Weinig Uniplan double-sided planer
Planing width 220mm
Planing height 15-120mm
Horizontal spindle power 2x 5.5kw
Spindle speed 6000r.p.m...
Čtyřstranná frézka, použité
Centauro R800 resaw
Wheel diameter 800mm
Maximum cutting height 400mm
Maximum saw width 80mm
Pulling roller height 235mm
Cutting band length...
Pásové pily, použité
Trimwex SLV-H-160 block press
Working length 3000mm
Working height 1260mm
Width
Hydraulic clamps
Number of upper clamps 7
Front clamp gates 4...
Hydraulické dýhovací lisy, použité
Weinig Unimat 23 four-sided planer
Working width 230mm
Working height 140mm
Number of spindles 7
Spindle arrangement
Bottom 7.5kw
Right 7.5kw...
Čtyřstranná frézka, použité
Holzkraft AH500 Planer-Thicknesser
Working width 500mm
Working height of thicknesser 240mm
4-knife shaft
4 traditional knives
2 thicknesser...
Srovnávačky, použité
Wyrówniarko-grubościówka SCM FS410 Szerokość robocza 410mm Wysokość robocza 240mm Wał z nożami tradycyjnymi Wał 3 nożowy Dwie prędkości...
Srovnávačky, použité
Frezarka dolnowrzecionowa Griggio T220
Średnica wrzecion 35mm
Wysokość całkowita wrzecion 150mm
Prędkość wrzeciona zmienna na paskach
Obroty...
Stolová frézka, použité
Casolin F45L Spindle Milling Machine
Spindle diameter 40mm
Total spindle height 220mm
Electric spindle height adjustment
Electric spindle angle...
Stolová frézka, použité
MITEK EASY CUT 828 carpentry saw
TOTAL LENGTH 15,000 mm
INCIPAL/RECEIVING BENCH 6,000 mm
HEIGHT/DEPTH 200 mm
WEIGHT 2,500 kg
COMPRESSED...
Pila na masiv, použité
Griggio TC200 Spindle Milling Machine with a Cart
Spindle diameter 35mm
Total spindle height 190mm
Longitudinal cart in the worktop
Carriage...
Stolová frézka, použité
Briquette press POR A6 Plus 1620h
Briquette diameter 60mm
Round briquette
Efficiency up to 100kg/h
Main engine with a power of 7.5kw
Hopper...
Briketovací lisy, použité
SCM K201 HF Edge Banding Machine
Glue Tank (Granulate)
Pre-Cutting Guillotine
Finish Cutting Saw
2 Milling Units for Edges Top/Bottom
2...
Opracování hran, použité
Weinig Unimat 500 four-sided planer
Working width 230mm
Working height 140mm
Number of spindles 6
Spindle arrangement
Bottom 5.5kw
Right...
Čtyřstranná frézka, použité
Sicma K1 format saw
Carriage length 1500mm
Cutting height 85mm
Saw size min/max 250/300mm
Rotation speed 4300 r.p.m
Motor power 3kw
Cutting...
Formátovací pila - Stolová kotoučová, použité
Minimax Router 800 overhead spindle milling machine
Spindle distance from arm 800 mm
Two-speed spindle motor with a power of 3/2.2 kW
Two...
Frézky, použité
I sell the fourside moulder Weinig POWERMAT 1000, year 2008
Feeding device Grasten Maskinservice
Working width 320mm
Working height 130mm
8...
Čtyřstranná frézka, použité
I sell the widebelt sanding machine COSTA K CCC 1350, year 2004.
Configuration:
55 KW steel calibration cylinder
45 KW hard rubber...
Širokopásová bruska, použité
Samco Unilev 15 Edge Sander
Belt dimensions 150 x 2170 mm
Two belt speeds
Adjustable shoe
Tabletop adjustable at an angle of 0-30 degrees...
Hranové brusky, použité
Weinig Unimat 500 four-sided planer
Working width 230mm
Working height 130mm
Number of spindles 6
Spindle arrangement:
Bottom 5.5kw
Right...
Čtyřstranná frézka, použité
CB RT1N 1100 Wide Belt Sander
Working width 1100mm
Working height 2-193mm
Number of sanding units 1
Sanding unit with a shoe
Pneumatic shoe...
Širokopásová bruska, použité
Ledinek EUROPLAN 400 4V+4F four-sided planer
planing cross-sections 400 x 300 mm
Chamfering corners
4 x 15 kW engines
feeder and discharge...
Čtyřstranná frézka, použité
Brodpol WP150 single-shaft multi-saw
Maximum width of the prism 500mm
Thickness of the cut material 30-150mm
Main engine with a power of 22kw...
Rozmítací pila, použité
I sell the CNC drilling machine with inserting BIESSE COMIL INSIDER KT2. Year 2002.
2 pcs. CNC drilling heads from top.
1 pcs. Grooving saw
2 pcs...
Narážečka kolíku, použité
I sell the CNC drilling machine with inserting BIESSE COMIL INSIDER KTC. Year 2002.
2 pcs. CNC drilling heads from top.
1 pcs. Glue spraying head...
Narážečka kolíku, použité
I sell the CNC accessories inserting machine with glue spraying BIESSE COMIL INSIDER IT2G. Year 2001.
2 Stk. CNC drawers slidings inserting from top...
Narážečka kolíku, použité
I sell the CNC drilling machine with inserting BIESSE COMIL INSIDER KT2. Year 1999.
2 pcs. CNC drilling heads from top.
1 pcs. Grooving saw
3 pcs...
Narážečka kolíku, použité
I sell the side glue spreader Fischer Ruckle FLA,
Year 1994.
Suitable for solid wood glulam boards production.
Throughfeed with...
Nanášečky lepidla, použité
I sell the wooden window assembly table OMGA BA825 (+A+U).
Year 2012
All complete. Very good condition.
Available immediately.
Pracovní stůl na montáž rámů, použité
I sell the throughfeed drilling machine with HOMAG BST440/30/D.
Year 1997
Configuration:
4+4 motors from under
1+1 motors from sides per 24...
Kolíkovačka, použité
I sell the automatic drilling machine KUSING.
Working width up to 1200mm
Magazine for elements
Configuration:
1+1 motors from sides
Atypic 2-...
Kolíkovačka, použité
I sell the complete set of machines for production of wooden dowels.
Year: 1993 - 2008
Brusa di Garboli TA30
L.Loser AA200
Moulders
Cutting...
Profilovačky, použité
Schroeder T20 double-sided tenoning machine
Schroeder double-sided tenoning machine, 6 heads per side. Top down, vertical down. The machine can make...
Přístroje na okna, použité
I sell the automatic optimising saw GreCon Dimter 2004, year 1992.
Input table automatic feeding / throughfeed system
Outut table
3 pcs....
Pokosová pila, použité
Head for a 4-sided planer h = 180 mm, 4 knives
Head for a 4-sided planer h = 180 mm, 4 knives. Diameter 125 mm, 4 knives, revolutions 6000 l/min,...
Tloušťkovačka, použité
Raimann saw height 90 mm chain width 250 mm machine after regeneration completely renovated engine 22 kW cutting width 250 mm shaft diameter 80 mm...
Rozmítací pila, použité
4-TON FORKLIFT FOR GAS INSTALLATION, FORK TRANSPORT, VERY GOOD CONDITION
MILEAGE 15160 HOURS
4-TON FORKLIFT FOR GAS INSTALLATION...
Vysokozdvižné vozíky, použité
Dmdk 35 pneumatic cross-cut saw
The DMDK-35 circular saw is used for cross-cutting wood. The maximum cutting width is 220 mm at a height of 35 mm....
Radiální pily, použité
Schleicher 3-unit drilling machine after lignum renovation
Schleicher 3-unit drilling machine after lignum renovation.
The machine is equipped...
Narážečka kolíku, použité
Boring and inserting machines Rilesa Vlg 2200 new 2023
Make:
Riles
Model:
Vlg 2200
Description:
Condition:
new
Year:
2023
Start...
Narážečka kolíku, Nové
SBF model 3W-586 1100mm calibrator with 3 belts:
- 1st roller belt D=150mm in 90 shore rubber
- 2nd roller belt D=200mm in 65 shore rubber...
Širokopásová bruska, použité
MJX 120 multi-shaft saw
cutting height 120 mm cutting width 350 37 kW engine
Rozmítací pila, použité
HESS door handle for aluminum and PVC lignum windows
HESS drill and handle. Single unit with pneumatic clamps. For PVC and ALU windows.
Hoblovací nástroje, použité
No. 4 angular heads + No. 4 toolholders - HSK63E
1) high speed angular head for horizontal tool
2) angular head for blade diameter 250 mm.
3)...
Obráběcí centrum, použité
Gomad horizontal drilling machine type WU 1 lignum
Gomad horizontal drilling machine, one unit, horizontal drilling. Net price incl. Year of...
Kolíkovačka, použité
Cod: (006639)
X axis working area: 2600 mm Y axis working area: 900 mm Total number of drilling spindles: 22
Obráběcí centrum, použité
I sell the double mitre saw OMGA TR2A.
Cutting length 390 - 3000mm
Cutting width max. 170mm
Cutting height max. 90mm
Tilting heads 0 + - 45...
Pokosová pila, použité
We sell this industrial Rip Saw/Edge saw to operations with a requirement for large-scale processing of lumber.
The machine is suitable for...
Pila na masiv, Nové
I will sell this middle category of Rip saw / Edge saw KUSING RP-OP-600 3.0.
It is a machine suitable for smaller operations processing primarily...
Pila na masiv, Nové
It is a profesional saw with one or two simultaneously digitally adjustable saw blades.
The control has a memory with 5 values for faster and...
Pila na masiv, Nové
I sell the double end cutting and tenoning machine SCM CONCEPT NT.
Working width up to 3000mm
Configuration left side / fix:
1 pc. cutting saw...
Čepovací frézka, použité
PRODUCT CODE: R38-16-652
Vacuum cleaner for professional carpentry
Vacuum cleaner with 4 outdoor bags
Year 2000 (CE)
Characteristics...
Průmyslové vysavače, použité
I sell the 3-axis CNC working centre HOLZ-HER ECO-MASTER 7113 with beam table
Year 2000.
Configuration:
3-axis main spindle 7,5 KW
Tool...
Obráběcí centrum, použité
I sell the 3-axis CNC working centre HOLZ-HER PRO-MASTER 7023 with beam table
Year 2009.
Configuration:
3-axis main spindle 6 KW
Tool magazine...
Obráběcí centrum, použité
I sell the format sliding table saw with scoring
Manufacutrer: FELDER
Model: K975
Year 2013
Cutting length 3200mm.
Cutting width 1350mm...
Formátovací pila - Stolová kotoučová, použité
