulation of depth position in automatic by numerical control - motors power 1 KW ( 12000 RPM)  
► Rounding unit  - nr.  4 motors to automatically round off the edge corners on the top and bottom part of the panel - this unit can be also used as fine trimming unit - motors power 0,5 KW  
► Edge scraping unit for the edge superfinishing    
► Milling shaping unit - tiltable 0 - 90 degree  
► Glue scraping unit to remove the excess glue from the join between edge and panel  
► Brushing unit with  2 motors to clean and polish the upper and lower edge   - oscillating system  
► Air Heating unit to heat the edge and reactevate the colour  
CONTROL OF THE MACHINE AND ACCESSORIES  
► Control and program system  with the following features: - pc - screen colour - CD-ROM reader  - keyboard  
► Adjustable hanging command board to control the machine   
► Incorporated electrical cabinet  
NORM AND OPTIONAL FOR THE SECURITY  
► Security norme CE mark  
► Safety and sound-proof enclosure  cabinet of the working units   
► Aspiration system on the top part of the safety enclosure  cabinet  
Technical data will be checked when the machine will be in our warehouses  
  
► POSITION 2 - OUR CODE: MMD078 - TYPE:  180 DEGREES CONVEYOR - BRAND: ESSE 2 S.R.L. - MODEL: TR R-C  
GENERAL SPECIFICATIONS  
SYSTEM AND OPTIONALS OF THE PANEL HANDLING  
► Motorized transfer conveyor for the receiving of the panels from the production line  
► Motorized transfer conveyor for the introduction of  the panels into the production line  
► Automatic system for panel transport of 180 degree  
► Adjusting in continuos feeding speed    
CONTROL OF THE MACHINE AND ACCESSORIES  
► Control and program system   
► Command board installed on a separated electrical cabinet to control the machine   
NORM AND OPTIONAL FOR THE SECURITY  
► Security norme CE mark  
Technical data will be checked when the machine will be in our warehouses  
  
► POSITION 3 - OUR CODE: MMD076 - TYPE:  SINGLE SIDE EDGE BANDER - BRAND: IDM - MODEL: LEVEL HD  
 EDGE BANDER SINGLE SIDED. Automatic machine to apply the edge into straight profiles  
GENERAL SPECIFICATIONS  
► Industrial machine with heavy-duty structure  
► Max. working panel height  with straight edge 10 - 60 mm  
► Applicable banding material in coils: thin edge and PVC up to 3 mm  
SYSTEM AND OPTIONALS OF THE PANEL HANDLING  
► Top pression unit made by lines of idle wheels  
► Top pression unit with adjustable height in automatic by numerical control  
► Double feeding speed 12 / 20 m/min  
► Input panel guide  is motorized and with adjusting in automatic by numerical control  
► Lateral bar with lines of idle wheels to support the panels  
WORKING UNITS ON THE SQUARING SIDE  
► Anti-gluing unit made by 2 guns that spray liquid on the top and bottom part of the panel  
► Pre milling unit to rectify the side of the panel. It is made by 2 motors with automatic in/out intervention to avoid splinters on the panel - motors power 2.2 KW  
GLUING UNIT, INSERTION AND PRESSION OF THE EDGE   
► Lamp zone to pre-heat the side of the panel  
► Support for edge coil  
► Hot-melt glue pot  and premelter   
► Spreading roller to regulate the quantity of apllied glue  
► Guillotine to cut the edge in coils  
► Roller set to press the edge on straight profiles - nr.  1 + 3 pression rollers  - motorized regulation of depth position in automatic by numerical control  
WORKING UNITS ON THE EDGE BANDING  SIDE  
► End cutting unit with 2 motors to cut the excess edge on the front and back part of the panel - motors tiltable 0 /  15 degree - motors power 0.35 KW -  Max. working speed 12000 m/min  
► Top and bottom rough trimming unit   
► Fine trimming unit to trim and round off the excess edge on the top and bottom part of the panel - motorized regulation of depth position in automatic by numerical control - motors power 1 KW ( 12000 RPM)  
► Rounding unit  - nr.  4 motors to automatically round off the edge corners on the top and bottom part of the panel - this unit can be also used as fine trimming unit - motors power 0,5 KW  
► Edge scraping unit for the edge superfinishing    
► Milling shaping unit - tiltable 0 - 90 degree  
► Glue scraping unit to remove the excess glue from the join between edge and panel  
► Brushing unit with  2 motors to clean and polish the upper and lower edge   - oscillating system  
► Air Heating unit to heat the edge and reactevate the colour  
CONTROL OF THE MACHINE AND ACCESSORIES  
► Control and program system  with the following features: - pc - screen colour - CD-ROM reader  - keyboard  
► Adjustable hanging command board to control the machine   
► Incorporated electrical cabinet  
NORM AND OPTIONAL FOR THE SECURITY  
► Security norme CE mark  
► Safety and sound-proof enclosure  cabinet of the working units   
► Aspiration system on the top part of the safety enclosure  cabinet  
Technical data will be checked when the machine will be in our warehouses  
  

 

Contact

Ferwood srl's picture
FERWOOD SRL
ITALY
Pollenzo
+39 0172 474073

Send mail to the author

CAPTCHA
Please confirm that you are not a Robot. To prevent automated spam submissions.

Vertical Tabs