Single side edge bander HOMAG KL 77/A25/S2

Make: 
Homag
Model: 
Kl 77/a25/s2
Description: 

 

MMD002

 EDGE BANDER SINGLE SIDED. Automatic machine to apply the edge into straight profiles  
GENERAL SPECIFICATIONS  
► Industrial machine with heavy-duty structure  
► Max. working panel height  with straight edge 60 mm  
► Applicable banding material in coils: thin edge  
► Applicable banding material in strips: solid wood up to  25 mm  
SYSTEM AND OPTIONALS OF THE PANEL HANDLING  
► Running driving chain  
► Top pression unit made by motorized rubbered belt  
► Top pression unit with adjustable height in automatic by numerical control  
► Adjusting in continuos feeding speed   with regulation in automatic by numerical control 18/24 m/min  
► Input panel guide   
► Lateral bar with lines of idle wheels to support the panels  
WORKING UNITS ON THE SQUARING SIDE  
► Anti-gluing unit made by 2 guns that spray liquid on the top and bottom part of the panel  
► Pre milling unit to rectify the side of the panel. It is made by 2 motors with automatic in/out intervention to avoid splinters on the panel - motors power 3 KW ( 9000 RPM)  
GLUING UNIT, INSERTION AND PRESSION OF THE EDGE   
► Lamp zone to pre-heat the side of the panel  
► Support for edge coil  
► Hot-melt glue pot  and premelter   
► Second poliuretanic glue pot and premelter   
► Spreading roller to regulate the quantity of apllied glue  
► Guillotine to cut the edge in coils  
► Roller set to press the edge on straight profiles - nr.  1 + 6 + 6 pression rollers   
WORKING UNITS ON THE EDGE BANDING  SIDE  
► End cutting unit with 2 motors to cut the excess edge on the front and back part of the panel - motors tiltable 0 /  15 degree - tilting regulation in automatic  - motors power 0.5 KW -  Max. working speed 12000 m/min  
► Top and bottom rough trimming unit  - motors power 1.5 KW ( 12000 RPM)  
► Fine trimming unit to trim and round off the excess edge on the top and bottom part of the panel - motors tiltable 0 /  25 degree - motors power 0.4 KW ( 12000 RPM)  
► Free space to eventually add on request an additional working unit  
► Belt sanding unit for flat edges  
CONTROL OF THE MACHINE AND ACCESSORIES  
► Control and program system  HOMATIC NC 21 with the following features: - screen colour - keyboard  
► Adjustable hanging command board to control the machine   
► Incorporated electrical cabinet  
NORM AND OPTIONAL FOR THE SECURITY  
► Security norme CE mark  
► Safety and sound-proof enclosure  cabinet of the working units   
► Aspiration system on the top part of the safety enclosure  cabinet  

 

Contact

Ferwood srl's picture
FERWOOD SRL
ITALY
Pollenzo
+39 0172 474073

Send mail to the author

CAPTCHA
Please confirm that you are not a Robot. To prevent automated spam submissions.

Vertical Tabs