ОДНОСТОРОННЫЙ КРОМКООБЛИЦОВОЧНЫЙ СТАНОК HOLZHER TRIATHLON 1487V
Страница для печатиPhotos
 |
     |
Технические данные
| Тип: | Деревообрабатывающие станки |
| Категория: | КРОМКООБЛИЦОВОЧНЫЙ СТАНОК |
| Местонахождение: | Italy |
| работа: | HOLZHER |
| модель: | TRIATHLON |
| год: | |
| Цена €: | |
► EDGE BANDER SINGLE SIDED. Automatic machine to apply the edge into straight profiles
GENERAL SPECIFICATIONS
► Machine condition: like new
► Applicable banding material in coils: thin edge and PVC up to 3 mm
► Applicable banding material in strips: solid wood
SYSTEM AND OPTIONALS OF THE PANEL HANDLING
► Running driving chain
► Top pression unit made by lines of idle wheels
► Top pression unit with adjustable height
► Input panel guide is motorized and with adjusting in automatic by numerical control
► Lateral bar with lines of idle wheels to support the panels
WORKING UNITS ON THE SQUARING SIDE
► Pre milling unit to rectify the side of the panel. It is made by 2 motors with automatic in/out intervention to avoid splinters on the panel - motors power 2 KW ( 12000 RPM)
GLUING UNIT, INSERTION AND PRESSION OF THE EDGE
► Support for edge coil
► Glue injecting system by cartridges
► Spreading roller to regulate the quantity of apllied glue
► Guillotine to cut the edge in coils
► Roller set to press the edge on straight profiles - nr. 1 + 2 pression rollers - motorized regulation of depth position in automatic by numerical control
WORKING UNITS ON THE EDGE BANDING SIDE
► End cutting unit with 2 motors to cut the excess edge on the front and back part of the panel - motors tiltable 0 / 10 degree - tilting regulation in automatic - motors power 0.35 KW ( 9000 RPM)
► Top and bottom rough trimming unit - motors power 0.5 KW ( 18000 RPM)
► Fine trimming unit to trim and round off the excess edge on the top and bottom part of the panel - motors tiltable 0 / 15 degree - motors power 2 x 0.6 KW ( 18000 RPM)
► Edge scraping unit for the edge superfinishing
► Rounding unit - nr. 1 motors to automatically round off the edge corners on the top and bottom part of the panel - motors power 0.6 KW ( 18000 RPM)
► Glue scraping unit to remove the excess glue from the join between edge and panel
► Brushing unit with 2 motors to clean and polish the upper and lower edge
► Belt sanding unit for flat edges - oscillating system
CONTROL OF THE MACHINE AND ACCESSORIES
► Control and program system HOLZHER - visual display
► Adjustable hanging command board to control the machine
► Incorporated electrical cabinet
NORM AND OPTIONAL FOR THE SECURITY
► Security norme CE mark
► Safety and sound-proof enclosure cabinet of the working units
► Aspiration system on the top part of the safety enclosure cabinet
| |
Отправить сообщение
Ferwood Srl +39 (0)172474073 Contact: sales@ferwood.it Web-Site: www.ferwood.it