I sell the throughfeed drilling machine with dowel inserting Rilesa VLGD 2224,
Year 2009.
Working width up to 2200mm
Configuration:
1+1...
Narážečka kolíku, použité
I sell the throughfeed drilling machine Rilesa Rapid 1500, Year 2012.
Working width up to 1500mm
Configuration:
RAPID 2200:
1+1 motors from...
Narážečka kolíku, použité
I sell the fourside moulder Weinig POWERMAT 1000, year 2008
Feeding device Grasten Maskinservice
Working width 320mm
Working height 130mm
8...
Čtyřstranná frézka, použité
I sell the double mitre saw without scoring throughfeed COMEC TD2400 + CA.
Working width 250 to 2400mm.
Max. saw profile 80 x 100mm
Angular...
Pokosová pila, použité
I sell the widebelt sanding machine COSTA K CCC 1350, year 2004.
Configuration:
55 KW steel calibration cylinder
45 KW hard rubber...
Širokopásová bruska, použité
I sell the CNC drilling machine with inserting BIESSE COMIL INSIDER KT2. Year 2002.
2 pcs. CNC drilling heads from top.
1 pcs. Grooving saw
2 pcs...
Narážečka kolíku, použité
I sell the CNC drilling machine with inserting BIESSE COMIL INSIDER KTC. Year 2002.
2 pcs. CNC drilling heads from top.
1 pcs. Glue spraying head...
Narážečka kolíku, použité
I sell the CNC accessories inserting machine with glue spraying BIESSE COMIL INSIDER IT2G. Year 2001.
2 Stk. CNC drawers slidings inserting from top...
Narážečka kolíku, použité
I sell the CNC drilling machine with inserting BIESSE COMIL INSIDER KT2. Year 1999.
2 pcs. CNC drilling heads from top.
1 pcs. Grooving saw
3 pcs...
Narážečka kolíku, použité
I sell the side glue spreader Fischer Ruckle FLA,
Year 1994.
Suitable for solid wood glulam boards production.
Throughfeed with...
Nanášečky lepidla, použité
I sell the widebelt sanding machine VIET TARGET 321B 1100, year 1996.
Configuration:
Steel cylinder
Hard rubber cylinder
Soft...
Širokopásová bruska, použité
I sell the wooden window assembly table OMGA BA825 (+A+U).
Year 2012
All complete. Very good condition.
Available immediately.
Pracovní stůl na montáž rámů, použité
I sell the throughfeed drilling machine with HOMAG BST440/30/D.
Year 1997
Configuration:
4+4 motors from under
1+1 motors from sides per 24...
Kolíkovačka, použité
I sell the automatic drilling machine KUSING.
Working width up to 1200mm
Magazine for elements
Configuration:
1+1 motors from sides
Atypic 2-...
Kolíkovačka, použité
I sell the complete set of machines for production of wooden dowels.
Year: 1993 - 2008
Brusa di Garboli TA30
L.Loser AA200
Moulders
Cutting...
Profilovačky, použité
I sell the automatic optimising saw GreCon Dimter 2004, year 1992.
Input table automatic feeding / throughfeed system
Outut table
3 pcs....
Pokosová pila, použité
I sell the double mitre saw OMGA TR2A.
Cutting length 390 - 3000mm
Cutting width max. 170mm
Cutting height max. 90mm
Tilting heads 0 + - 45...
Pokosová pila, použité
We sell this industrial Rip Saw/Edge saw to operations with a requirement for large-scale processing of lumber.
The machine is suitable for...
Pila na masiv, Nové
I will sell this middle category of Rip saw / Edge saw KUSING RP-OP-600 3.0.
It is a machine suitable for smaller operations processing primarily...
Pila na masiv, Nové
It is a profesional saw with one or two simultaneously digitally adjustable saw blades.
The control has a memory with 5 values for faster and...
Pila na masiv, Nové
I sell the automatic finger joint line SMB Maschinenbau.
Input width 20-200mm
Input thickness 20-120mm
Automatic finger joint unit with...
Čepovací frézka, použité
I sell the double end cutting and tenoning machine SCM CONCEPT NT.
Working width up to 3000mm
Configuration left side / fix:
1 pc. cutting saw...
Čepovací frézka, použité
I sell the 3-axis CNC working centre HOLZ-HER ECO-MASTER 7113 with beam table
Year 2000.
Configuration:
3-axis main spindle 7,5 KW
Tool...
Obráběcí centrum, použité
I sell the 3-axis CNC working centre HOLZ-HER PRO-MASTER 7023 with beam table
Year 2009.
Configuration:
3-axis main spindle 6 KW
Tool magazine...
Obráběcí centrum, použité
I sell the format sliding table saw with scoring
Manufacutrer: FELDER
Model: K975
Year 2013
Cutting length 3200mm.
Cutting width 1350mm...
Formátovací pila - Stolová kotoučová, použité
I sell the horizontal foil and veneer wrapping machine
Producer: Unimak, Turkey
Model: PF35 F6PA
Year: 2021 / like NEW, almost not used...
Balení stroje, použité
I sell the vertical throughfeed CNC working centre SCM Morbidelli Cyflex S, Year 2016.
Configuration:
1 pc. Milling spindle 5,5 kW
12 + 4 + 2...
Obráběcí centrum, použité
I sell the format sliding table saw with scoring
Manufacutrer: OTTO MARTIN
Model: T60 Classic
Year 2007
Cutting length 3200mm.
Cutting...
Formátovací pila - Stolová kotoučová, použité
I sell the automatic pneumatic end cutting saw KuangYung PX60 CFS 200B, year 2012.
Motor power 7,5kW
Input table automatic feeding 5,10m (...
Pokosová pila, použité
I sell the combined surface planing - thicknessing machine SCM 2250.
Max. working width 510mm
Spindle 4-knives 510x120mm
Total weight 890kg...
Kombinované stroje, použité
I sell the complete saw mill angular saw + sorting device.
Manufacturer: Strojcad Michalovce, Slovakia
Model angular saw: D9 LH6
Model...
Kmenové pily, použité
I sell the automatic CNC working centre for BLOCK-HOUSE production Krüsi CM-40. Year 1994.
Incutting saw
Tenoning head Top + Bottom
Tenoning...
Obráběcí centrum, použité
I sell the fourside moulder Weinig Unimat 300
Feeding speed 5-30 m/min.
Working width 230mm
Working height 130mm
5 spindles
Configuration:...
Čtyřstranná hoblovka, použité
I sell the Hot Air drying tunnel BURKLE
Modell: Easy Dry JET 1300
Filter: TRDUE / 700 m3/hr.
Ventilator 7,5kW / 6800m3/hr. / 35 m/s
Working...
Sací zařízení, Nové
I sell the combined machine format sliding table saw with scoring + spindle moulder
Manufacutrer: FELDER Austria
Model: KF700S.
Year 2011....
Kombinované stroje, použité
I sell the vertical band saw Felder Hammer N4400.
Motor power 3,0KW
Suitable for saw bands up to 35mm.
Table tilting.
Year 2009
Condition very...
Pásové pily, použité
I sell the complete line with vertical foil wrapping machine.
Producer: MANEX, Slovakia
Feeding lines: HOMAG LIGMATECH
Model: TOSA 120
Year...
Balení stroje, použité
I sell the pneumatic end cutting saw Stromab TR350, year 2016.
Motor power 4,0kW
Saw blade diameter fi.350x30mm
Cutting schema ver.1 max. 210x30mm...
Pokosová pila, použité
I sell the new fourside moulder LEADERMAC COMPACT 430,
New machine year 2024. Showroom machine !
Configuration 4 spindles:
Bottom 7,...
Čtyřstranná hoblovka, Nové
I sell the new fourside moulder LEADERMAC COMPACT 623C (2M),
New machine year 2024. Showroom machine !
Configuration 6 spindles: ...
Čtyřstranná hoblovka, Nové
I sell the complete aspiration system ELBH
1x Ventilator 9kW
Total power 11.000 m3 / hr.
Recuperation system for returning the hot air back
Full...
Sací zařízení, použité
I sell the complete aspiration system LICHT-LOYDL
4x Ventilator 11kW
Total power apprx. 50.000 m3 / hr.
Recuperation system for returning the hot...
Sací zařízení, použité
I sell the complete aspiration system ELBH
5x Ventilator 7,5kW
Total power apprx. 45.000 m3 / hr.
Recuperation system for returning the hot air...
Sací zařízení, použité
I sell the new widebelt sanding machine Casadei Libra 45 RCT 110
Year 2022.
Configuration:
Steel moulding cylinder with spiral knives
Combi...
Širokopásová bruska, Nové
I sell the automatic CNC working centre for BLOCK-HOUSE production AUER BL100.
Year 2001.
Input table / Max. Element length 9,00m...
Čepovací frézka, použité
I sell the rip saw Raimann JRION HFS-170-3200.
Year 1995 / Kuper refurbished 2002.
Cutting length 3300mm.
Cutting height 170mm.
Main motor 11kW...
Pila na masiv, použité
I sell the vacuum wood drying klin ISVE ES 5
Wood volume apprx. 5m3 wood.
Chamber length 6,00m x dia 1,60m
Carriage trolley system. ...
Vakuová sušárna, použité
I sell the heavy duty fourside moulder GAU-JING 930D-CE.
Element max. 300x200mm !
Feeding speed up to 36m/min !
5,00m long infeed table hard...
Čtyřstranná hoblovka, použité
I sell the throughfeed double saw without scoring IDS Slovakia.
Working width up to 1800mm.
Magazine for elements
Available immediately.
I sell...
Pokosová pila, použité
I sell the multirip saw of italian production OGAM PO300.
Cutting height under the blade 120mm / possibility of adjustment
Width of cut on the feed...
Rozmítací pila, použité
I sell the multiple boring machine DETTEL M2232
22-spindle x distance 32mm
Turning head 0-90°
screw-quick-change bushes included. Type Vitap.
2...
Kolíkovačka, použité
I sell the sharpening machine for moulding heads TOS Svitavy.
Angular setting.
Very good condition.
Avialable immediately.
Stolní bruska, použité
I sell the combined surface planing - thicknessing machine with spiral head and mortising machine VITAL FS41NSD.
New machine year 2024 with...
Kombinované stroje, Nové
I sell the combined surface planing - thicknessing machine with spiral head and mortising machine VITAL FS32NSD.
New machine year 2024 with...
Kombinované stroje, Nové
