Single side edge bander HOMAG KAL 310/6/A3/S2

Make: 
Homag
Model: 
Kal 310/6/a3/s2
Description: 

MMC011

 EDGE BANDER SINGLE SIDED. Automatic machine to apply the edge into straight profiles  
GENERAL SPECIFICATIONS  
► Industrial machine with heavy-duty structure  
► Max. working panel height  with straight edge 60 mm  
► Applicable banding material in coils: thin edge and PVC up to 3 mm  
► Applicable banding material in strips: up to  3 mm  
SYSTEM AND OPTIONALS OF THE PANEL HANDLING  
► Running driving chain  
► Top pression unit made by motorized rubbered belt  
► Top pression unit with adjustable height in automatic by numerical control  
► Adjusting in continuos feeding speed   with regulation in automatic by numerical control 18-24 m/min  
► Input panel guide   
► Lateral bar with lines of idle wheels to support the panels  
WORKING UNITS ON THE SQUARING SIDE  
► Pre milling unit to rectify the side of the panel. It is made by 2 motors with automatic in/out intervention to avoid splinters on the panel - motors power 3 KW ( 9000 RPM)  
GLUING UNIT, INSERTION AND PRESSION OF THE EDGE   
► Multiple magazine for edge coils with nr.   2 positions, to automatically change the edge type   
► Hot-melt glue pot  and premelter   
► Spreading roller to regulate the quantity of apllied glue  
► Guillotine to cut the edge in coils  
► Roller set to press the edge on straight profiles - nr.  1 + 2 pression rollers  - motorized regulation of depth position in automatic by numerical control  
WORKING UNITS ON THE EDGE BANDING  SIDE  
► End cutting unit with 2 motors to cut the excess edge on the front and back part of the panel - motors tiltable 0 /  15 degree - tilting regulation in automatic  - motors power 0,18 kW ( 12000 RPM)  
► Top and bottom rough trimming unit  - motors power 0,55 KW ( 12.000 KW RPM)  
► Rounding unit multifunction  FK 11 with regulation in automatic by numerical control. This unit has a double functions: A) to trim and round off the excess edge B) to round the edge corners on the top and bottom part of the panel - motors power 0.4 KW -  Max. working speed 20 m/min ( 12000 RPM)  
► Edge scraping unit for the edge superfinishing    
► Glue scraping unit to remove the excess glue from the join between edge and panel  
► Brushing unit with   motors to clean and polish the upper and lower edge    
CONTROL OF THE MACHINE AND ACCESSORIES  
► Control and program system  POWER CONTROL PC 22 with the following features: - pc - screen colour - keyboard  
► Adjustable hanging command board to control the machine   
► Incorporated electrical cabinet  
NORM AND OPTIONAL FOR THE SECURITY  
► Security norme CE mark  
► Safety and sound-proof enclosure  cabinet of the working units   
► Aspiration system on the top part of the safety enclosure  cabinet  

 

Contact

Ferwood srl's picture
FERWOOD SRL
ITALY
Pollenzo
+39 0172 474073

Send mail to the author

CAPTCHA
Please confirm that you are not a Robot. To prevent automated spam submissions.

Vertical Tabs