Single side edge bander SCM OLIMPIC S 2000

Make: 
Scm
Model: 
Scm olimpic s 2000
Description: 

MMD021

 EDGE BANDER SINGLE SIDED. Automatic machine to apply the edge into straight profiles  
GENERAL SPECIFICATIONS  
► Max. working panel height  with straight edge 10 - 60 mm  
► Applicable banding material in coils: thin edge and PVC up to 3 mm  
► Applicable banding material in strips: solid wood  
SYSTEM AND OPTIONALS OF THE PANEL HANDLING  
► Running driving chain  
► Top pression unit made by lines of idle wheels  
► Top pression unit with adjustable height  
► Input panel guide   
► Lateral bar with lines of idle wheels to support the panels  
WORKING UNITS ON THE SQUARING SIDE  
► Pre milling unit to rectify the side of the panel. It is made by 2 motors with automatic in/out intervention to avoid splinters on the panel - motors power 2,2 KW ( 12.000 RPM)  
GLUING UNIT, INSERTION AND PRESSION OF THE EDGE   
► Support for edge coil  
► Hot-melt glue pot  and premelter   
► Spreading roller to regulate the quantity of apllied glue  
► Guillotine to cut the edge in coils  
► Roller set to press the edge on straight profiles - nr.  1 + 2 pression rollers   
WORKING UNITS ON THE EDGE BANDING  SIDE  
► End cutting unit with 2 motors to cut the excess edge on the front and back part of the panel - motors tiltable 0 /  15 degree - tilting regulation in automatic  - motors power 0,35 KW ( 12000 RPM)  
► Top and bottom rough trimming unit  - motors power 1 KW ( 12.000 RPM)  
► Fine trimming unit to trim and round off the excess edge on the top and bottom part of the panel - motors tiltable 0 /  30 degree - regulation of the tilting by hand with visual unit  - motors power 0,55 KW ( 12000 RPM)  
► Rounding unit  - nr.  2 motors to automatically round off the edge corners on the top and bottom part of the panel - motors power 0.5 KW ( 12000 RPM)  
► Free space to eventually add on request an additional working unit  
► Edge scraping unit for the edge superfinishing    
► Brushing unit with  2 motors to clean and polish the upper and lower edge    
► Air Heating unit to heat the edge and reactevate the colour  
CONTROL OF THE MACHINE AND ACCESSORIES  
► Control and program system  MAGELIS with the following features: - visual display  
► Adjustable hanging command board to control the machine   
► Incorporated electrical cabinet  
NORM AND OPTIONAL FOR THE SECURITY  
► Security norme CE mark  
► Safety and sound-proof enclosure  cabinet of the working units   
► Aspiration system on the top part of the safety enclosure  cabinet  

 

Contact

Ferwood srl's picture
FERWOOD SRL
ITALY
Pollenzo
+39 0172 474073

Send mail to the author

CAPTCHA
Please confirm that you are not a Robot. To prevent automated spam submissions.

Vertical Tabs