GENERAL SPECIFICATIONS
 Industrial machine with heavy-duty structure
Applicable banding material in coils: thin edge and PVC up to 3 mm
Applicable banding material in strips: solid wood up to 12 mm
SYSTEM AND OPTIONALS OF THE PANEL HANDLING
Running driving chain
Top pression unit made by lines of idle wheels
Top pression unit with adjustable height
Input panel guide with adjusting by hand with visual unit
Lateral bar with lines of idle wheels to support the panels
WORKING UNITS ON THE SQUARING SIDE
Pre milling unit to rectify the side of the panel. It is made by 2 motors with automatic in/out intervention to avoid splinters on the panel - motors power 2.2 KW ( 12000 RPM)
GLUING UNIT, INSERTION AND PRESSION OF THE EDGE
Support for edge coil
Hot-melt glue pot
Spreading roller to regulate the quantity of applied glue
Guillotine to cut the edge in coils
Roller set to press the edge on straight profiles - nr. 1 + 4 pression rollers
WORKING UNITS ON THE EDGE BANDING SIDE
End cutting unit with 2 motors to cut the excess edge on the front and back part of the panel - motors tiltable 0 / 15 degree - motors power 0.35 KW ( 12000 RPM)
Top and bottom rough trimming unit - motors power 0,5 KW ( 12000 RPM)
Fine trimming unit to trim and round off the excess edge on the top and bottom part of the panel - motors tiltable 0 / 30 degree - motors power 0.5 KW ( 12000 RPM)
Rounding unit - nr. 4 motors to automatically round off the edge corners on the top and bottom part of the panel - motors power 0.5 KW ( 12000 RPM)
Edge scraping unit for the edge super finishing
Brushing unit with 2 motors to clean and polish the upper and lower edge
CONTROL OF THE MACHINE AND ACCESSORIES
Control and program system MAGELIS
Adjustable hanging command board to control the machine
 Incorporated electrical cabinet
NORM AND OPTIONAL FOR THE SECURITY
 Security norms CE mark
Safety and sound-proof enclosure cabinet of the working units