Printer-friendly versionWWW.ADSWOODWORKING.COM - WOODWORKING MACHINERY is a web-site where are listed advertisements of: woodworking machinery, woodworking machines, machining centers, woodworking equipment new and second hand. |
AUTOMATIC LINE FOR SQUARING AND EDGEBANDING BARGSTEDT + HOMAG
Photos
 |
     |
Technical data
| Type: | Woodworking machinery second hand |
| Category: | EDGEBANDERS |
| Location: | Italy |
| Make: | BARGSTEDT + HOMAG |
| Model: | TBH + KFL |
| Year: | |
| Quotation: | |
AUTOMATIC LINE FOR SQUARING AND EDGEBANDING WITH AUTOMATIC SYSTEM TO LOAD AND STACK PANELS
AUTOMATIC THROUGH-FEED LINE MADE BY
► POSITION 1 - OUR CODE: HME016 - TYPE: LOADER - BRAND: BARGSTEDT - MODEL: R TBH/22/D/30/14/S
AUTOMATIC SYSTEM TO LOAD PANELS in squaring-edgebanding line
GENERAL SPECIFICATIONS
► Industrial and fast system
► Machine condition: very good
► Double sides for the loading of the panels into the production line to avoid interruptions
► Panels workable also in double row
► Useful length of the panel 3000 mm
► Vacuum pump
SYSTEM AND OPTIONALS OF THE PANEL HANDLING
► Introduction of the panels row in the loading system through a motorized roller conveyor on the ground
► Exit of the support panel from the loading system through an idle roller conveyor on the ground
► Motorized transfer conveyor for the introduction of the panels into the production line - with comb-like frame to work panels in double row - approx. width 1500 mm - approx lenght 3000 mm
►Interior motorized lifting table
► Suction cup frame for the handling of the working panels that are lifted and put down through a vacuum system for the workpieces locking
► Suction cups for each horizontal bar
► Automatic device to detach the panels from the suction cups
CONTROL OF THE MACHINE AND ACCESSORIES
► Control and program system PC POWER CONTROL - pc - screen colour - CD-ROM reader - keyboard
► Adjustable separated command board to control the machine
► Separated electrical cabinet
NORM AND OPTIONAL FOR THE SECURITY
► Security norme CE mark
► Protection grids installed on the machine
► Total installed power 21 KW
► POSITION 2 - OUR CODE: HME017 - TYPE: DOUBLE SIDE SQUARING EDGE BANDER - BRAND: HOMAG - MODEL: KFL 525/7/A3/15
► SQUARING AND EDGEBANDING MACHINE DOUBLE SIDED. Automatic machine to apply the edge into straight profiles
GENERAL SPECIFICATIONS
► Industrial machine with heavy-duty structure
► Machine condition: very good
► Machine able to work as first position in a line
► Applicable banding material in coils: thin edge and PVC up to 3 mm
► Max. working width 1.500 mm
► Working units are installed on overtables to simultaneusly adjust them
SYSTEM AND OPTIONALS OF THE PANEL HANDLING
► Driving chain is rurring by roller bearings
► Chain extension length in entry 1000 mm (distance from the beginning of the chain to the machine cabinet)
► Top pression unit made by motorized rubbered belt
► Top pression unit with adjustable height in automatic by numerical control
► Adjusting in continuos feeding speed with regulation in automatic by numerical control 15 / 40 m/min
► Input panel guide
WORKING UNITS ON THE SQUARING SIDE FOR EACH SIDE
► Anti-gluing unit made by 2 guns that spray liquid on the top and bottom part of the panel
► Top and bottom double hogging unit - motors power 4.4 KW / 6.6 KW ( 3480 / 7080 RPM)
► Milling shaping unit - automatic in/out intervention - tiltable 0 - 90 degree - motor power 4.4 KW / 6.6 KW ( 3480 / 7080 RPM)
GLUING UNIT, INSERTION AND PRESSION OF THE EDGE FOR EACH SIDE
► Lamp zone to pre-heat the side of the panel
► Multiple magazine for edge coils with nr. 2 positions, to automatically change the edge type
► Hot-melt glue pot and premelter
► Spreading roller to regulate the quantity of apllied glue
► Guillotine to cut the edge in coils
► Roller set to press the edge on straight profiles - nr. 1 + 4 pression rollers - motorized regulation of depth position in automatic by numerical control
WORKING UNITS ON THE EDGE BANDING SIDE
► Milling shaping unit - tiltable 0 - 90 degree - motor power 4.4 / 6.6 KW ( 3480 / 7080 RPM)
► Top and bottom rough trimming unit - motors power 0.55 KW ( 12.000 RPM)
► Fine trimming unit to trim and round off the excess edge on the top and bottom part of the panel - motors power 0.4 KW ( 12.000 RPM)
► Free space to eventually add on request an additional working unit
► Edge scraping unit for the edge superfinishing
► Glue scraping unit to remove the excess glue from the join between edge and panel
► Brushing unit with 2 motors to clean and polish the upper and lower edge
CONTROL OF THE MACHINE AND ACCESSORIES
► Control and program system HOMATIC NC 21 with the following features: - screen colour - keyboard
► Adjustable hanging command board to control the machine
► Incorporated electrical cabinet
NORM AND OPTIONAL FOR THE SECURITY
► Security norme CE mark
► Safety and sound-proof enclosure cabinet of the working units
► Aspiration system on the top part of the safety enclosure cabinet
► POSITION 3 - OUR CODE: HME018 - TYPE: TURNING DEVICE FOR PANELS - BRAND: BARGSTEDT - MODEL: PROFI TD/31/30/12
AUTOMATIC SYSTEM TO TURN THE PANEL AT 90 DEGREE IN A PRODUCTION LINE
GENERAL SPECIFICATIONS
► Industrial and fast system
► Machine condition: very good
► Useful length of the panel 3000 mm
SYSTEM AND OPTIONALS OF THE PANEL HANDLING
► Automatic system to turn the panel from longitudinal sense to cross sense
► Rotation of the panel through double counter-placed cones
► Adjusting in continuos speed of the piece feeding with regulation in automatic by numerical control
CONTROL OF THE MACHINE AND ACCESSORIES
► Control and program system
► Incorporated electrical cabinet
NORM AND OPTIONAL FOR THE SECURITY
► Security norme CE mark
► Protection grids installed on the machine
► POSITION 4 - OUR CODE: HME019 - TYPE: DOUBLE SIDE SQUARING EDGE BANDER - BRAND: HOMAG - MODEL: KFL 526/9/A3/30
► SQUARING AND EDGEBANDING MACHINE DOUBLE SIDED. Automatic machine to apply the edge into straight profiles
GENERAL SPECIFICATIONS
► Industrial machine with heavy-duty structure
► Machine condition: very good
► Machine able to work both as first or second position in a line
► Applicable banding material in coils: thin edge and PVC up to 3 mm
► Max. working width 3000 mm
► Working units are installed on overtables to simultaneusly adjust them
SYSTEM AND OPTIONALS OF THE PANEL HANDLING
► Driving chain is rurring by roller bearings
► Chain extension length in entry 2000 mm (distance from the beginning of the chain to the machine cabinet)
► Top pression unit made by motorized rubbered belt
► Top pression unit with adjustable height in automatic by numerical control
► Adjusting in continuos feeding speed with regulation in automatic by numerical control 15 / 40 m/min
► Input panel guide
► Central bar with lines of idle wheels to support the panels
WORKING UNITS ON THE SQUARING SIDE FOR EACH SIDE
► Anti-gluing unit made by 2 guns that spray liquid on the top and bottom part of the panel
► Antisplint milling hogging unit - automatic in/out intervention - in vertical position - motor power 4.4 KW
► Top and bottom double hogging unit - motors power 4.4 / 6.6 KW ( 3480 / 7080 RPM)
► Free space to eventually add on request an additional working unit
GLUING UNIT, INSERTION AND PRESSION OF THE EDGE FOR EACH SIDE
► Lamp zone to pre-heat the side of the panel
► Multiple magazine for edge coils with nr. 2 positions, to automatically change the edge type
► Hot-melt glue pot and premelter
► Spreading roller to regulate the quantity of apllied glue
► Guillotine to cut the edge in coils
► Roller set to press the edge on straight profiles - nr. 1 + 4 pression rollers - motorized regulation of depth position in automatic by numerical control
WORKING UNITS ON THE EDGE BANDING SIDE FOR EACH SIDE
► End cutting unit with 2 motors to cut the excess edge on the front and back part of the panel - motors tiltable 0 / 15 degree - motors power 0.4 KW ( 12000 RPM)
► Top and bottom rough trimming unit - motors power 0.55 KW ( 12000 RPM)
► Double multifunction unit FK 21/30 with regulation in automatic by numerical control. This unit has a double functions: A) to trim and round off the excess edge B) to round the edge corners on the top and bottom part of the panel
► Milling shaping unit - automatic in/out intervention - tiltable 0 - 90 degree - motor power 4 / 5 KW ( 9600 / 11600 RPM)
► Edge scraping unit for the edge superfinishing
► Glue scraping unit to remove the excess glue from the join between edge and panel
► Brushing unit with 2 motors to clean and polish the upper and lower edge - oscillating system
CONTROL OF THE MACHINE AND ACCESSORIES
► Control and program system HOMATIC NC 21 with the following features: - screen colour - keyboard
► Adjustable hanging command board to control the machine
► Incorporated electrical cabinet
NORM AND OPTIONAL FOR THE SECURITY
► Security norme CE mark
► Safety and sound-proof enclosure cabinet of the working units
► Aspiration system on the top part of the safety enclosure cabinet
► POSITION 5 - OUR CODE: HME020 - TYPE: TURNING DEVICE FOR PANELS - BRAND: BARGSTEDT - MODEL: TD 520/30/12
AUTOMATIC SYSTEM TO TURN THE PANEL AT 90 DEGREE IN A PRODUCTION LINE
GENERAL SPECIFICATIONS
► Industrial and fast system
► Machine condition: very good
► Useful length of the panel 3000 mm
SYSTEM AND OPTIONALS OF THE PANEL HANDLING
► Automatic system to turn the panel from longitudinal sense to cross sense
► Rotation of the panel through double counter-placed cones
► Adjusting in continuos speed of the piece feeding with regulation in automatic by numerical control
CONTROL OF THE MACHINE AND ACCESSORIES
► Control and program system
► Incorporated electrical cabinet
NORM AND OPTIONAL FOR THE SECURITY
► Security norme CE mark
► Protection grids installed on the machine
► POSITION 6 - OUR CODE: HME021 - TYPE: STACKER - BRAND: BARGSTEDT - MODEL: R TSP 15/D/30/12
AUTOMATIC SYSTEM TO STACK PANELS in squaring-edgebanding line
GENERAL SPECIFICATIONS
► Industrial and fast system
► Machine condition: very good
► Double sides for the stacking of the panels of the production line to avoid interruptions
► Panels workable also in double row
► Useful length of the panel 3000 mm
► Vacuum pump
SYSTEM AND OPTIONALS OF THE PANEL HANDLING
► Introduction of support panel in the stacking system through an idle roller conveyor on the ground
► Exit of the panels row from the stacking system through a motorized roller conveyor on the ground
► Motorized transfer conveyor for the receiving of the panels from the production line - with comb-like frame to work panels in double row
► Suction cup frame for the handling of the working panels that are lifted and put down through a vacuum system for the workpieces locking
► Suction cups for each horizontal bar
► Automatic device to detach the panels from the suction cups
CONTROL OF THE MACHINE AND ACCESSORIES
► Control and program system PC POWER CONTROL with the following features: - screen colour - CD-ROM reader - keyboard
► Adjustable separated command board to control the machine
► Separated electrical cabinet
NORM AND OPTIONAL FOR THE SECURITY
► Security norme CE mark
► Protection grids installed on the machine
Technical data will be checked when the machine will be in our warehouses
| |
Contact
Ferwood Srl - Tel. +39 (0)172474073 - E-mail sales@ferwood.it - Web www.ferwood.it