Single side edge bander HOMAG KAL 310/7/A20/S3

Make: 
Homag
Model: 
Kal 310/7/a20/s3
Description: 

MMD011

 EDGE BANDER SINGLE SIDED. Automatic machine to apply the edge into straight profiles  
GENERAL SPECIFICATIONS  
► Max. working panel height  with straight edge 60 mm  
► Applicable banding material in coils: thin edge and PVC up to 3 mm  
► Applicable banding material in strips: solid wood up to  20 mm  
SYSTEM AND OPTIONALS OF THE PANEL HANDLING  
► Running driving chain  
► Top pression unit made by motorized rubbered belt  
► Top pression unit with adjustable height in automatic by numerical control  
► Input panel guide  is motorized and with adjusting in automatic by numerical control  
► Lateral bar with lines of idle wheels to support the panels  
► Lateral system to load the panel with pusher carriage to introduct the piece in perfect alignment  
WORKING UNITS ON THE SQUARING SIDE  
► Anti-gluing unit made by 2 guns that spray liquid on the top and bottom part of the panel  
► Pre milling unit to rectify the side of the panel. It is made by 2 motors with automatic in/out intervention to avoid splinters on the panel - motors power 2 KW ( 12000 RPM)  
GLUING UNIT, INSERTION AND PRESSION OF THE EDGE   
► Multiple magazine for edge coils with nr.   6 positions, to automatically change the edge type  - motorized regulation of height position in automatic by numerical control  
► Hot-melt glue pot  and premelter   
► Guillotine to cut the edge in coils  
► Roller set to press the edge on straight profiles - nr.  1 + 6 pression rollers  - motorized regulation of depth position in automatic by numerical control  
WORKING UNITS ON THE EDGE BANDING  SIDE  
► End cutting unit with 2 motors to cut the excess edge on the front and back part of the panel - motors tiltable 0 /  15 degree - motors power 0.8 Kw ( 12000 RPM)  
► Top and bottom rough trimming unit  - motors power 1.5 Kw ( 12000 RPM)  
► Rounding unit multifunction  FK 13 with regulation in automatic by numerical control. This unit has a double functions: A) to trim and round off the excess edge B) to round the edge corners on the top and bottom part of the panel - double automatic  tool changer with magazine nr.  8 positions - motors power 0.55 Kw ( 12000 RPM)  
► Edge scraping unit for the edge superfinishing   - regulation of position in automatic by numerical control  
► Glue scraping unit to remove the excess glue from the join between edge and panel  
► Brushing unit with  2 motors to clean and polish the upper and lower edge    
CONTROL OF THE MACHINE AND ACCESSORIES  
► Control and program system  PC POWER CONTROL 22 with the following features: - pc - screen colour  
► Adjustable hanging command board to control the machine   
► Incorporated electrical cabinet  
NORM AND OPTIONAL FOR THE SECURITY  
► Security norme CE mark  
► Safety and sound-proof enclosure  cabinet of the working units   
► Aspiration system on the top part of the safety enclosure  cabinet  

 

Contact

Ferwood srl's picture
FERWOOD SRL
ITALY
Pollenzo
+39 0172 474073

Send mail to the author

CAPTCHA
Please confirm that you are not a Robot. To prevent automated spam submissions.

Vertical Tabs