Single side edge bander IMA COMBIMA /K/I/R75/800/F/R2

Značka: 
Ima
Model: 
Combima /k/i/r75/800/f/r2
Popis: 

LMG025

► SQUARING AND EDGEBANDING MACHINE  SINGLE SIDED. Automatic machine to apply the edge into straight profiles  
GENERAL SPECIFICATIONS  
► Industrial machine with heavy-duty structure  
► Max. working panel height  with straight edge 14 - 60 mm  
► Applicable banding material in coils: thin edge and PVC up to 3 mm  
► Max. working width 4200 mm  
SYSTEM AND OPTIONALS OF THE PANEL HANDLING  
► Driving chain is rurring by roller bearings   
► Top pression unit made by motorized rubbered belt  
► Top pression unit with adjustable height in automatic by numerical control  
► Adjusting in continuos feeding speed   with regulation in automatic by numerical control 7 / 35 m/min  
► Input panel guide  is motorized and with adjusting in automatic by numerical control  
► Lateral bar with lines of idle wheels to support the panels  
► Automatic system to load the panel to introduct the piece in automatic and in perfect alignment ► Working capacity 20 cycles/min.  
WORKING UNITS ON THE SQUARING SIDE  
► Anti-gluing unit made by 2 guns that spray liquid on the top and bottom part of the panel  
► Pre milling unit to rectify the side of the panel. It is made by 2 motors with automatic in/out intervention to avoid splinters on the panel - motorized regulation of depth position in automatic by numerical control - motors power 4,5 KW ( 9000 RPM)  
GLUING UNIT, INSERTION AND PRESSION OF THE EDGE   
► Multiple magazine for edge coils with nr.   12 positions, to automatically change the edge type  - motorized regulation of height position in automatic by numerical control - Adjustable hanging command board to control  the edge type   
► Hot-melt glue pot  and premelter 30 Kg  
► Spreading roller to regulate the quantity of apllied glue  
► Guillotine to cut the edge in coils  
► Roller set to press the edge on straight profiles - nr.  1 + 4 pression rollers  - motorized regulation of depth position in automatic by numerical control  
WORKING UNITS ON THE EDGE BANDING  SIDE  
► End cutting unit with 2 motors to cut the excess edge on the front and back part of the panel - motors tiltable 0 /  25 degree - motors power 0,2 KW -  Max. working speed 32 m/min  
► Top and bottom rough trimming unit  - motors power 0,66 KW  
► Rounding unit multifunction  08. 353 with regulation in automatic by numerical control. This unit has a double functions: A) to trim and round off the excess edge B) to round the edge corners on the top and bottom part of the panel - double automatic  tool changer with magazine nr.  4 positions - motors power 0,4 KW -  Max. working speed 30 m/min  
► Edge scraping unit for the edge superfinishing    
► Glue scraping unit to remove the excess glue from the join between edge and panel  
► Brushing unit with   motors to clean and polish the upper and lower edge   - oscillating system  
► Superfinishing unit with spheres to finish and reactevate the colour on edges of plastic material  
CONTROL OF THE MACHINE AND ACCESSORIES  
► Control and program system  IMATRONIC - 150 with the following features: - pc - screen colour - CD-ROM reader  - keyboard  
► Adjustable separated command board to control the machine   
NORM AND OPTIONAL FOR THE SECURITY  
► Security norme CE mark  
► Safety and sound-proof enclosure  cabinet of the working units   
► Aspiration system on the top part of the safety enclosure  cabinet  

 

Kontakt

Obrázek uživatele Ferwood srl
FERWOOD SRL
ITALY
Pollenzo
+39 0172 474073

odesílat poštu autorovi

CAPTCHA
Potvrďte, že nejste robot: Tento Chek je pro testování zda jste či nejste člověk a ne, aby se zabránilo spamu.Potvrďte, že nejste robot. Aby se zabránilo spamu.

Vertical Tabs