Dřevoobráběcí stroje z - - pag 106

  • Four side planner SCM Sintex
    CB 2NRT1320
    * working width 190 mm * working height 120 mm * vertical heads on one engine with a power of 5.5 kW * horizontal heads on one engine with a power...
    12500.00 €
    Širokopásová bruska, použité
    maszynymdd
  • Press KOLMAG 300 x 130 cm
    Italmeccanica Profilwood
    * dimensions of shelves 300 x 130 cm * shelves clean, straight, not bent and no dents, I would say perfect condition * water-heated shelves with...
    4500.00 €
    Kartáčovací stroje, použité
    maszynymdd
  • Power feed SCM formula feed 48
    S.Giorgio 350x130
    Below are some useful information about the feed: * 3 pull rollers * forward / reverse rotation * speed control on the switch and additional...
    9500.00 €
    Hydraulické dýhovací lisy, použité
    maszynymdd
  • Compressor Ceccato DRM 50 37 kW
    Ceccato DRM 50
    The basic parameters of this compressor are: * capacity 6120 l / min at a maximum pressure of 8.5 bar * main engine power 37 kW (50 HP) *...
    6000.00 €
    Kompresory, Nové
    maszynymdd
  • Wide belt sanding SCM Sandya 110 CLK3G
    Hemag coroprofil 32
    * working width 11,000 mm * max working height 160 mm * 3 grinding aggregates: - the first steel shaft for calibration with a diameter of 230 mm...
    18000.00 €
    Čtyřstranná frézka, použité
    maszynymdd
  • Table saw Casolin Astra 5,5 kW
    Paoloni Fimal PF535A
    - saw blade diameter - currently 250 mm, maximum 400 mm - shaft with a diameter of 30 mm - disc lowered at an angle, up to 45 degrees - dial...
    7200.00 €
    Srovnávačky, použité
    maszynymdd
  • Edge sanding Samco Unilev15
    Samco Unilev 15
    * belt width 150 mm * adjustable shoe for sanding veneers on one side and "back" 13x76 cm on the other * table with an attachment for grinding...
    1500.00 €
    Hranové profilové brusky, použité
    maszynymdd
  • Brushing machine Olimpia 300 mm 2019 r. like NEW!
    Casolin PF530
    * max working width - 300 mm * max working height - 250 mm * minimum element length - 250 mm * 2 brush units with a diameter of 210 mm - the...
    5000.00 €
    Srovnávačky, použité
    maszynymdd
  • Wide belt sander CB 970 RR+t
    SCM f520 nova
    * working width 970 mm * max working height 160 mm * 2 grinding aggregates - the first aggregate equipped with two shafts, hard and soft with the...
    7200.00 €
    Srovnávačky, použité
    maszynymdd
  • Briquette machine Prodeco E 70 Eco
    Casadei Shark 8pi
    * inner diameter barrel and briquette 70 mm * 7.5 kW motor * sawdust tank with a volume of about 0.9 m3 and a diameter of 100 cm * regulation of...
    4500.00 €
    Formátovací pila - Stolová kotoučová, použité
    maszynymdd
  • Automatic multi-shelf rotary press for gluing plates, mechanical lignu
    Lignum -
    automatic multi-shelf rotary press for gluing plates, mechanical screwing with a pneumatic wrench. Original American production press, completely...
    Korpusové lisy, použité
    Lignum_Machines
  • Cleaver shear Holtec ASC 35-15
    Holtec ASC 35-15
    Cleaver shear Holtec ASC 35-15 Ref: C2774 With vibrating trough 5000 mm Section adjustment range : 50 to 250 mm Passage height : 150 mm...
    Kmenové pily, použité
    KAZITANI
  • Format saw Steton SC400 Second hand
    Steton SC400
    Format saw Steton SC400 Second hand Ref: C2629 cross guide 2500 mm parallel guide 1200 mm tilting blade manual tilt and rise / fall ideal...
    Srovnávačky, použité
    KAZITANI
  • Double drill chainsaw Essepigi RAPID 3000 Second hand
    Essepigi RAPID 3000
    Double drill chainsaw Essepigi RAPID 3000 Second hand Ref: C2566 Electric head spacing with programmer swivel heads 5-spindle drilling groups...
    Pokosová pila, použité
    KAZITANI
  • Pendulum chainsaw Stromab PS45F Second hand
    Stromab PS45F
    Pendulum chainsaw Stromab PS45F Second hand Ref: C2219 capacity 500 x 140 3000 mm roller table manual retractable stopper Blade diameter:...
    Pásové pily, použité
    KAZITANI
  • Sliding table saw miter stop DUPLEX ALTENDORF
    DUPLEX ALTENDORF -
    Sliding table saw miter stop DUPLEX ALTENDORF Ref: C2205 adjustable 0 ° -90 ° right / left graduation with 0.25 / division graduated ruler 1350...
    Stolová frézka, použité
    KAZITANI
  • Radial saw Lyon Flex RD 100 Second hand
    Lyonflex RD 100
    Radial saw Lyon Flex RD 100 Second hand Ref: 7447 Type of sawing: Cutting Blade diameter: 350 mm Motor: 4 CV
    Radiální pily, použité
    KAZITANI
  • Radial saw Lyon Flex Second hand
    Lyon Flex -
    Radial saw Lyon Flex Second hand Ref: 9708 Special for angled cutting of the edge and grooving for laying joint nails 1500 mm aluminum trolley...
    Formátovací pila - Stolová kotoučová, použité
    KAZITANI
  • Hydraulic frame presses goma pha 3500 lignum
    Goma pha 3500
    frame press GOMA PHA 3500 Door press hydraulic Location Gorzow Wlkp. Conditions of delivery PICK UP YOUR OWN Shipping cost To negotiate...
    Hydraulické dýhovací lisy, použité
    Lignum_Machines
  • Scie multilames saw Mitek CYBER Second hand
    Mitek CYBER
    Scie multilames saw Mitek CYBER Second hand Ref: C2726 Voltage: 400 V Power: 45 Kw Length: 11500 mm Width: 4000 mm Height: 2600 mm Weight:...
    Rozmítací pila, použité
    KAZITANI
  • Heavy radial saw groove tool Lyonflex RD100 Second hand
    Lyonflex RD100
    Heavy radial saw groove tool Lyonflex RD100 Second hand Ref: C2738 molding block 30/60 Ø 250 mm Blade diameter: 400 mm Cutting length: 1000 mm...
    Radiální pily, použité
    KAZITANI
  • Automatic double miter saw Cassese CS939 Second hand
    Cassese CS939
    Automatic double miter saw Cassese CS939 Second hand Ref: C2746 cut of MDF WOOD and PVC molding at 45 ° double horizontal blades inside rake...
    Rozmítací pila, použité
    KAZITANI
  • Format saw Altendorf F90 Second hand
    Altendorf F90
    Format saw Altendorf F90 Second hand Ref: C2860
    Formátovací pila - Stolová kotoučová, použité
    KAZITANI
  • Format saw Griggio SC3000 Second hand
    Griggio SC3000
    Format saw Griggio SC3000 Second hand Ref: C2915 Carriage 3200 mm Width at parallel fence 1050 mm Crosscut fence with extendable and adjustable...
    Formátovací pila - Stolová kotoučová, použité
    KAZITANI
  • Format saw Chambon 286 Second hand
    Chambon 286
    Format saw Chambon 286 Second hand Ref: C2935 Carriage 3200 mm Blade Ø max 400 mm Rotation speed 3000 / 4000 / 5000 rpm Electric rise/lower...
    Formátovací pila - Stolová kotoučová, použité
    KAZITANI
  • Band saw COLIOT LABOURO Second hand
    COLIOT LABOURO -
    Band saw COLIOT LABOURO Second hand Ref: C2962 Cast iron frame Wheel Blade 5600 x 35 mm max Cast iron table 950 x 900 mm Blade guide 4 kW...
    Pásové pily, použité
    KAZITANI
  • Format saw Altendorf F45 Second hand
    Altendorf F45
    Format saw Altendorf F45 Second hand Ref: C3018 Carriage 3200 mm with double rollers Blade Ø 400 mm, hydraulic tilting Transverse guide Double...
    Formátovací pila - Stolová kotoučová, použité
    KAZITANI
  • Panel saw Striebig Standard II Second hand
    Striebig Standard II
    Panel saw Striebig Standard II Second hand Ref: C3022 Useful height in vertical section 2200 mm Useful height in horizontal cut 2100 mm...
    Vertikální pily, použité
    KAZITANI
  • Multiblade edger SCM M3 Second hand
    SCM M3
    Multiblade edger SCM M3 Second hand Ref: C3036 Blade diameter: max 350 mm Cutting width: 350 mm Cutting height: 120 mm Feed speed: 6 to 48...
    Rozmítací pila, použité
    KAZITANI
  • Radial saw Lyonflex RD100 Second hand
    Lyonflex RD100
    Radial saw Lyonflex RD100 Second hand Ref: C3047 Frontal stroke 1100 mm Blade diameter 450 mm Tilting and swiveling blade right/left Cutting...
    Radiální pily, použité
    KAZITANI
  • Format saw SCM SI15WF Second hand
    SCM SI15WF
    Format saw SCM SI15WF Second hand Ref: C3049 Cutting height : 140 mm Cutting width : 850 mm Blade diameter 350 mm (max possible diameter 400 mm...
    Formátovací pila - Stolová kotoučová, použité
    KAZITANI
  • Panel saw Striebig STANDARD II TRK Second hand
    Striebig STANDARD II TRK
    Panel saw Striebig STANDARD II TRK Second hand Ref: C3059 (*) Useful height in vertical section 2200 mm Useful height in horizontal cut 2100 mm...
    Vertikální pily, použité
    KAZITANI
  • Format saw Altendorf F45 Second hand
    Altendorf F45
    Format saw Altendorf F45 Second hand Ref: C3064 Carriage length : 3000 mm Motor 7,5 kW 4 rotation speeds : 3000, 4000, 5000 and 6000 RPM...
    Formátovací pila - Stolová kotoučová, použité
    KAZITANI
  • Band saw 900 mm wheel Second hand
    - 900 mm
    Band saw 900 mm wheel Second hand Ref: C3074 Wheel diameter : 900 mm Cast iron table 1250 x 900 mm Mechanical brake Enclosed machine Blade...
    Pásové pily, použité
    KAZITANI
  • Mobile blade edger ACMA DM82 Second hand
    ACMA DM82
    Mobile blade edger ACMA DM82 Second hand Ref: C3088 Useful cutting length: 6200 mm Width at rip fence: 500 mm Selectable cutting height: 160 mm...
    Prodáno použitá spodní frézka, použité
    KAZITANI
  • Format saw SCM SI 3800 Second hand
    SCM SI 3800
    Format saw SCM SI 3800 Second hand Ref: C3089 Carriage length 3800 mm Motor 7,5 hp (3000 ; 4000 ; 5000 rpm) Main blade diameter 400 mm...
    Formátovací pila - Stolová kotoučová, použité
    KAZITANI
  • Format saw Altendorf F45 Second hand
    Altendorf F45
    Format saw Altendorf F45 Second hand Ref: C3096 Carriage length : 3400 mm Motor 7,5 kW 4 rotation speeds : 3000, 4000, 5000 and 6000 RPM...
    Formátovací pila - Stolová kotoučová, použité
    KAZITANI
  • Suction filter Ref: C3004.1 & C3005.3 & C3005.4
    - -
    Suction filter Ref: C3004.1...
    Sací zařízení, použité
    KAZITANI
  • Suction filter Girardeau Second hand
    Girardeau -
    Suction filter Girardeau Second hand Ref: C3004.2...
    Sací zařízení, použité
    KAZITANI
  • Vacuum filtration ATEX AFIII Secod hand
    Atex AFIII
    Vacuum filtration ATEX AFIII Secod hand Ref: C3042 72 cotton filter bags, diameter 200 mm Electrical cleaning 37kW pressure fan, diameter 450...
    Sací zařízení, použité
    KAZITANI
  • Mobile 1 bag bagger Second hand
    - -
    Mobile 1 bag bagger Second hand Ref: C3054 Pluging: Three-phased
    Sací zařízení, použité
    KAZITANI
  • Suction filtration Samsoud AF V 201 Second hand
    Samsoud AF V 201
    Suction filtration Samsoud AF V 201 Second hand Ref: C3076 Pluging: Three-phased
    Sací zařízení, použité
    KAZITANI
  • Suction filtration Fagida Second hand
    Fagida -
    Suction filtration Fagida Second hand Ref: C3077 Filter 42 filter bags ⌀ 250 mm, Height 2400 mm Filtering surface: 90 m2 Max flow rate: 13000...
    Sací zařízení, použité
    KAZITANI
  • Vacuum unit Atex SFC Second hand
    Atex SFC
    ATEX Vacuum unit Ref: C3095 Dimensions: 3000 x 3000 x 6000 mm 96 filter bags, length 2800 mm, diameter 250 mm Electrical unclogging ATEX fan...
    Sací zařízení, použité
    KAZITANI
  • Double tenoner Parveau LS Second hand
    Parveau LS
    Double tenoner Parveau LS Second hand Ref: C3006 Composition: Saw blade ⌀ 350 mm max. Max cutting height: 100 mm 2 max tool spindles 250 mm,...
    Čepovací frézka, použité
    KAZITANI
  • Tenoner Parveau Second hand C3052
    Parveau -
    Tenoner Parveau Second hand Ref: C3052 Saw blade Ø 350 mm Recoil 230 mm Spindle moulder 50 mm Long 170 mm Max Ø 320 mm Recoil 240 mm Cast...
    Čepovací frézka, použité
    KAZITANI
  • Upper planer UTIS R60 Second hand C3087
    Utis R60
    Upper planer UTIS R60 Second hand REF: C3087 Table width : 610 mm Table length : 1200 mm Useful height : 3 to 230 mm Motor 7,5 kW Shaft 4...
    Srovnávačky, použité
    KAZITANI
  • Planer GUILLIET Second hand C3090
    Guilliet -
    Planer GUILLIET Second hand C3090 Table width : 640 mm Table length : 1150 mm Useful height : 3 to 250 mm Motor 7,5 kW Shaft 4 irons,...
    Srovnávačky, použité
    KAZITANI
  • Router SCM T120C Second hand
    SCM T120C
    Router SCM T120C Second hand Ref: B1697 Cast iron table 1050 x 950 mm Feeder 3 rollers : 3 ; 5 ; 7,5 ; 10 ; 21 m/min Rotating guide ELBE...
    Stolová frézka, použité
    KAZITANI
  • Router Chambon T325 Second hand
    Chambon T325
    Router Chambon T325 Second hand Ref: C2920 Long table motor 5.5 hp Shaft 50 mm Long 200 mm Max Ø in the table 220 mm Max Ø in the fence 240...
    Stolová frézka, použité
    KAZITANI
  • Long table router SICAR SFL1000M Second hand
    SICAR SFL1000M
    Long table router SICAR SFL1000M Second hand Ref: C2966 Table 2500 mm with front extension Shaft 50 mm long 170 mm Max Ø of the tools 200 mm...
    Srovnávačky, použité
    KAZITANI
  • Router with feeder SCM T120C Second hand
    SCM T120C
    Router with feeder SCM T120C Second hand Ref: C3032 Cast iron table 1050 x 950 mm Feeder 3 rollers : 3 ; 5 ; 7,5 ; 10 ; 21 m/min Rotating guide...
    Stolová frézka, použité
    KAZITANI
  • Router SCM T120C Second hand
    SCM T120C
    Router SCM T120C Second hand Ref: C3051 Cast iron table 1050 x 950 mm Rotating guide Rolling table 5,5 hp motor Shaft diameter : 50 mm...
    Srovnávačky, použité
    KAZITANI
  • Long table router SCM T130 PLL Second hand
    SCM T130 PLL
    Long table router SCM T130 PLL Second hand Ref: C3092 Height control panel Digital adjustment of spindle height, fence, speed Cast iron table...
    Srovnávačky, použité
    KAZITANI

Stránky